Refine Your Search

Search Results

Viewing 1 to 7 of 7
Technical Paper

Optical Strain Measurement- Experimental Tool for Validating Sheet Metal Forming Analysis

2006-10-31
2006-01-3577
Automotive sheet metal components involve complex geometry and large surface areas. In addition to complex geometry, thrust for reduction of the new product development cycle demands for virtual simulation before prototyping. However in order to validate the simulation parameters, the numerical model needs to be experimentally verified. Conventional strain measurement techniques like Mylar tape, Traveling microscope are tedious and error prone for sheet metal forming analysis. Recently, optical strain measurement techniques are being used in sheet metal forming industry. Through this, strain measurement is more accurate, less time consuming and repeatable. This paper discusses a case study in which the analysis results of an automotive sheet metal component are experimentally validated by circular grid analysis using an optical strain measurement method. The circular grids are marked in the sheet metal blanks by screen-printing.
Technical Paper

Evolution of Bus Design in India

2013-11-27
2013-01-2764
Buses have been main means of mass transport in organized as well as unorganized sectors in India. Though the art and science of Chassis Designing had been practiced and matured by all Indian OEMs, Body design had long not been accorded high priority by them. Till 1989, there was no comprehensive set of rules enforced. Bus designs were developed with scant regard for safety and emission. OEMs sold their products in the form of drive away chassis and the Body Design & Body Building was largely left to Body Builders, many of whom employed poor design, build and quality control practices. Spurious materials, parts, non-uniform construction resulted in number of accidents and many of them were fatal. Central Motor Vehicle Rules (CMVR) kicked-in 1st July 1989. With roll out of CMVR, various safety related features like entry/exit door, emergency exits, window frames, their locations, dimensions and designs were defined.
Technical Paper

Heuristic Approach for Part Number Minimization during New Product Development in Automobile Industry

2012-09-24
2012-01-2054
The goal of any Lean organization is to understand customer value and to focus its efforts to continuously increase it. Lean applies to every business and every process and so is applicable for New Product Development (NPD) in Automobile industry, where the major output is the vehicle part numbers. Part numbers are generated based on the variant tree finalized. Customer requirements, benchmarks and organization assets such as lessons learnt and historical information provide input to the variant tree. Parts numbers for a particular model are generated during the concept Bill of Materials (BOM) stage and after which it exists during the complete product life cycle. Part number generation includes considerable effort by the design team, the validation team, and also includes overheads on the Product Life cycle Management (PLM) system.
Technical Paper

FE Analysis of ECER 29 Load Cases and its Correlation with Test Results

2013-11-27
2013-01-2806
The application of virtual simulations of crash has become an integral part of the vehicle development process. Virtual simulation offers opportunities to reduce development time and the number of physical prototypes consumed for design verification and validation. With the continuously increase of new accident and regulatory scenarios the dependency to virtual simulation and validation is becoming an inseparable factor in product development. This paper presents simulations that are performed to verify various safety aspects to ensure crashworthiness of the truck cabin. The cabin structure was evaluated for various load cases as per ECER 29 rev 2.0 safety regulation [1]. The FE model and simulation methodology was validated through physical testing and correlated for frontal impact test and roof strength test as per AIS 029/ECE-R 29 rev 2.0 [2]. Paper also discuss on the issue faced in correlation of test vs. Virtual validation using explicit solver.
Technical Paper

Durability Enhancement of Powertrain Mounts for an Off-Road Commercial Vehicle

2014-09-30
2014-01-2312
The durability of the components in a vehicle plays one of the major roles in its life cycle cost. The powertrain mount is one such component since its rubber characteristics have significant impact on the vehicle's NVH and fatigue life. This paper presents the enhanced durability benefits obtained by changing the polymer composition, manufacturing methods and design optimization of a powertrain mount for an off-road commercial vehicle. The methodology involved characterization[2] of the existing mount, arriving a new compound formulation, making of prototypes, experimental validation for durability[3] and repeatability in the laboratory combined with rigorous on field vehicle trials. NVH measurements were also carried out on the improved mounts. The above exhaustive exercise resulted in the development of a comprehensively far better mount than an existing mount with improved durability without compromise on NVH properties.
Technical Paper

Field Failure Simulation of a Non-reactive Suspension Tie Rod for Heavy Commercial Vehicle Using a Road Simulator

2019-01-09
2019-26-0350
The suspension system in a vehicle isolates the frame and body from road shocks and vibrations which would otherwise be transferred to the passengers and goods. Heavier goods vehicles use tandem axles at the rear for load carrying. Both the axles should be inter-connected to eliminate overloading of any one axle when this goes over a bump or a ditch. One of the inter-connecting mechanism used is leaf spring with tie rod, bell crank & linkages, when the first rear axle moves over a bump, the linkages equalize the loading on the second rear axle. This paper details about the failure analysis methodology to simulate the tie rod field failure using a six poster road simulator and to identify the root cause of the failure and further corrective actions.
Technical Paper

Coupled FEM-DEM for Determination of Payload Distribution on Tipper Load Body

2024-01-16
2024-26-0255
Tippers used for transporting blue metal, construction and mining material is designed with different types of load body to suit the material being carried, capacity and its application. These load bodies are constructed with high strength material to withstand forces under various operating conditions. Structural strength verification of load body using FEM is conducted, by modelling forces due to payload as a pressure function on the panels of the load body. The spatial variation of pressure is typically assumed. In discrete element method (DEM) granular payload material such as gravel, wet or dry sand, coal etc., can be modelled by accounting its flow and interaction with structure of load body for prediction of force/pressure distribution. In this paper, coupled FE-DEM is used for determining pressure distribution on loading surfaces of a tipper body structure of a heavy commercial vehicle during loading, unloading and transportation.
X