Criteria

Text:
Display:

Results

Viewing 1 to 30 of 45
CURRENT
2013-10-29
Standard
J920_201310
This Recommended Practice applies to technical publications which present instructions for the proper unloading, set-up, installations, pre-delivery inspection, operation, and servicing of off-road self-propelled work machines as categorized in SAE J1116. Advertising/marketing and other pre-purchase publications are not included.
HISTORICAL
1985-09-01
Standard
J920_198509
This recommended practice is to assist in the development of Technical Publications which will stress injury prevention and uniformity of format and content. This recommended practice is intended to be a guideline for technical publications based upon current knowledge, the state-of-the-art, and prevailing requirements.
CURRENT
2012-05-02
Standard
J1069_201205
This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)
HISTORICAL
2007-03-20
Standard
J1069_200703
This SAE Recommended Practice is to outline those procedures and practices which govern the use of an oil change system for quick service of construction and industrial machines as defined in SAE J1116. It will allow owners of a variety of machines to standardize on the quick-disconnect coupling system of their choice. This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil compartment. This practice may also by applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27.)
CURRENT
2011-12-06
Standard
J896_201112
This SAE Recommended Practice shows mounting flange dimensions for engine accessory drives such as pulleys, extended shaft flanges, and coupling halves.
HISTORICAL
1983-05-01
Standard
J896_198305
This SAE Recommended Practice shows mounting flange dimensions for engine accessory drives such as pulleys, extended shaft flanges, and coupling halves.
CURRENT
1993-04-01
Standard
J717_199304
This SAE Standard establishes specifications for mid- and side-power take-off drives that will be helpful in designing implements. Design of the implement attaching means must be tailored to each tractor, depending on attaching points available and the exact location of the auxiliary shaft.
HISTORICAL
1982-06-01
Standard
J753_198206
Instructions on this chart are intended to be used as a ready reference by personnel responsible for servicing off-road self-propelled work machines described in SAE J1116, categories 1, 2, 3, and 4. Detailed maintenance and service guidelines are reserved for maintenance, operator, and lubrication manuals as defined in SAE J920.
HISTORICAL
1991-05-01
Standard
J753_199105
Instructions on this chart are intended to be used as a ready reference by personnel responsible for servicing off-road self-propelled work machines described in SAE J1116, categories 1, 2, 3, and 4. Detailed maintenance and service guidelines are reserved for maintenance, operator, and lubrication manuals as defined in SAE J920.
HISTORICAL
2006-06-05
Standard
J753_200606
Instructions on this chart are intended to be used as a ready reference by personnel responsible for servicing off-road self-propelled work machines described in SAE J1116, categories 1, 2, 3, and 4. Detailed maintenance and service guidelines are reserved for maintenance, operator, and lubrication manuals as defined in SAE J920.
CURRENT
2011-10-27
Standard
J753_201110
Instructions on this chart are intended to be used as a ready reference by personnel responsible for servicing off-road self-propelled work machines described in SAE J1116, categories 1, 2, 3, and 4. Detailed maintenance and service guidelines are reserved for maintenance, operator, and lubrication manuals as defined in SAE J920.
HISTORICAL
1991-03-01
Standard
J817/2_199103
This SAE Information Report establishes a point system that encourages ease of maintenance actions on off-road work machines. The point system minimizes subjectivity in evaluating maintainability as defined in SAE J817/1.
HISTORICAL
1991-03-01
Standard
J817/1_199103
This SAE Information Report establishes a hierarchy of Product Effectiveness, defines Serviceability, Maintainability, Repairability, and Diagnostics, and relates them to Product Effectiveness. Effectiveness of this procedure depends on its use during early stages of design. This document applies to machines defined in J1057 and categorized in J1116.
CURRENT
2007-10-11
Standard
J1032_200710
The purpose of this SAE Recommended Practice is to provide a set of recognized definitions as a universally understood means of communication among all people interested in the inherent availability of off-Road Work machines. It is not the intent of this document to provide an absolute measure of unit availability. The intent is to provide common definitions for classifying and evaluating operation, repair, and maintenance data. This recommended practice applies to construction and general purpose industrial machines as categorized in SAE J1116. It describes the parameters related to the inherent availability of the covered classes of Off-Road Self-Propelled Work Machines.
HISTORICAL
1985-10-01
Standard
J1092_198510
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
HISTORICAL
1977-06-01
Standard
J1092_197706
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
HISTORICAL
1986-06-01
Standard
J1092_198606
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
CURRENT
2003-05-13
Standard
J1092_200305
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
CURRENT
2016-05-20
Standard
J371_201605
This SAE Recommended Practice applies to off-road, self-propelled work machine categories of earthmoving, forestry, road building and maintenance, and specialized mining machinery as defined in SAE J1116.,
HISTORICAL
2010-05-11
Standard
J371_201005
This SAE Recommended Practice applies to off-road, self-propelled work machine categories of earthmoving, forestry, road building and maintenance, and specialized mining machinery as defined in SAE J1116.,
HISTORICAL
2006-06-05
Standard
J371_200606
This SAE Recommended Practice applies to off-road, self-propelled work machines as defined in SAE J1116, Categories 1, 2, 4, and 5. Plugs are extensively used in off-road, self-propelled work machines as defined in SAE J1116. Loss of these plugs, stripping of the threads, or failure to tighten because of difficulty in finding the right tool can result in serious damage and/or increased down time. All the plugs listed are nominal inch sizes pending the development of metric plug standards. The purpose of this document is to standardize and, therefore, minimize the number of sizes and types of drain, fill, and level plugs required. It also establishes types and sizes of pipe thread and straight thread plugs requiring commercially available hand tools for removal and installation. It is not intended to establish dimensions and materials.
HISTORICAL
1978-03-01
Standard
J371A_197803
This SAE Recommended Practice applies to off-road, self-propelled work machines as defined in SAE J1116, Categories 1, 2, 4, and 5. Plugs are extensively used in off-road, self-propelled work machines as defined in SAE J1116. Loss of these plugs, stripping of the threads, or failure to tighten because of difficulty in finding the right tool can result in serious damage and/or increased down time. All the plugs listed are nominal inch sizes pending the development of metric plug standards. The purpose of this document is to standardize and, therefore, minimize the number of sizes and types of drain, fill, and level plugs required. It also establishes types and sizes of pipe thread and straight thread plugs requiring commercially available hand tools for removal and installation. It is not intended to establish dimensions and materials.
HISTORICAL
1985-07-01
Standard
J371_198507
This SAE Recommended Practice applies to off-road, self-propelled work machines as defined in SAE J1116, Categories 1, 2, 4, and 5. Plugs are extensively used in off-road, self-propelled work machines as defined in SAE J1116. Loss of these plugs, stripping of the threads, or failure to tighten because of difficulty in finding the right tool can result in serious damage and/or increased down time. All the plugs listed are nominal inch sizes pending the development of metric plug standards. The purpose of this document is to standardize and, therefore, minimize the number of sizes and types of drain, fill, and level plugs required. It also establishes types and sizes of pipe thread and straight thread plugs requiring commercially available hand tools for removal and installation. It is not intended to establish dimensions and materials.
HISTORICAL
1983-09-01
Standard
J48_198309
This SAE Recommended Practice pertains to liquid level determination for any compartment of off-road machinery as defined in SAE J1116 and J1057.
HISTORICAL
1993-05-01
Standard
J48_199305
This SAE Recommended Practice pertains to liquid level determination for any compartment of off-road machinery as defined in SAE J1116 and J1057.
HISTORICAL
2007-04-30
Standard
J48_200704
This SAE Recommended Practice pertains to liquid level determination for any compartment of off-road machinery as defined in SAE J1116 and J1057.
CURRENT
2017-02-08
Standard
J48_201702
This SAE Recommended Practice pertains to liquid level determination for any fluid compartment of off-road work machines as defined in SAE J1116 and ISO 6165.
CURRENT
2009-04-02
Standard
J283_200904
The lift capacity can be determined by Section 4 and/or Section 5. When the results are recorded, the test method shall be identified.
CURRENT
2014-09-09
Standard
J176_201409
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L, although fast fill fueling can be used on machines with smaller fuel capacity.
HISTORICAL
2006-08-21
Standard
J176_200608
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. A fast fueling system incorporates a fueling receiver through which fuel is conveyed to the fuel tank and an automatic shut-off vent to provide automatic fill level control, normal and emergency venting. The purpose of this document is to define the proper installation, position, protection, and size of a fueling receiver and automatic shut-off vent connections. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L or as applicable on machines with less capacity.
Viewing 1 to 30 of 45