Refine Your Search

Date

Date

Topic

Topic

Commercial Vehicle Small Engine and Powered Equipment Committee

Search Results

Viewing 1 to 20 of 21
12Next >Last >>
Sort by relevance
Standard

SMALL SPARK IGNITION ENGINE TEST CODE
1974-06-01
HISTORICAL
J607A_197406
The purpose of this code is to provide a uniform means of comparing small gasoline engines. It is not intended as a laboratory manual. The code is considered the nearest present-day practical approach. Governor characteristics are considered part of the end item specification.
Standard

Small Spark Ignition Engine Test Code
1988-08-25
CURRENT
J607_198808
The purpose of this code is to prove a uniform means of comparing small gasoline engines of 0.82 L (50 in3) or less in displacement and 15.1 kW (20 hp) or less in power output. It is not intended as a laboratory manual. Governor characteristics are considered part of the end item specification. Replaced with J1349
Standard

Tapped and Flanged Exhaust Connections for Small Engines
2001-07-31
CURRENT
J624_200107
This SAE Recommended Practice applies to domestic four-cycle air- and water-cooled engines having a maximum of 14.9 kW (20 hp) or less in power output and/or 0.82 L (50 in3) or less in displacement, with horizontal or vertical crankshafts. The engine shall be furnished with a minimum of either a tapped exhaust port or two tapped holes and flat port face making possible use of a threaded connector or one of the flanges shown in Figure 1. Exhaust flanges are sized to be used with mild steel or aluminized steel butt-welded tubing.
Standard

TAPPED AND FLANGED EXHAUST CONNECTIONS FOR SMALL ENGINES
1984-06-01
HISTORICAL
J624_198406
This recommended practice applies to domestic four-cycle air- and water-cooled engines having a maximum of 20 hp (14.9 kW) or less in power output and/or 50 in3 (0.82 L) or less in displacement, with horizontal or vertical crankshafts.
Standard

TAPPED AND FLANGED EXHAUST CONNECTIONS FOR SMALL ENGINES
1989-09-01
HISTORICAL
J624_198909
This SAE Recommended Practice applies to domestic four-cycle air- and water-cooled engines having a maximum of 20 hp (14.9 kW) or less in power output and/or 50 in3 (0.82 L) or less in displacement, with horizontal or vertical crankshafts.
Standard

Bystander Sound Level Measurement Procedure for Small Engine Powered Equipment
2012-05-11
CURRENT
J1175_201205
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the bystandard sound level of engine powered equipment under 15 kW (20 bhp) typical of their normal operation. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories and buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. The SAE Recommended Practice may also be used when measuring the bystander sound level on similar equipment powered by electricity or other power sources.
Standard

OPERATOR EAR SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT
1977-10-01
HISTORICAL
J1174_197710
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the operator ear sound level for engine powered equipment under 15 kW (20 bhp). The sound levels obtained by using this procedure are representative of the sound levels generated by the equipment under typical operating conditions. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories or buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. This SAE Recommended Practice may also be used when measuring the operator ear sound level of similar equipment powered by electricity or other power sources.
Standard

OPERATOR EAR SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT
1985-03-01
HISTORICAL
J1174_198503
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the operator ear sound level for engine powered equipment under 15 kW (20 bhp). The sound levels obtained by using this procedure are representative of the sound levels generated by the equipment under typical operating conditions. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories or buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. This SAE Recommended Practice may also be used when measuring the operator ear sound level of similar equipment powered by electricity or other power sources.
Standard

BYSTANDER SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT
1985-03-01
HISTORICAL
J1175_198503
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the bystander sound level of engine powered equipment under 15 kW (20 bhp) typical of their normal operation. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories and buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. This SAE Recommended Practice may also be used when measuring the bystander sound level on similar equipment powered by electricity or other power sources.
Standard

BYSTANDER SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT
1977-10-01
HISTORICAL
J1175_197710
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the bystander sound level of engine powered equipment under 15 kW (20 bhp) typical of their normal operation. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories and buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. This SAE Recommended Practice may also be used when measuring the bystander sound level on similar equipment powered by electricity or other power sources.
Standard

TEST PROCEDURE FOR THE MEASUREMENT OF GASEOUS EXHAUST EMISSIONS FROM SMALL UTILITY ENGINES
1993-02-01
HISTORICAL
J1088_199302
This SAE Recommended Practice specifies a uniform procedure for the evaluation of gaseous exhaust emissions from small utility engines typically less than 20 kW. Details of engine test setup and exhaust gas analysis techniques are specified with the intent of providing a uniform and reproducible method of measurement. The intent has been to allow as much flexibility as possible in the physical construction of the experimental apparatus. Therefore, only those portions of the apparatus whose operation is critical to the accurate measurement of emissions levels are prescribed in detail. An engine test procedure including a test sequence is outlined such that it would cover the various applications in which small engines are used. The intent is to provide an understanding of the levels of exhaust emissions and does not imply that in a given application, an engine would operate in all the modes outlined in the test procedure.
Standard

Small Engine Power and Torque Rating Procedure
2002-05-29
HISTORICAL
J1940_200205
This SAE Standard is applicable to small spark and compression ignition engines, having a maximum of 1.0 L sweep volume displacement, which are commonly operated outdoors, powering lawn and garden, construction, and general utility equipment. It is not intended to cover engines powering boats.
Standard

Small Engine Power and Torque Rating Procedure
2012-10-15
CURRENT
J1940_201210
This SAE Standard is applicable to small spark ignition and compression ignition engines, having a maximum of 1.0 L swept volume displacement, powering off-road applications such as lawn and garden, construction, general utility equipment, and off-highway recreational vehicles. It is not intended to cover engines powering on-road vehicles, motorcycles, or boats.
12Next >Last >>
X