Search Results

Standard

Heavy Duty Vehicle Lubricating Greases

2005-08-11

J2695_200508

This SAE Recommended Practice was developed by SAE, and the section “Standard Classification and Specification for Service Greases” cooperatively with ASTM, and NLGI. It is intended to assist those concerned with the design of heavy duty vehicle components, and with the selection and marketing of greases for the lubrication of certain of those components on heavy duty vehicles like trucks and buses. The information contained herein will be helpful in understanding the terms related to properties, designations, and service applications of heavy duty vehicle greases.

Standard

Tire Size Differential - Articulated Wheel Loader

2019-11-20

J2204_201911

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER

1994-05-01

J2204_199405

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

Antilock Brake Systems Energy Consumption Test Procedure for Air-Brake-Equipped Truck Tractors, Buses, Trailers, and Dollies

2019-10-07

J2255_201910

This SAE Recommended Practice provides instructions and test procedures for measuring air consumption of air braked vehicles equipped with Antilock Brake Systems (ABS) used on highways.

Standard

Truck and Bus Aerodynamic Device and Concept Terminology

2019-08-02

J2971_201908

This SAE J2971 Recommended Practice describes a standard naming convention of aerodynamic devices and technologies used to control aerodynamic forces on truck and buses weighing more than 10000 pounds (including trailers).

Standard

Truck and Bus Aerodynamic Device and Concept Terminology

2013-04-09

J2971_201304

This SAE J2971 Recommended Practice Truck and Bus Aerodynamic Device Terminology document describes a standard naming convention of aerodynamic devices and technologies used to control aerodynamic forces on truck and buses weighing more than 10,000 pounds (including trailers).

Standard

TEST CODE—TRUCK, TRUCK-TRACTOR, AND TRAILER AIR SERVICE BRAKE SYSTEM PNEUMATIC PRESSURE AND TIME LEVELS

1976-06-01

J982A_197606

This SAE Recommended Practice establishes a test procedure for measuring pneumatic system differentials and time relationships for 125 psig (862 kPa) nominal air pressure brake systems.

Standard

Recreation Off-Road Vehicle Product Identification Numbering System

2012-05-07

ICS1000_201205

This document specifies the format, content and parameters for a product identification numbering system for off-road recreation vehicles, based on the PIN structure for earth-moving machinery in ISO 10261:2002E and is not applicable to the identification of components or attachments. This standard applies only to the off-road recreation vehicle industry and does not impose parameters for the marine, lawn and garden, silviculture, husbandry, construction or earth moving sectors.

Standard

LIGHTING AND MARKING OF AGRICULTURAL EQUIPMENT ON HIGHWAYS

1977-06-01

J137C_197706

Standard

Terminology for Light and Medium Duty Trailers and Components

2017-01-17

J3085_201701

This SAE standard is intended to create standard terminology related to light and medium duty trailer applications. This includes such trailer types as utility, boat, camping, travel, and special purpose trailers which are normally towed by conventional passenger cars, light-duty commercial vehicles, light trucks, and multipurpose passenger vehicles.

Standard

COMPONENT NOMENCLATURE—DUMPERS

1984-12-01

J1016_198412

Standard

Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors

2001-03-02

J1036_200103

This SAE Standard specifies the essential interface dimensions, the installation dimensions and the operating requirements for hydraulic couplers employed to transmit hydraulic power from agricultural tractors to agricultural implements and farmstead equipment as defined in SAE J1150.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2008-04-11

J1051_200804

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2002-12-18

J1051_200212

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2020-03-30

J1051_202003

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2013-08-05

J1051_201308

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

FORCE-DEFLECTION MEASUREMENTS OF CUSHIONED COMPONENTS OF SEATS FOR OFF-ROAD WORK MACHINES

1988-12-01

J1051_198812

Standard

Air Reservoir Capacity Performance Guide—Commercial Vehicles

2002-08-23

J1609_200208

This SAE Recommended Practice establishes performance guidelines for the capacity of the air reservoir systems used on trucks, towing trucks, truck-tractors, trailers, and converter dollies, with GVWRs over 10 000 lb, designed to be used on the highway in commercial operations. NOTE—At time of publication, vehicles complying with this document may not comply with the air reservoir requirements of FMVSS 121.

Standard

AIR RESERVOIR CAPACITY PERFORMANCE GUIDE—COMMERCIAL VEHICLES

1997-07-01

J1609_199707

This SAE Recommended Practice establishes performance guidelines for the capacity of the air reservoir systems used on trucks, towing trucks, truck-tractors, trailers, and converter dollies, with GVWRs over 10 000 lb, designed to be used on the highway in commercial operations.

Standard

Air Reservoir Capacity Performance Guide—Trucks and Buses

2014-10-09

J1609_201410

This SAE Recommended Practice establishes performance guidelines of the air reservoir systems used on trucks, towing trucks, truck-tractors, trailers, and converter dollies with GVWRs over 10 000 lb designed to be used on the highway. NOTE: Compliance with this document does not guarantee compliance with the air reservoir requirements of FMVSS 121.