Refine Your Search

Date

Date

Topic

Topic

Author

Author

Technical review Cleaning Tools and equipment Metals Standard Commercial Vehicle

Search Results

Viewing 1 to 20 of 265
123Next >Last >>
Sort by relevance
Standard

Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric)
2019-05-10
CURRENT
J2295M_201905
This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.
Standard

Fasteners—Part Standard—Cap Screws, Hex Bolts, and Hex Nuts (Metric)
2006-06-21
HISTORICAL
J2295M_200606
This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.
Standard

GENERAL ENVIRONMENTAL CONSIDERATIONS FOR MARINE VEHICLES
1990-12-01
CURRENT
J1777_199012
This Hydrospace Information Report (HIR) identifies the general environmental considerations for the design, development, evaluation, and testing of advanced surface craft, submersible vehicles, and other marine craft. This HIR provides criteria on the environmental limits within which marine vehicles, related components, and associated equipment should operate satisfactorily and reliably.
Standard

Torque Ratings for Power Take-off Mounting Pads
2003-07-25
HISTORICAL
J2662_200307
This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.
Standard

MINIMUM PERFORMANCE CRITERIA FOR BRAKING SYSTEMS FOR SELF-PROPELLED, SMOOTH STEEL WHEEL, PNEUMATIC TIRED OR MULTIPLE PROJECTION STEEL WHEEL ROLLERS AND COMPACTORS
1976-04-01
HISTORICAL
J1136_197604
Minimum performance criteria for service braking systems, emergency stopping systems, and parking systems for all self-propelled vibratory and static weight smooth steel wheel, pneumatic tired or multiple projection steel wheel rollers and compactors are provided in this S.A.E. recommended practice.
Standard

USE OF TERMS YIELD STRENGTH AND YIELD POINT
1991-06-01
HISTORICAL
J450_199106
The purpose of this SAE Recommended Practice is to describe the terms yield strength and yield point. Included are definitions for both terms and recommendations for their use and application.
Standard

TON-MILE PER HOUR TEST PROCEDURE
1974-03-01
HISTORICAL
J1015_197403
The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.
Standard

TON-MILE PER HOUR TEST PROCEDURE
1977-06-01
HISTORICAL
J1015_197706
The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.
Standard

TON-MILE PER HOUR TEST PROCEDURE
1983-12-01
HISTORICAL
J1015_198312
The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.
Standard

NOMENCLATURE—ROLLERS AND COMPACTORS
1986-01-01
HISTORICAL
J1017_198601
This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. See Figures 1 to 3.)
Standard

Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines
2012-05-02
CURRENT
J1069_201205
This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2013-08-05
HISTORICAL
J1051_201308
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Snowmobile Passenger Handgrips
2006-10-06
HISTORICAL
J1062_200610
This SAE Recommended Practice is intended to give information to engineers and designers in order that access to a passenger handgrip, when used, is easily obtained and that such handgrips offer maximum safety for a person at least as large as a 95th percentile adult male during snowmobile operation.
123Next >Last >>
X