Search Results

Standard

Tire Size Differential - Articulated Wheel Loader

2019-11-20

CURRENT

J2204_201911

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER

1994-05-01

HISTORICAL

J2204_199405

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

Recreation Off-Road Vehicle Product Identification Numbering System

2012-05-07

CURRENT

ICS1000_201205

This document specifies the format, content and parameters for a product identification numbering system for off-road recreation vehicles, based on the PIN structure for earth-moving machinery in ISO 10261:2002E and is not applicable to the identification of components or attachments. This standard applies only to the off-road recreation vehicle industry and does not impose parameters for the marine, lawn and garden, silviculture, husbandry, construction or earth moving sectors.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2008-04-11

HISTORICAL

J1051_200804

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2002-12-18

HISTORICAL

J1051_200212

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2020-03-30

CURRENT

J1051_202003

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2013-08-05

HISTORICAL

J1051_201308

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

FORCE-DEFLECTION MEASUREMENTS OF CUSHIONED COMPONENTS OF SEATS FOR OFF-ROAD WORK MACHINES

1988-12-01

HISTORICAL

J1051_198812

Standard

LUBRICATION CHART—CONSTRUCTION AND INDUSTRIAL MACHINERY

1982-06-01

HISTORICAL

J753_198206

The chart is to include basic maintenance items that the manufacturer considers essential for normal operation of the machine. The chart is not intended to cover all maintenance functions and should refer the user to the manufacturers’ manuals. Attachments may be included on the chart with the standard machine or covered by separate charts. When preparing a chart, consult SAE J752b, Maintenance Interval and SAE J754a. Lubricant Types.

Standard

REPORTING CLEANLINESS LEVELS OF HYDRAULIC FLUIDS

1986-03-01

HISTORICAL

J1165_198603

This SAE Recommended Practice has been formulated to advance and endorse the use of the ISO (International Organization for Standardization) Solid Contaminant Code as the universal means for expressing the level of particulate contaminant in hydraulic fluid and for specifying acceptable limits of cleanliness. Worldwide approval was gained for this coding system because it provides a simple, unmistakable, meaningful, and consistent means of communication between suppliers and users. The code applies to all types of hydraulic (liquid) fluids used in fluid power and control systems as applied to self-propelled machines as referenced in J1116.

Standard

HYDRAULIC EXCAVATOR OPERATOR CONTROLS

1978-04-01

HISTORICAL

J1177_197804

This recommended practice covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls.

Standard

SPECIFICATION DEFINITIONS—FELLER/BUNCHER

1979-01-01

HISTORICAL

J1255_197901

This recommended practice includes the definitions of specification terms most commonly used to describe both wheeled and crawler type machines.

Standard

SPECIFICATION DEFINITIONS—FELLER/BUNCHER

1985-01-01

HISTORICAL

J1255_198501

This recommended practice includes the definitions of specification terms most commonly used to describe both wheeled and crawler type machines.

Standard

TRUCK IDENTIFICATION TERMINOLOGY

1981-12-01

HISTORICAL

J1229_198112

This SAE Recommended Practice is intended to provide uniform nomenclature and definitions for the primary levels of vehicle identification, with particular application to trucks.

Standard

TRUCK IDENTIFICATION TERMINOLOGY

1978-05-01

HISTORICAL

J1229_197805

This SAL Recommended Practice is intended to provide uniform nomenclature and definitions for the primary levels of vehicle identification, with particular application to trucks. While this specific terminology applies only to trucks, work is in progress to develop supplementary nomenclature and definitions pertaining to other commercial vehicle terms and to terms presently used interchangeably in passenger car, truck, or other commercial vehicle applications. The supplementary terms will be covered in subsequent revisions to this recommended practice.

Standard

Seat Belt Comfort, Fit, and Convenience - Truck and Bus

2014-01-24

HISTORICAL

J1834_201401

This SAE Recommended Practice provides design, test, and performance guidelines on the comfort, fit, and convenience for active restraint systems for heavy trucks and multipurpose passenger vehicle applications over 10 000 lbs gross vehicle weight rating (GVWR). The information pertains to the forward facing seating positions.

Standard

Cutting Edge - Optional Cross-Sections and Dimensions Loader Straight

2011-10-25

CURRENT

J1581_201110

The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adaptors on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.

Standard

Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus

2022-06-22

CURRENT

J2698_202206

This SAE Recommended Practice covers the design and application of primary on-board wiring distribution system harnessing for surface vehicles. This document is intended for single phase nominal 120 VAC circuits that provide power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off. The power supply comes from alternative sources such as land-based grid power, DC-AC inverters and auxiliary power generators. The circuits may also provide power to improve vehicle performance through charging batteries or operating cold-weather starting aids.

Standard

Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus

2008-01-14

HISTORICAL

J2698_200801

This SAE Recommended Practice covers the design and application of primary on-board wiring distribution system harnessing for surface vehicles. This document is intended for single phase nominal 120 VAC circuits that provide power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off. The power supply comes from alternative sources such as land-based grid power, DC-AC inverters and auxiliary power generators. The circuits may also provide power to improve vehicle performance through charging batteries or operating cold-weather starting aids.

Standard

Brake Effectiveness Marking for Brake Blocks - Truck and Bus

2019-06-06

CURRENT

J1801_201906

This SAE Recommended Practice provides the method to assign numerical values of brake effectiveness, using data from single station inertia dynamometer effectiveness tests, and to identify a uniform procedure to mark these values on the edge of brake blocks in excess of 12.7 mm (0.51 in) in thickness.