Refine Your Search

Date

Date

Topic

Topic

Author

Author

Standard Commercial Vehicle Cleaning Electrical systems Casting Automotive Tools and equipment

Search Results

Viewing 1 to 20 of 1551
123Next >Last >>
Sort by relevance
Standard

Combination Tail and Floodlamp for Industrial Equipment
2003-05-15
CURRENT
J94_200305
This SAE Standard provides performance and general design requirements and related test procedures for a combination tail and floodlamp for use on industrial wheeled equipment that may be operated on public roads.
Standard

End Drive Adapters - Balancing Error Analysis
2017-10-24
WIP
AIR6967
This SAE Aerospace Information Report is to supplement content from ARP4163 pertaining to error analysis on the use of multiple drive adapter applications, on both vertical and horizontal balance machines. This new Aerospace Information Report will serve as a practical resource that offers guidance to the Machine Operator and Process Engineer.
Standard

Design Considerations for Hush House Facilities
2018-11-26
WIP
AIR9969
to provide industry with a reference document highlighting the necessary design considerations and configuration option for an aircraft fully enclosed test facility (Hush House).
Standard

Balancing Machines - Tooling Management, Audit, and Control
2015-12-21
WIP
ARP6898
The goal of this new document is to provide criteria for managing, auditing, and controlling the use of rotating balancing tooling and associated support tools. A variety of subjects will be addressed including serialization and marking requirements, critical inspection criteria, performance tracking through tooling compensation trend analysis, handling of gage standards (rotor simulators, master blades, dummy blades, etc.), recommendations for periodic and preventive maintenance intervals, test recommendations to evaluate rotating tooling performance, requirements for traceable measures (such as torques, runouts, eccentricity, etc.), repeatability characterization, and criteria for return to service.
Standard

STANDARD FOR D.C. BRUSH MOTOR - HVAC BLOWERS
2020-11-19
CURRENT
USCAR6-1
This standard sets forth the performance and durability requirements for 12-volt, D.C. brush-type electric motors used for automobile Heating, Ventilation, and Air Conditioning (HVAC) blowers and outlines Production Validation and Continuing Conformance testing.
Standard

STANDARD FOR D.C. BRUSH MOTOR – HVAC BLOWERS
1999-02-01
HISTORICAL
USCAR6
This standard sets forth the performance and durability requirements for 12-volt, D.C. brush-type electric motors used for automobile Heating, Ventilation, and Air Conditioning (HVAC) blowers and outlines Production Validation and Continuing Conformance testing.
Standard

HIGH CURRENT TIME LAG ELECTRIC FUSES
1990-11-01
CURRENT
J1888_199011
The fuses shown in Figure 1 are for use in motor vehicles, boats, and trailers to protect electrical wiring. This SAE Standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements.
Standard

Generator Terminal Labeling
2001-04-26
CURRENT
J1416_200104
This SAE Recommended Practice recommends a common naming convention to be used to designate the terminals on automotive generators found in internal combustion engine road vehicles. The intent is to standardize the terminology in use. This document is not intended to include hybrid and/or electric vehicles.
Standard

PMODE for In-Vehicle Networks
2001-12-19
CURRENT
J2590_200112
This SAE Recommended Practice describes the power mode requirements for in-vehicle networks that conform to the Automotive Multimedia Interface Collaboration (AMI-C) specifications. These networks include, but are not limited to, the IDB-C (SAE J2366), IDB-1394, and MOST. This version of the document covers primarily IDB-C and may be revised when the PMODE requirements for the other networks are more fully developed by AMI-C.
Standard

Blade Fuses - 42 V System
2002-04-24
CURRENT
J2576_200204
This SAE Recommended Practice defines the blade fuse styles, test conditions, procedures, and performance requirements for use in vehicle electrical power systems designed to the new motor vehicle industry 42 V architecture. The intent of this document is to provide a framework for 58 V Blade Fuse characteristics, serving the motor vehicle industry to establish standardization with respect to electrical performance and mechanical requirements. This standardization shall lend itself to safe application practices; e.g., prevention of 32 V devices utilized inappropriately in 42 V electrical systems. Both the performance and mechanical requirements expressed herein are for the advancement of mobility engineering and the development of safe application practices. They are not intended for the establishment of design exclusions, patent rights, or franchising that engenders restraint of trade.
Standard

Discriminating Back-Up Alarm System Standard
1999-06-01
CURRENT
J1741_199906
This SAE Standard describes methods for evaluating the performance of the systems detection device, the minimum detection areas behind the machine, the visual and audible information presented to the operator and ground personnel, and the systems fault detection requirements. Also included are operator system function tests and maintenance procedures.
Standard

Mercury Switch Removal Process
1998-05-01
CURRENT
J2456_199805
Mercury capsules have been used in the automotive industry in various switching applications. The basic design and performance characteristics of mercury switches (or capsules) make these components particularly suited to underhood light and trunk light applications. The processes described in this SAE Standard deal with the location, removal, storage, and recycling of mercury switches and capsules associated with these underhood and trunk light applications.
Standard

ELECTROPLATE REQUIREMENTS FOR DECORATIVE CHROMIUM DEPOSITS ON ZINC BASE MATERIALS USED FOR EXTERIOR ORNAMENTATION
1991-06-01
HISTORICAL
J1837_199106
This SAE Standard covers the physical and performance requirements for electrodeposited copper, nickel, and chromium deposits on exterior ornamentation fabricated from die cast zinc alloys (SAE J468 alloys 903 and 925), and wrought zinc strip (ASTM B 69). This type of coating is designed to provide a high degree of corrosion resistance for automotive, truck, marine, and farm usage where a bright, decorative finish is desired.
Standard

Electroplate Requirements for Decorative Chromium Deposits on Zinc Base Materials Used for Exterior Ornamentation
2017-12-20
CURRENT
J1837_201712
This SAE Standard covers the physical and performance requirements for electrodeposited copper, nickel, and chromium deposits on exterior ornamentation fabricated from die cast zinc alloys (SAE J468 alloys 903 and 925), and wrought zinc strip (ASTM B 69). This type of coating is designed to provide a high degree of corrosion resistance for automotive, truck, marine, and farm usage where a bright, decorative finish is desired.
Standard

SAE J2450 Supplemental Training Document
2019-10-31
CURRENT
J2450/1_201910
This supplement, which is a living document, is meant to provide both clients and translation suppliers with some suggestions for integrating SAE J2450 into their business practices. It is intended for the use of clients, trainers who wish to develop new evaluators, and those who wish to self-train.
Standard

SAE J2450 Supplemental Training Document
2008-05-13
HISTORICAL
J2450/1_200805
This supplement, which is a living document, is meant to provide both clients and translation suppliers with some suggestions for integrating SAE J2450 into their business practices. It is intended for the use of clients, trainers who wish to develop new evaluators, and those who wish to self-train.
123Next >Last >>
X