Search Results

Rollover crashes are complex events that generate motions in all six degrees of freedom (6DOF). Directly quantifying the angular rotations from video can be difficult and vehicle orientation as a function of time is often not reported for staged rollover crashes. Our goal was to evaluate the ability of using a match-moving technique and consumer-grade video cameras to quantify the roll, pitch and yaw angles and angular velocities of a rollover crash. We staged a steer-induced rollover of an SUV at 106 km/h. The vehicle was fitted with tri-axial accelerometers and angular rate sensors, and five consumer-grade video cameras (2 on tripods, 2 on drones, 1 handheld, ~30 fps) captured the event. Roll, pitch and yaw angles were determined from the video using specialized software.

The ability to accurately calculate a snowmobile’s speed based on measured track marks in the snow is important when assessing a snowmobile accident. The characteristics and length of visible snowmobile track marks were documented for 41 locked-track braking tests and 38 rolldown tests using four modern snowmobiles on a groomed/packed snow surface. The documented track mark lengths were used to quantify the uncertainty associated with using track mark length to estimate initial speed. Regression models were developed for both data sets. The regression model of the locked-track tests revealed that using an average deceleration of 0.36g over the length of the locked track mark provides a good estimate of the best-fit line through the data, with the upper and lower 95th percentile prediction interval bounds best represented by using deceleration rates of 0.23g and 0.52g respectively.

In low-speed collisions, motor vehicles can lose a significant fraction of their initial kinetic energy without plastic deformation or damping elements in their bumper assemblies. Five vehicles were subjected to multiple, non-damaging barrier and vehicle-to-vehicle impacts. Position, velocity, acceleration and force data were recorded for all collisions. Modeling vehicles as non-rigid two degree of freedom systems accurately predicted velocity and restitution responses for five vehicles in barrier and vehicle-to-vehicle impacts.

There are limited scientific data available on the acceleration and braking performance of modern snowmobiles. In this study we investigated the acceleration and deceleration characteristics of four modern snowmobiles of varying engine size (500 to 1000 cc) and style (2-stroke and 4-stroke) on groomed/packed snow conditions. The acceleration tests were performed at quarter, half and full throttle. The deceleration tests were performed using full braking with locked tracks and rolldown with power both on and off. Target test speeds ranged from 20 to 60 km/h. Snow condition parameters were measured throughout the tests. The results of the acceleration tests showed that at higher speeds, higher horsepower rating generally corresponds to higher acceleration rates, with a maximum observed average acceleration of 0.70g.

Vehicle rollovers are complex events that can be difficult to reconstruct. The goal of this study was to explore whether different vehicle trip models could identify when during the trip phase a vehicle possesses the dynamic conditions needed to rollover. We used three sport utility vehicles (SUVs) with either absent or disabled electronic stability control to conduct six tests involving a steer-induced control loss on a large flat concrete surface. Vehicle kinematics were measured using a GPS speed sensor, tri-axial accelerometers, tri-axial angular rate sensors, and both drone- and land-based video cameras. Four vehicle trip metrics were derived and evaluated using the vehicle dynamics between steer onset and the end of the trip phase. During three tests, one or more of the vehicle’s tires lifted off the ground but the vehicle did not roll. In the other three tests, the vehicle rolled.

Newer Toyota vehicles store information about more than 50 parameters for 5 s before and after non-collision events in the Vehicle Control History (VCH) records. The goals of this study were to assess the accuracy of VCH data acquired during Autonomous Emergency Braking (AEB) events and to investigate the effects of speed, acceleration, and system settings on AEB performance. A 2017 Toyota Corolla with Safety Sense P Pre-Collision System (PCS) was driven in a straight line towards a car-like target at different combinations of four speeds (20, 25, 30, and 40 km/h; or 12, 15, 19, and 25 mph) and three accelerator pedal positions (constant 30%, 40%, and 50% accelerator opening ratios) until the AEB system activated. The vehicle speed, vehicle acceleration, radar target closing speed, and radar target distance recorded in the VCH were compared to a reference 5th wheel. We found that errors in the VCH distance, speed, and acceleration data varied with the test conditions.

Modern vehicles record dynamic data from a number of on-board sensors for events that could precede a crash. These data can be used to reconstruct the behavior of a vehicle, although the accuracy of these reconstructions has not yet been quantified. Here, we evaluated various methods of reconstructing the vehicle kinematics of a 2017 and a 2018 Toyota Corolla based on Vehicle Control History (VCH) data from overlapping events generated by the pre-collision system (PCS), sudden braking (SB) and anti-lock brake (ABS) activation. The vehicles were driven towards a stationary target at 32-64 km/h (20-40 mph) and then after the pre-collision alarm sounded the vehicle was steered sharply right or left and braked rapidly to rest. VCH data for PCS event were recorded at 2 Hz and for the sudden braking and ABS activation events at 6.7 Hz.

Bicycle computers record and store global position data that can be useful for forensic investigations. The goal of this study was to estimate the absolute error of the latitude and longitude positions recorded by a common bicycle computer over a wide range of riding conditions. We installed three Garmin Edge 530 computers on the handlebars of a bicycle and acquired 9 hours of static data and 96 hours (2214 km) of dynamic data using three different navigation modes (GPS, GPS+GLONASS, and GPS+Galileo satellite systems) and two geographic locations (Vancouver, BC, Canada and Orange County, CA, USA). We used the principle of error propagation to calculate the absolute error of this device from the relative errors between the three pairs of computers. During the static tests, we found 16 m to 108 m of drift during the first 4 min and 1.4 m to 5.0 m of drift during a subsequent 8 min period. During the dynamic tests, we found a 95th percentile absolute error for this device of ±8.04 m.

Anti-lock brake systems (ABS) produce high levels of vehicle deceleration under emergency braking conditions by modulating tire slip. Currently there are limited data available to quantify the mean, variance, and distribution of vehicle deceleration levels for modern ABS-equipped vehicles. We conducted braking tests using twenty (20) late-model vehicles on contiguous dry asphalt and concrete road surfaces. All vehicles were equipped with a 5th wheel sampled at 200 Hz, from which vehicle speed and deceleration as a function of time were calculated. Eighteen (18) tests were conducted for each vehicle and all tests were conducted from a targeted initial speed of 65 km/h (40 mph). Overall, we found that late-model ABS-equipped vehicles can decelerate at average levels that vary from about 0.871g to 1.081g across both surfaces, and that deceleration levels were on average about 0.042g higher on asphalt than on concrete.

The goal of this study was to use naturalistic driving data to characterize the longitudinal and lateral accelerations of vehicles making a left turn from a stop at signalized intersections. Left turn maneuvers at 15 intersections were extracted from the Second Strategic Highway Research Program (SHRP2) database. A subset of 420 traversals for lead vehicles that were initially stopped and negotiated their left turns unimpeded by oncoming traffic was used for the analysis. For each traversal, we extracted information regarding the driver’s sex and age, the vehicle type, the vehicle’s longitudinal and lateral acceleration, and on-board forward-facing video. From the video, we further extracted information about whether the road was dry/wet and if it was day/night, and from aerial photographs of the intersections we extracted the radius of each left turn path through the intersection.

The goal of this study was to use naturalistic driving data to characterize the motion of vehicles making right turns at signalized intersections. Right-turn maneuvers from 13 intersections were extracted from the Second Strategic Highway Research Program (SHRP2) database and categorized based on whether or not the vehicle came to a stop prior to making its turn. Out of the vehicles that did stop, those that were the first and second in line at the intersection were isolated. This resulted in 186 stopped first-in-line turns, 91 stopped second-in-line turns, and 353 no stop turns. Independent variables regarding the maneuver, including driver’s sex and age, vehicle type, speed, and longitudinal and lateral acceleration were extracted. The on-board video was reviewed to categorize the road as dry/wet and if it was day/night. Aerial photographs of the intersections were obtained, and the inner radius of the curve was measured using the curb as a reference.