Search Results

Biodiesel blends are promising alternatives to diesel fuel, but, reduced quantitative information is available on the impact of biodiesel on engine systems behaviour, durability and economical aspects in fleet cost management. A representative sample of urban buses fuelled with B50 was compared with the same type of vehicle fuelled with conventional petroleum fuel. The objective was to assess the effects of B50 upon important parameters such as: fuel consumption, power loss and drivability; the effects on the fuel system and engine oil and the implications regarding the maintenance programme. These implications could be very relevant upon a fleet manager's decision to select biodiesel as an alternative fuel. The results obtained show that there was no difference in the serviceability of the buses fuelled with B50 compared with those fuelled with petroleum diesel fuel, and additionally, no change in the maintenance programme was required for this type of B50 fuel.

In this paper the effect of the engine load and the EGR (exhaust gas recirculation) rate on the combustion process and the pollutant emissions when using RME (rapeseed methyl-ester) is investigated. For this purpose a parametric study in a single-cylinder HSDI (high speed direct injection) engine in a wide range of operating conditions (thus trying to maximize the generality of the results) has been carried out. All the output parameters are compared with the corresponding ones for a reference diesel fuel at equivalent engine performances and operating conditions. To perform a rigorous comparison, a specific methodology has been designed based on the comparison at equivalent engine load and oxygen mass fraction in the intake manifold, so as to remove the effect of the fuel properties (derived from the different oxygen content, mainly) on the engine performances.

Pure biodiesel is non-toxic, biodegradable and greenhouse gas neutral alternative fuel with potential successful future but reduced quantitative information is available about the impact of biodiesel on engine durability and long period usage effects. In this study, a commercial light duty Diesel engine installed on an engine test bench has been operated fuelled with pure biodiesel (B100 referred to the EN-14214 standard) during a period test of 300 hours in order to analyze engine performance and components behavior. A engine characterization has been completed using conventional diesel fuel (EN 590). Then, following a specific defined operation cycle and fuelled with pure biodiesel, a study over different engine components such as: engine oil, fuel filters, Diesel Particulate Filter (DPF), so on, has been done in order to obtain possible negative effects and modifications required over maintenance policies applied to them.

This paper reports the results obtained in the ECOBUS Project. This project has been supported by the LIFE Program, one of the spearheads of European Union's environmental policy. The main aim for this project was to convert used cooking oil into biodiesel and then use this biodiesel in urban buses, contributing to reducing in one hand waste cooking oil that can create problems in the drainage city system and water contamination and on the other hand reducing engine polluting emissions. Departamento de Máquinas y Motores Térmicos (DMMT) facilities at the Universidad Politécnica de Valencia (Spain) were used to conduct detailed performance and emission measurements in a Diesel engine similar to those used by the urban transport operator in Valencia (Empresa Municipal de Transporte, EMT). The test engines were operated with conventional Diesel fuel (EN 590) and three different biodiesel blends: 30, 50 and 70%, using the pure biodiesel obtained from used cooking oil (EN 14214).