Search Results

Natural gas is an attractive fuel for vehicles because it is a relatively clean-burning fuel compared with gasoline. Moreover, methane can be stored in the physically adsorbed state [at a pressure of 3.5 MPa (500 psi)] at energy densities comparable to methane compressed at 24.8 MPa (3600 psi). Here we report the development of natural gas storage monoliths [1]. The monolith manufacture and activation methods are reported along with pore structure characterization data. The storage capacities of these monoliths are measured gravimetrically at a pressure of 3.5 MPa (500 psi) and ambient temperature, and storage capacities of >150 V/V have been demonstrated and are reported.

Fuel injection into the negative valve overlap (NVO) period is a common method for controlling combustion phasing in homogeneous charge compression ignition (HCCI) and other forms of advanced combustion. When fuel is injected into O2-deficient NVO conditions, a portion of the fuel can be converted to products containing significant levels of H2 and CO. Additionally, other short chain hydrocarbons are produced by means of thermal cracking, water-gas shift, and partial oxidation reactions. The present study experimentally investigates the fuel reforming chemistry that occurs during NVO. To this end, two very different experimental facilities are utilized and their results are compared. One facility is located at Oak Ridge National Laboratory, which uses a custom research engine cycle developed to isolate the NVO event from main combustion, allowing a steady stream of NVO reformate to be exhausted from the engine and chemically analyzed.

Temperature measurement of internal components and surfaces can enhance understanding of thermal processes that occur during engine operation. Such measurements have typically been made with thermocouples, temperature sensitive paints or plugs, or infrared emission methods. Phosphor thermometry, a non-contact measurement technique, is an alternative that can be applied when more traditional methods are not feasible or are too costly. Recent efforts described in this paper have used phosphor thermometry to measure steady state piston crown temperature in a single cylinder engine. Additional testing with this technique included monitoring intake valve temperature in a multicylinder engine under cold start conditions. Packaging of the optical hardware necessary for this technique was substantially refined during these tests for use in modern engine geometries.