Search Results

The biomechanical response and injury tolerance of the shoulder in lateral impacts is not well understood. These data are needed to better understand human injury tolerance, validate finite element models and develop biofidelic shoulders in side impact dummies. Seventeen side impact sled tests were performed with unembalmed human cadavers. Data analyzed for this study include T1-Y acceleration, shoulder and thoracic load plate forces, upper sternum x and y accelerations, and struck side acromion x, y and z accelerations. One dimensional deflection at the shoulder level was determined from high-speed film by measuring the distance between a target on T1 and the impacted wall. Force-time response corridors were obtained for tests with 9 m/s pelvic offset, 10.5 m/s pelvic offset, 9 m/s unpadded flat wall, 6.7 m/s unpadded flat wall, 9 m/s soft padding and 9 m/s stiff padding. Maximum shoulder plate forces in unpadded 9 m/s tests (5.5 kN) were larger than in 6.7 m/s tests (3.3 kN).

Thirty-three fresh human cadaver shoulders were harvested and bone-ligament-bone specimens of acromioclavicular joint, coracoclavicular joint and sternoclavicular joint were obtained. A test fixture and clamps specifically designed for this ligament study and a high-speed Instron machine were used. One quasi-static rate (nominally 0.1 %/sec) and two high rates (nominally, high rate 1 = 40,000 %/sec and high rate 2 = 15,000 %/sec) were used in this study. In the acromioclavicular joint tests, ligament failure was the most common failure mode. Bone fractures occurred most often at the clavicle rather than acromion. In the coracoclavicular joint tests, the majority of specimens failed at the ligament and bone fractures occurred at the coracoid. In the sternoclavicular joint tests, the specimen failed at the bone in most cases. In the acromioclavicular joint and coracoclavicular joint tests, high rate 2 tests and quasi-static tests had more bone fracture cases than high rate 1 tests.

To date, several lateral impact studies (Bolte et al., 2000, 2003, Marth, 2002 and Compigne et al., 2004) have been performed on the shoulder to determine the response characteristics and injury threshold of the shoulder complex. Our understanding of the biomechanical response and injury tolerance of the shoulder would be improved if the results of these tests were combined. From a larger data base shoulder injury tolerance criteria can be developed as well as corridors for side impact dummies. Data from the study by Marth (2002, 12 tests) was combined with data from the previous studies. Twenty-two low speed tests (4.5 ± 0.7 m/s) and 9 high speed tests (6.7 ± 0.7 m/s) were selected from the combined data for developing corridors. Shoulder force, deflection and T1y acceleration corridors were developed using a minimization of cumulative variance technique.