Refine Your Search

Search Results

Viewing 1 to 9 of 9
Technical Paper

A Hybrid Combustion Control Strategy for Heavy Duty Diesel Engines Based on the Technologies of Multi-Pulse Injections, Variable Boost Pressure and Retarded Intake Valve Closing Timing

2011-04-12
2011-01-1382
Combustion control strategy for high efficiency and low emissions in a heavy duty (H D) diesel engine was investigated experimentally in a single cylinder test engine with a common rail fuel system, EGR (Exhaust Gas Recirculation) system, boost system and retarded intake valve closing timing actuator. For the operation loads of IMEPg (Gross Indicated Mean Effective Pressure) less than 1.1 MPa the low temperature combustion (LTC) with high rate of EGR was applied. The fuel injection modes of either single injection or multi-pulse injections, boost pressure and retarded intake valve closing timing (RIVCT) were also coupled with the engine operation condition loads for high efficiency and low emissions. A higher boost pressure played an important role in improving fuel efficiency and obtaining ultra-low soot and NOx emissions.
Technical Paper

A New Reduced Chemical Kinetic Model for Autoignition and Oxidation of Lean n-heptane/Air Mixtures in HCCI Engines

2005-04-11
2005-01-0118
The paper has presented a new reduced chemical kinetic model for the Homogeneous Charge Compression Ignition (HCCI) combustion of n-heptane in an engine, which contains 41 species and 63 reactions. The new model includes three sub-models: the first is the low-temperature reaction sub-model, which is established by determining particular aldehydes and small hydrocarbons in the model developed by Li et al. The second is the sub-model for large molecules decomposing directly into small molecules that is developed for linking the low-temperature reaction with high-temperature reaction. The third is used for high-temperature reaction, which is derived by several modifications to the model developed by Griffiths et al., eliminating several reactions, adding two oxidization reactions related to CO and CH3O.
Technical Paper

A Promising High Efficiency RM-HCCI Combustion Proposed by Detail Kinetics Analysis of Exergy Losses

2015-04-14
2015-01-1751
To explore the exergy loss of engine combustion process, entropy generations were numerically analyzed through detailed chemical kinetics. It revealed that the reformed fuel with simpler molecular tended to produce lower combustion irreversibility. Furthermore, a promising high efficiency RM- HCCI (Reformed molecule HCCI) combustion principle was proposed. In a RM-HCCI engine, hydrocarbon fuels were reformed into small molecule fuels under high temperature and low/no oxygen atmosphere before injection into the cylinder when the exhaust gas enthalpy to a certain extent was recovered, further improving the engine efficiency. The second law efficiency (η2nd) of a RM-HCCI combustion with a CR of 10 can be increased from 36.78% to 45.47% by coordination of multiple control parameters, and to 67.79% by raising CR from 10 to 100.
Technical Paper

A Study On the Determination of the Amount of Pilot Injection and Rich and Lean Boundaries of the Pre-Mixed CNG/Air Mixture for a CNG/Diesel Dual-Fuel Engine

2003-03-03
2003-01-0765
A sequential port injection, lean-burn, fully electronically-controlled compressed natural gas (CNG)/Diesel dual-fuel engine has been developed based on a turbo-charged and inter-cooled direct injection (D.I.) diesel engine. During the optimization of engine overall performance, the effects of pilot diesel and pre-mixed CNG/air mixture equivalence ratio on emissions (CO, HC, NOx, soot), knocking, misfire and fuel economy are studied. The rich and lean boundaries of the pre-mixed CNG/air mixture versus engine load are also provided, considering the acceptable values of NOx and THC emissions, respectively. It is interesting to find that there is a critical amount of pilot diesel for each load and speed point, which proved to be the optimum amount of pilot fuel. Any decrease in the amount of pilot diesel from this optimum amount results in an increase of NOx emissions, because the pre-mixed CNG/air mixture must be made richer, otherwise THC emissions would increase.
Technical Paper

Enhancement of Near Wall Mixing of an Impinging Jet by Means of a Bump on the Wall

1997-05-01
971616
It is found that a thin and rich mixture layer on a wall is formed after impingement of a gas jet of fuel on the wall. The measured thickness of the mixture layer is about 2 mm. and its dispersion rate after the end of injection is much lower, compared to that of a space gas jet. This phenomenon in a small D.I. diesel engine is known as “wall wetting” or “wall fuel accumulation” which has an important influence on engine fuel consumption and emissions. This paper presents a technique for enhancing the near wall mixing of an impinging jet by means of a bump on the wall. The development of a wall jet formed after an impingement of a gas jet has been investigated by simultaneously measuring the near wall velocity and concentration distribution. It has been found that a wall jet is stripped off the wall and ejected as a secondary jet when the wall jet encounters a bump of the wall.
Technical Paper

Numerical Study of Ignition Core Formation and the Effects on Combustion in a Pilot Ignited NG Engine

2017-10-08
2017-01-2273
A numerical simulation was performed to investigate the pilot ignited natural gas combustion process in a direct injection natural gas engine. Various mixture distribution characteristics were compared in terms of the evolution of mixture equivalent ratio distributions and mixture concentration stratifications around top dead center (TDC). Based on above, the pilot injections were specially designed to investigate ignition core formation and its effects on natural gas combustion process. The result shows that pilot ignition sites have great impacts on pilot fuel ignition process and natural gas combustion process. The pilot ignition site on the region with rich NG/Air mixture is disadvantageous to the pilot fuel ignition due to a lack of oxygen, which is not beneficial to ignition core formation.
Technical Paper

Numerical Study on a High Efficiency Gasoline Reformed Molecule HCCI Combustion Using Exergy Analysis

2017-03-28
2017-01-0735
In this study, the characteristics and the advantages on engine performance of the reformed molecule HCCI (RM-HCCI) combustion fueled with gasoline were investigated by exergy analysis. The processes of fuel reforming and the closed portion of the engine cycle were simulated integrated with chemical kinetics mechanism at varied compression ratio (CR) and constant speed conditions. Results showed the fuel reforming under high temperature and oxygen-free condition by the exhaust heat recovery and electric heating assistance could drive gasoline to transform to the small-molecule gas fuels, meanwhile enhanced the chemical exergy of the fuel. The reformed fuel contributed to extending ignition delay, so less dilution required in RM-HCCI engine when expanding high load compared with gasoline HCCI engine. Thus, RM-HCCI engine could achieve higher load than gasoline HCCI engine, with the improvements by 12%, 26%, and 31% at CR17, CR19, and CR21, respectively.
Technical Paper

PAIRCUI- A New Pressure Accumulative, Injection Rate Controllable Unit Injector for Diesel Engine Fuel Systems

1997-05-01
971680
A pressure accumulative injection rate controllable unit injector-PAIRCUI is proposed and developed. This unit injector is powered by fuel pressure accumulation controlled by an electronic control unit and its injection rate is shaped by inner valves of the injector. Inherent advantages of an accumulator type unit injector have been carried out in this new design, including sructural simplicity, totally flexible injection timing, medium common rail pressure, tolerable pump size and flow requirement. A number of decisive features have also been realized that are significant for high efficiency and low emissions of engine combustion, including higher mean effective injection pressure(MEIP), pilot injection capability and rapid end of injection. The injection pressure is independent of engine speed, but regulated upon engine load. These characteristics are beneficial in improving engine performance and fuel consumption.
Journal Article

Quantitative Study of Concentration and Temperature of a Diesel Spray by Using Planar Laser Induced Exciplex Fluorescence Technique

2010-04-12
2010-01-0878
The Lambert-Beer's coefficient K was measured in a wide range of temperatures (400-1200K) and pressures (2-8.2 MPa) in this paper. Based on the measured MAP of K and principle of energy conservation in the sprays mass and transfer, a quantitative presentation of equivalence ratio and temperature in vapor phase sprays at diesel engine like conditions was put forward. The experimental range of temperatures was 800-1100K and 20-100 kg/m₃ for density. It was found that the maximum equivalence ratio of vapor phase spray remained fairly constant at about 3.0 and the maximum equivalence ratio appearance earlier as the ambient density increased, while the ambient temperature in the constant volume vessel was set at 800K. The maximum equivalence ratio of vapor phase spray increased from about 3.0 to about 3.7 as ambient temperature increased from 800 to 1100K.
X