Search Results

As the automotive industry vies to meet progressively more stringent global CO2 regulations in a cost-effective manner, electrified drive system cost and losses must be reduced. To this end, a parametric Drive Unit (DU) mechanical-loss model was developed to aid in the design and development of electrified propulsion systems, where the total propulsion system cost and DU losses can be directly linked (e.g., Hybrid Electric Vehicle (HEV) motor/inverter/engine content, or Battery Electric Vehicle (BEV) battery size). Many DUs for electrified propulsion systems are relatively “simple” drive systems, consisting of gears, bearings, shafts, lip seals, and an electric motor(s), but without clutches, high-pressure lube systems, or chains/belts as found in conventional automatic transmissions. The DU loss model described in this paper studies these simple DUs, with the mechanical losses dissected into 10 loss components.

Due to environmental and legislative concerns, less polluting and more efficient vehicle powertrain systems must be developed. A first step is a simple, low cost system such as the presented Engine Stop-Start (ESS) system. A 1.9 liter four-cylinder spark-ignition engine with a four-speed automatic transmission was modified to enable fuel off-on transitions during decelerations and stops. Additional hardware includes a 7 kW electric motor-generator, a power electronics module with an inverter and a DCDC converter, a 36 Volt nominal battery system, and minor modifications to the transmission. A control scheme was developed which takes advantage of the system's fuel saving potential while minimally affecting driveability. Tests have shown EPA City fuel economy gains of approximately 12-14 percent while maintaining the same emissions classification. The EPA Highway fuel economy was increased by approximately 1 percent.