Search Results

Vehicle manufacturers developed two mixture formation concepts for the first generation of gasoline direct-injection (GDI) engines. Both the wall-guided concept with reverse tumble air motion or swirl air motion and the air-guided concept with tumble air motion have the fuel injector located at the side of the combustion chamber between the two intake ports. This paper proposes a new GDI concept. It has the fuel injector located at almost the center of the combustion chamber and with the spark plug positioned nearby. An oval bowl is provided in the piston crown. The fuel spray is injected at high fuel pressures of up to 100 MPa. The spray creates strong air motion in the combustion chamber and reaches the piston bowl. The wall of the piston bowl changes the direction of the spray and air motion, producing an upward flow. The spray and air flow rise and reach the spark plug.

A gasoline-fueled homogeneous charge compression ignition (HCCI) engine with both direct fuel injection and negative valve overlap for exhaust gas retention was examined. The fuel was injected directly into the residual in-cylinder gas during the negative valve overlap interval for the purpose of reforming it by using the high temperature resulting from exhaust gas recompression. With this injection strategy, the HCCI combustion region was expanded dramatically without any increase in NOx emissions which were seen in the case of compression stroke injection. Injection timing during the negative valve overlap was found to be an important parameter that affects the HCCI region width. The injection timing also had the most suitable value in each engine load for the best fuel consumption. From this result, A new injection strategy in which only a portion of the fuel was injected during the negative valve overlap interval, while the rest of fuel was injected in intake stroke, was proposed.