Search Results

Porous honeycombs filters have been widely used for diesel particulates filtration in passenger cars applications. In all current DPF applications, filter lifetime and design are dictated by the need to store non combustible ash generated at the exhaust. Therefore, improving the ash storage capacity of a filter appears as a major step towards the development of maintenance free DPF systems. This paper describes a new filter design that was developed to optimize ash storage volume. Numerical simulations and roller bench tests have been performed in order to compare the performances of this new filter to commercial honeycomb filters.

Recrystallized Silicon carbide (R-SiC) honeycombs have been widely used over the last couple of years as filtration media for diesel particulates filtration in passenger cars applications. Although such filters are very reliable thanks to SiC good properties and smart designs, existing devices can still be improved. This paper describes several new features developed for R-SiC honeycomb filters in order to increase their durability and reduce their cost. Durability improvements can be obtained through the optimization of different filter properties such as thermo-mechanical resistance and thermal diffusivity. Specific tests have been performed in order to optimize new R-SiC filters.

This paper presents energy management strategies for a new hybrid pneumatic engine concept, which is specific by its configuration: It is not a vehicle but only an engine itself which is hybridized. This arrangement could provide as much as 30% of fuel saving depending on the driving cycle. Therefore different energy management strategies are proposed and compared in this paper. The first of them is called Causal Strategy and implements a rule-based control technique. A second strategy called Constant Penalty Coefficient is based on minimization of equivalent consumption, where the use of each energy source is formulated in a comparative unit. The balance between consumption of different energy source (chemical or pneumatic) is reached by introduction of an equivalence factor. The third strategy is called Variable Penalty Coefficient, where the equivalence factor is consider as variable within the amount of pneumatic energy stored in the air-tank.

Model-based tuning is a way followed by car manufacturers to reduce development costs. In this context, a new methodology has been developed in order to adapt a tur-bocharged diesel engine in the case of non-standard external conditions. Indeed, variable geometry turbine and fuel injection command laws are developed for standard conditions (20°C, altitude=0m). Turbocharger and fuel injection actuators pre-positioning maps should be adjusted regarding the inducted air mass density (influenced by the external temperature and pressure), in order to meet thermal, mechanical and pollutant emissions constraints. In order to reduce the use of climatic tests bench and extreme conditions tests in foreign countries, a model of a turbocharged diesel engine coupled to an optimization loop has been used to take into account the effect of non-standard external conditions on pre-positioning maps.