Search Results

A new combustion concept, called spark-ignited compression ignition (SI-CI) combustion, is proposed for expanding the operation range of homogeneous charge compression ignition (HCCI) combustion. The authors previously showed that raising the mixture temperature before compression so as to induce auto-ignition near top dead center reduces the quantity of trapped gas, resulting in a lower maximum indicated mean effective pressure (IMEP). With the newly proposed combustion concept, auto-ignition of a homogeneous lean mixture is accomplished by the additional compression resulting from SI combustion of a small quantity of stratified mixture instead of raising the intake air temperature. This SI-CI combustion process reduced the necessary increase in intake air temperature compared with conventional HCCI combustion. A higher maximum IMEP was achieved with SI-CI combustion than with conventional HCCI combustion, as was planned.

Since the stable operating region of a gasoline-fueled HCCI engine is limited to the part load condition, a mode change between SI and HCCI combustion is required, which poses an issue due to the difference in combustion characteristics. This report focuses on the combustion characteristics in the transitional range. The combustion mode in the transitional range is investigated by varying the internal EGR rate, intake air pressure, and spark advance timing in steady-state experiments. In this parametric study, stable SI-CI combustion is observed. This indicates that the combustion mode transition is possible without misfiring or knocking, regardless of the speed of variable valve mechanism which includes VVA, VVEL, VTEC, VVL and so on, though the response of intake air pressure still remains as a subject to be examined in the actual application.

To allow the HCCI vehicles to enter the market in the future, it is important to investigate the combustion deviations and operational range differences between the same research octane number fuels. In this paper, eighteen kinds of two hydrocarbon blended fuels, which were composed of n-heptane and another hydrocarbon, such as iso-octane, diisobutylene, 4-methyl-1-pentene, toluene or cyclopentane, were evaluated. Those fuels were blended to have the same research octane numbers of 75, 80, 85 and 90 by changing the blending volume ratio of n-heptane and counterpart hydrocarbon. Intake air was supercharged to 155 kPa abs and its temperature was kept at 58 °C. The HCCI engine was operated at 1000 rpm. Neither hot EGR, nor any other combustion stratification system was utilized in order to investigate the purely hydrocarbon effects on HCCI combustion.