Search Results

An acoustic one-dimensional compressor model has been developed. This model is based on compressor map information and it is able to predict how the pressure waves are transmitted and reflected by the compressor. This is later on necessary to predict radiated noise at the intake orifice. The fluid-dynamic behavior of the compressor has been reproduced by simplifying the real geometry in zero-dimensional and one-dimensional elements with acoustic purposes. These elements are responsible for attenuating or reflecting the pressure pulses generated by the engine. In order to compensate the effect of these elements in the mean flow variables, the model uses a corrected compressor map. Despite of the fact that the compressor model was developed originally as a part of the OpenWAM™ software, it can be exported to other commercial wave action models. An example is provided of exporting the described model to GT-Power™.

In a context of increasing emission regulations, turbocharged gasoline engines are increasingly present in the automotive industry. In particular, the twin-entry and double-entry radial inflow turbines are widespread used technologies to avoid interferences between exhaust process of consecutive firing order cylinders. In this study, a passenger car twin-entry type turbine has been tested under highly pulsating flow conditions by means of a specifically built gas stand, trying to perform pulses with similar features as the ones that can be found in a real reciprocating engine. For this purpose, the turbine has been instrumented with multiple pressure, temperature and mass flow sensors, using a uniquely designed rotating valve for generating the pulses. The test bench setup is flexible enough to perform pulses in both inlet branches separately as well as to use hot or ambient conditions with minimal changes in the installation.

This paper reports on the global analysis of the EGR circuit in a HSDI diesel engine and its influence on engine transient operation. To achieve this, the employed methodology was a combination of experimental tests and theoretical calculations. The experimental work was performed in a fully instrumented engine test bench equipped with an electronically controlled brake able to simulate the European driving cycle (ECE test cycle). Beside this, the theoretical calculations consisted of simulating the accelerations performed in the ECE test cycle by means of a 1-D gas dynamic code that has been adjusted according to the experimental results. This code takes into account the transport of different species through the engine ducts and has been updated related to the transient feature in order to accept different drag force configurations, road gradients and vehicle specifications.

The increasingly restrictive legislation on pollutant emissions is involving new homologation procedures driven to be representative of real driving emissions. This context demands an update of the modelling tools leading to an accurate assessment of the engine and aftertreatment systems performance at the same time as these complex systems are understood as a single element. In addition, virtual engine models must retain the accuracy while reducing the computational effort to get closer to real-time computation. It makes them useful for pre-design and calibration but also potentially applicable to on-board diagnostics purposes. This paper responds to these requirements presenting a lumped modelling approach for the simulation of aftertreatment systems.