Search Results

Pedestrians and cyclists are the most unprotected road users and their injury risk in case of accidents is significantly higher than for other road users. The understanding of the influence and sensitivity between important variables describing a pedestrian crash is key for the development of more efficient and reliable safety systems. This paper reflects the related work carried out within the AsPeCSS project. The results summarized out of virtual and physical tests provide valuable information for further development. 1168 virtual and 120 physical tests were carried out with adult and child pedestrian headform as well as upper and lower legform impactors representatives of 4 different vehicle front geometries in a wide range of impact speeds, angles and locations. This test matrix was based on previous work carried out within the AsPeCSS project.

For many years, all Side Impact Crash Test studies have been put into practice considering the results achieved from the EuroSID II dummy. The introduction of the WorldSID to the crash test world has become a milestone not only for vehicle manufacturers but also for crash test laboratories. Because of this, it is necessary to study the differences between the EuroSID II and the new dummy to be used from now on in Euro NCAP Side Impact Tests, the WorldSID. To do this, an in-depth analysis of the structure of both dummies was carried out so as to obtain a clearer view of what can be expected of the values achieved from testing them. Furthermore, a series of impact tests were defined, based on side impact virtual tests, making a special effort to obtain crash test results from both dummies in very similar configurations.

In recent years, platooning emerged as a realistic configuration for semi-autonomous driving. In the SARTRE project, simulation and physical tests were performed to validate the platooning system not only in testing facilities but also in conventional highways. Five vehicles were adapted with autonomous driving systems to have platooning functionalities, enabling to perform platoon tests and assess the feasibility, safety and benefits. Although the tested system was in a prototype, it demonstrated sturdiness and good functionality, allowing performing conventional road tests. First of all the fuel consumption decreased up to 16% in some configurations and different gaps between the vehicles were tested in order to establish the most suitable for platooning in terms of safety and economy. Additionally, the platooning technology enables a new level of safety in highways. Around 85% of the accident causation is the human factor.

The increasing variety of test configurations and requirements has leaded to carry out activities of greater complexity. These advanced crash tests usually involve vehicle trajectories which are not straight and cannot be performed with the usual testing system. In order to increase the testing capabilities, a new guiding system was developed. An in-loop processing of the images filmed by a camera enables the vehicle to follow a path marked on the floor. An algorithm for image processing through colour filters was developed to identify the position of the line marked on the floor. Based on this input the steering wheel is rotated by an electric motor which receives the input of the electronic software. After a first phase of development, the system was able to identify the marked line on the floor and control the angle of the steering wheel to maintain the desired trajectory. However, the robustness should be increased.