Search Results

The gap between diesel vehicle emissions in laboratory tests compared to those in use has been addressed by the introduction of the Real Driving Emissions (RDE) requirements. Modern diesel technology now demonstrates low emissions on the road over a wide range of driving conditions. This paper further demonstrates that consistent low nitrogen oxide (NOx) and particle number (PN) emissions can be achieved over a wide range of driving conditions beyond Euro 6d RDE requirements, with emission control technologies combined in an integrated approach. An LNT (Lean NOx Trap) is combined with a dual-dosing SCR (Selective Catalytic Reduction) system. Low-load NOx control is achieved by the LNT in combination with a close-coupled SCR coated on the Diesel Particulate Filter (SDPF). High load conditions, on the other hand, are covered by the underfloor SCR system with a second AdBlue® injector.

Euro IV emissions limits have become a major milestone for the car industry in Europe. To comply with reduced emissions targets, a significant effort was required to minimize light-off time and to improve steady state performance for the pollutants HC and NOx. The main challenges and the technical solutions are discussed in this present work. Among them are substantial catalyst improvements needed to accommodate the progressively more severe agings related to high-speed driving conditions in Europe, and the close-coupled location of the catalyst, with the introduction of the converter welded directly to the exhaust manifold. Vehicles equipped with Euro IV emissions systems have been running in the field for more than 2 years and have shown that only a systems approach, including optimized exhaust manifold and canning designs, robust engine calibration strategies and specifically developed washcoats, can lead to a cost effective emissions solution.

AECC, the Association for Emissions Control by Catalyst, conducted a test program to compare the newly developed World-harmonized Light vehicles Test Cycle (WLTC) with the current European regulatory New European Drive Cycle (NEDC) and the cold-start Common Artemis Driving Cycle (CADC). Vehicle engines and aftertreatment technologies were selected to cover a wide range of future systems. Six European commercially available passenger cars were chosen: three Euro 5 Gasoline Direct Injection cars, two Euro 6 Diesel cars and a Euro 5 non-plug-in gasoline hybrid car. The hybrid car was tested with three different battery state of charge: nominal, minimum charge, and maximum charge. Investigations on the test temperature were also conducted by comparing emissions at 25°C and at −7°C. Regulated gaseous emissions (HC, CO, NOx) and particulate mass and particles number were measured, together with additional pollutants such as CH4, NO2 and ammonia.