Refine Your Search

Search Results

Viewing 1 to 15 of 15
Standard

Coarse Droplet Water/Fuel Separation Test Procedure

2010-10-20
CURRENT
J1839_201010
To determine the undissolved water removal performance of a fuel/water separator under controlled laboratory conditions, using water droplets. This test method is applicable for diesel and biodiesel fuel.
Standard

FUEL FILTERS—INITIAL SINGLE-PASS EFFICIENCY TEST METHOD

1993-10-01
HISTORICAL
J1985_199310
This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test ensures that the particle retention ability of the filter is measured in a single pass as no appreciable loading or regression will occur.
Standard

FULL FLOW LUBRICATING OIL FILTERS MULTIPASS METHOD FOR EVALUATING FILTRATION PERFORMANCE

1988-06-01
HISTORICAL
J1858_198806
This standard establishes a multipass filtration performance test with continuous contaminant injection for lubricating oil filter elements. It also includes a procedure for determining the contaminant capacity, particulate removal characteristics, and pressure loss. It also includes a test currently applicable to lubricating oil filter elements which exhibit a 10 μm filtration ratio of less than 75 and a rated flow between 4 and 600 L/min. This standard provides a test procedure which yields reproducible test data for evaluating the filtration performance of a lubricating oil filter element.
Standard

Fuel Filter - Initial Single-Pass Efficiency Test Method

2023-12-13
CURRENT
J1985_202312
This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test ensure that the particle retention ability of the filter is measured in a single pass, as no appreciable loading or regression will occur.
Standard

Fuel Filter—Initial Single-Pass Efficiency Test Method

2006-08-09
HISTORICAL
J1985_200608
This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test, ensures that the particle retention ability of the filter is measured in a single pass as no appreciable loading or regression will occur.
Standard

STANDARD FUEL FILTER TEST FLUID

1997-06-01
HISTORICAL
J1696_199706
This SAE Standard defines the requirements for fluid to be used in the SAE Fuel Filter Test Procedures.
Standard

STANDARD FUEL FILTER TEST FLUID

1994-04-04
HISTORICAL
J1696_199404
This SAE Standard defines the requirements for fluid to be used in the SAE Fuel Filter Test Procedures.
Standard

Standard Fuel Filter Test Fluid

2017-04-18
CURRENT
J1696_201704
This SAE Standard defines the requirements for fluid to be used in the SAE Fuel Filter Test Procedures.
X