Search Results

To enable non-throttling operation of gasoline S.I. engine, we have manufactured engines equipped with a newly developed Hydraulic Variable-valve Train (HVT), which can vary its intake-valve closing-timing freely. The air-intake control ability of HVT engine is equivalent to conventional throttling engines. Combustion becomes unstable, however, under non-throttling operation at idling. For the countermeasure, newly designed combustion chamber has been developed. The reduction of pumping loss by the HVT depends on engine speed rather than load, and amounts to about 80 % maximum. A conventional engine-management system is not applicable for non-throttling operation. Therefore, new management system has been developed for load control.

In order to further reduce exhaust gas emissions, an investigation was carried out with premixed charge compression ignition (PCCI) combustion mode using conventional diesel fuel. Past research was carried out with early injection into shallow-dish piston bowl, combined with a narrow nozzle angle setting. Early injection significantly reduced NOX emissions, but some of the fuel spray adhered to the piston bowl surface creating a fuel wall-film which was a major cause in increasing soot, HC and CO emissions and fuel consumption [1]. As a possible solution to this issue, PCCI combustion mode operation on a direct injection diesel engine was investigated with fuel injection timing set close to top dead center (TDC). As a result, regardless of the fuel injection timing, increasing EGR reduced NOx emissions. In terms of fuel consumption, soot, HC and CO, however, fuel injection timing close to TDC was superior to earlier injection, due to the reduction in the fuel wall-film formation.

It is a generally accepted fact that the advantage of diesel engines over their gasoline-powered counterparts is superior fuel consumption. However, attempts to use diesel engines as car powerplants have been hampered by the associated increase in toxic emissions. Research was carried out with the objectives of achieving the lowest fuel consumption for a diesel-powered passenger vehicle in the 1,590kg equivalent inertia weight class while also meeting the 2005 European diesel exhaust emissions standards (EURO IV). This paper starts with a description of the experiments on combustion and the results of the simulations and experiments using a visualization apparatus, followed by a description of the fuel consumption, emissions and power performance of the engine when fitted in an actual vehicle. To begin with, the relationship between engine displacement and fuel consumption was investigated.