Search Results

The interaction of fuel sprays and airflow in the intake system of a port fuel-injected spark-ignition engine has been examined experimentally in a pulsating-flow rig which comprised the cylinder head and intake manifold of a production engine connected to a large-capacity plenum chamber, with the camshaft of the intake valves driven by an electrical motor at engine speeds between 1000 and 5000 rpm and with air sucked through the system by a suction fan. Static pressure measurements in the intake port showed periodic pulsations with frequencies of 360 and 200 Hz with open and closed valves, respectively, and these corresponded to quarter- and half-waves in the manifold and were independent of engine speed.

Laser Doppler velocimetry, phase Doppler anemometry and Mie scattering were applied to a single-cylinder, four-valve, spark-ignition gasoline research engine equipped with a fully transparent liner and piston, to obtain information about the tumble flow and the droplet size and velocity distributions during induction and compression, for lean air/fuel mixture ratios of 17.5 and 24 and with closed-valve and open-valve fuel injection. The mixture distribution obtained with the two injection strategies was correlated with flame images, pressure analysis and exhaust emissions which confirmed the advantages of combining open-valve injection with tumble to allow stable and efficient engine operation at an air/fuel ratio of 24 through charge stratification and faster flame growth.

The performance of a four-valve engine operating with combustion in all cylinders has been determined in terms of indicated mean-effective pressure, drivability and concentrations of unburned hydrocarbon in the exhaust gases with a stoichiometric mixture of gasoline and air and four injectors including two with air assist. In addition, size and velocity characteristics of the fuel sprays were measured with a phase-Doppler velocimeter outside and inside the engine. With operation at a steady rotational speed of 1200 rpm, the indicated mean- effective cylinder pressure and its covariance were found to be nearly constant with the initiation of injection from 150 to 600 degrees of crank angle after top-dead-centre of intake.

The spatial and temporal characteristics of a diesel spray injected into the atmosphere through a multi-hole nozzle used in small DI Diesel engines have been investigated by laser techniques as a function of pump speed and load. The results showed that spray tip penetration and velocity depend on injection frequency rather than injected volume and the spray is asymmetric during the early and main part of the injection period. In the time/space domain different structures have been identified within the injection period, with the early injection period characterized by a well atomized cloud of droplets, the main period by the spray head and a dense core and the late injection period by the disintegrating dense core and the spray tail. IN DIRECT-INJECTION DIESEL ENGINES for passenger cars, fuel is injected through multi-hole nozzles at high pressure to promote mixing with the rapidly swirling air inside the combustion chamber.