Search Results

This paper presents a study of mixture formation in the combustion chamber of a direct-injection SI engine. In-cylinder flow measurement was conducted using laser Doppler velocimetry (LDV) and particle image velocimetry (PIV), and visualization of fuel vapor behavior was done using laser-induced fluorescence (LIF). Further, fast response flame ionization detector (FID) was used to measure the hydrocarbon (HC) concentrations in the vicinity of the spark plug. Thereby mixture concentrations in the vicinity of the spark plug, within the mixture distribution observed using LIF, were quantified. Results revealed that an upward flow forms near the center of the cylinder in the latter half of the compression stroke and goes from the piston crown toward the cylinder head. This upward flow is caused by the synergistic effect of the swirl motion generated in the cylinder and the cylindrical bowl provided in the piston crown eccentrically to the central axis of the cylinder.

A gasoline-fueled homogeneous charge compression ignition (HCCI) engine with both direct fuel injection and negative valve overlap for exhaust gas retention was examined. The fuel was injected directly into the residual in-cylinder gas during the negative valve overlap interval for the purpose of reforming it by using the high temperature resulting from exhaust gas recompression. With this injection strategy, the HCCI combustion region was expanded dramatically without any increase in NOx emissions which were seen in the case of compression stroke injection. Injection timing during the negative valve overlap was found to be an important parameter that affects the HCCI region width. The injection timing also had the most suitable value in each engine load for the best fuel consumption. From this result, A new injection strategy in which only a portion of the fuel was injected during the negative valve overlap interval, while the rest of fuel was injected in intake stroke, was proposed.

A new numerical simulation system has been developed which predicts flow behavior of fuel film formed on intake port and combustion chamber walls of gasoline engines. The system consists of a film flow model employing film thickness as a dependent variable, an air flow model, and a fuel spray model. The system can analyze fuel film flow formed on any arbitrary three-dimensional configuration. Fuel film flow formed under a condition of continuous intermittent fuel injection and steady-state air flow was calculated, and comparison with experimental data showed the system possessing ability of qualitative prediction.