Search Results

The effects of injector deposits, combustion chamber deposits (CCD), and intake valve deposits (IVD) on exhaust emissions, fuel economy and engine performance have long been recognized in engine and fuel/detergent design. Because important elements of the engine design such as injector position, exhaust gas recirculation (EGR) ratio, and air fuel ratio (AFR) differ from those in port fuel injection (PFI) engines, direct injection spark-ignition (DISI) engines require specific evaluation methods. However, little data is available regarding engine deposits in the more recently produced DISI engines.

The effects of Injector deposits, Combustion Chamber Deposits (CCD), and Intake Valve Deposits (IVD) on exhaust emissions, fuel economy and vehicle performances have long been recognized in engine and fuel/detergent design. Because important elements of engine design such as injector position, exhaust gas recirculation (EGR) ratio, and air fuel ratio (AFR) differ from those of port fuel injection (PFI) engines, current existing test methods are not applicable. Therefore, the demand has been increasing year by year for specific evaluation methods for vehicles with direct injection spark ignition (DISI) engines which have spread rapidly worldwide. Oil and Auto Cooperation for International Standards (OACIS) of Japan selected the Mitsubishi DISI engine (4G93-1.8L) [1] and conducted engine bench tests to investigate the effects of deposits on operating conditions at 40km/h, 70km/h, 140km/h and WOT.

A bench engine test for evaluating the fuel efficiency of automotive crankcase oils using modern engines was developed. The fuel consumption was primarily proportional to the viscosity of the oils down to 5 mm2/s at operating temperatures, indicating that the use of low-viscosity oil was effective in improving fuel efficiency. This may be because the oil film would be formed easily, since sliding parts, such as valve train systems, in modern engines are finely finished. Organo molybdenum dithiocarbamates were effective in improving fuel efficiency at high temperature. A 2.7% improvement in fuel efficiency relative to conventional SAE 10W-30 oils was achieved by the combination of low-viscosity SAE 5W-20 oils and organo molybdenum dithiocarbamates under constant operating conditions with engine speed 1,500 rpm and torque 37.2 N•m.