Search Results

A conventional single cylinder direct injection diesel engine was fitted with three fuel injectors: one mounted vertically on the center, and the others mounted diagonally from the side direction. With this system, it was possible to control the fuel injection timing and injection quantity of each injector independently. It was also possible to independently control the fuel injection pressure of the center and side injectors. Using this system, it was possible to control the spatial and temporal distributions of the fuel injected into the combustion chamber, which are impossible to obtain with conventional injection equipment. In this study, an improvement in particulates and specific fuel consumption was obtained, while maintaining low NOx, by injecting a small amount of fuel from the two side injectors after the main fuel injection from the center injector.

Since a NOx trap catalyst cyclically releases and reduces NOx with rich exhaust gas, generating of a rich spike becomes important for application to diesel engines, which always operate with overall lean combustion. In addition, a NOx trap catalyst is poisoned and degraded in performance by the presence of SO2 in the exhaust gas. When the NOx absorbing efficiency thus decreases, it is necessary to regenerate the catalyst by a sulfur purge (desulfation) process in order to remove SO2. It is apparent that there are many factors and effects to understand before one can apply this catalyst system to a diesel engine, therefore we have carried out an inquiry into a performance of the NOx catalyst used the model gas equipment with known gas mixtures. The rich spike was generated with diesel fuel (light oil), resulting in a transient equivalence ratio spike > 1, to simulate diesel exhaust gas.

Although diesel engines have high thermal efficiency and excellent reliability, legislation in locations worldwide are calling for further reductions in nitrogen oxide (NOx) and particulate matter (PM). One possible method of compliance is a urea-SCR catalyst system to reduce NOx. It is widely known, and has been demonstrated in stationary engines, that there is a significant NOx reduction effect when a sufficient catalyst activation temperature is obtained. Recently several commercial vehicles have been outfitted a urea-SCR system to and characterized their NOx reduction effects. This report outlines the basic characteristics of the urea-SCR system, and evaluation of the effectiveness when used for heavy-duty diesel powered commercial vehicles. First, in order to investigate the basic characteristics of the urea-SCR catalyst, NOx reduction characteristics were measured using model gas equipment.

Exhaust gas recirculation (EGR) is widely used in diesel engines to reduce nitrogen oxide emissions. To meet the strict emission regulations, e.g., Real Driving Emissions, the EGR system is required to be used at temperatures lower than the present ones. However, under cool conditions, an adhesive deposit forms on the EGR valve or cooler because of the particulate matter and other components present in the diesel exhaust. This causes sticking of the EGR valve or degradation of the heat-exchange performance, which are serious problems. In this study, the EGR deposit formation mechanism was investigated based on spatially- and time-resolved scanning electron microscopy (SEM) observation. The deposit was formed in a custom-made sample line using real exhaust emitted from a diesel engine. The exhaust including soot was introduced into the sample line for 24 h (maximum duration), and the formed deposit was observed using SEM.

Mankind developed and enjoyed the automobile civilization, and has lauded the prosperity that it brought about. Commercial vehicle launched the heavy duty diesel engine have been contributing by main transportation system for development of society in the world. However both the local and global environment issues appear depend on the life of mankind, in the world. Especially, global warming is the most stringent issue for our life on the earth. We human beings must lay our existence on the line, and call upon expertise to create solutions for this situation. Diesel engine has great potential for the global warming compatibility by it's high thermal efficiency and diesel vehicle is expected to conserve the environment and to improve the fuel saving for keeping resources in the world. This paper introduces the surrounding of the automobile, such as exhaust emission regulation for heavy duty diesel vehicle, amount and contribution of CO2 emission and noise.

To reduce exhaust emissions and fuel consumption, the effect of high pressure fuel injection was investigated with in-cylinder fuel spray observation and single cylinder engines. Spray impingement on the cavity wall promotes mixing with air and reduction in the nozzle area extends this wall impingement as a result of increasing both fuel injection pressure and injection period. There exists an optimum range for the injection period. Increased injection pressure by modifying injection rate of fuel pump and nozzle area, improves smoke and fuel consumption at low and medium speeds in particular. To extend these effects of high pressure injection, more optimized combustion system and minimized injection equipment drive torque must be required. To resolve the problem of high pressure injection such as higher combustion noise and increase in NOx emissions, the combination with pilot injection must be one of the most effective ways.

A premixed compression-ignited (PCI) combustion system, which realizes lean combustion with high efficiency and low emissions, was investigated and its effects and problems were ascertained. With PCI combustion, fuel was injected early on the compression stroke and a premixed lean mixture was formed over a long mixing period. The test engine was operated with self-ignition of this premixed lean mixture. From the results of combustion observation and numerical simulation, a need to prevent the fuel spray from adhering to the cylinder liner and combustion-chamber wall was identified. Consequently, an impinged-spray nozzle with low penetration was made and tested. As a result, an extremely low nitrogen-oxide (NOx) emission level was realized but fuel efficiency was detracted slightly. Also, the engine operating range possible with PCI combustion was found to be limited to partial-load conditions and PCI combustion was found to cause an increase in hydrocarbon (HC) emission.