Search Results

This SAE Aerospace Information Report (AIR) describes procedures for use in the field to determine if 115/200 Volt, 400 Hz aircraft external electrical power connectors are excessively worn, which may result in the inability of the external power plug to be retained, intermittent electrical performance and arcing.

This SAE Aerospace Information Report (AIR) describes procedures for use in the field to determine if 115/200 Volt, 400 Hz aircraft external electrical power connectors are excessively worn, which may result in the inability of the external power plug to be retained, intermittent electrical performance and arcing.

The scope of this Standard is the definition of the response of a numerically controlled machine to a valid sequence of records made up of 32 bit binary words or ASCII text strings. The Standard defines the structure of these records and of the 32 bit binary words or ASCII text strings which make up the records. This standard addresses the control of machines capable of performing 2, 3, 4, and 5 axis motion of an active tool (mill, laser, pen, etc.) relative to a part, and those capable of 2 and 4 axis tool motion relative to a rotating part (turning machines), including parallel tool slide sets capable of concurrent (merged) motion.

이 문서는 공급자가 9100의 조항을 준수하고자 할 때 AQAP-2110을 적용하는 것에 관한 정보와 지침을 제공하기 위해 작성 및 발행된 것이다. 이 문서는 AQAP-2110-SRD.2 및 IA9137로 간행된다. 이는 NATO와 산업계에서 AQAP-2110과 9100 간의 관계에 대한 이해와 활용을 촉진하기 위해 NATO와 산업계 대표들이 공동으로 작성한 것이다. 획득 국가가 자국의 조달 방법으로 대외군사판매(FMS)를 이용할 때는 AQAP가 필요할 수 있다. 이 문서는 획득 국가와 9100을 준수하고자 하는 공급 국가의 AQAP-2110 요구사항 해석에 있어 공통성을 제공하는 데에 목적을 두고 있다. 이 문서의 내용은 법적 또는 계약상의 지위를 갖지 않으며, 일체의 AQAP-2110 또는 9100 요구사항을 대체하거나 그 요구사항에 추가되는 것도 아니다. 있을 수 있는 조건의 다양성(작업 또는 공정의 유형, 사용 기기 및 관련 인원의 역량에 따르는) 때문에, 이 지침이 모든 것에 적용되는 것으로 간주하거나, 계약 요구사항 충족에 필요한 특정 수단 또는 방법을 강요하는 것으로 간주해서는 안 된다. 이해당사자들은 이러한 요구사항을 충족하기 위해 다른 수단 또는 방법을 사용할 수도 있다는 점을 알고 있어야 한다. 이 지침 사용자는 계약서에 명시되는 바와 같이 AQAP 2110 요구사항이 공급자와 하청업체가 지켜야 하는 의무사항임을 명심해야 한다.

この文書は、供給者が9100の規定を遵守する場合の、AQAP-2110の適用に関する情報及びガイダンスを提供するために作成され、発行された。この文書は、AQAP-2110-SRD.2及びIA9137として発行されている。この文書は、NATO及び業界によるAQAP-2110及び9100の関係の理解及び利用を容易にするために、NATO及び業界の代表者が協同で策定した。AQAPは、調達国が対外有償軍事援助（FMS）を調達手段として利用する場合に、必要となる場合がある。 この文書の目的は、調達者及びその9100供給者によるAQAP-2110要求事項の解釈の共通化に寄与することである。 この文書の内容は法的位置づけも契約上の位置づけも有せず、AQAP-2110の要求事項又は9100の要求事項のいずれに対しても取って代わるものでも、追加するものでも、削除するものでもない。 様々な状況が、作業、工程の種類、又は使用される機器、及び関わる要員のスキルのような要因に左右されて存在し得るため、このガイダンスは網羅的なものと見なされることも、また、契約書の要求事項を満たすための特定の手段や方法を義務付けるものと見なされることも望ましくない。ステークホルダーは、これらの要求事項を満たすために、他の手段や方法が使用され得ることを認識すべきである。 このガイダンスの利用者は、AQAP 2110要求事項が、契約書に引用されているとおり、供給者や二次供給者に義務付けられていることに留意することが望ましい。

This test method describes a procedure for determining the insoluble contamination level of the downstream side of filter elements. Results of this procedure are intended to be used only for evaluation of the effectiveness of various cleaning treatments, or cleanliness of element as received from manufacturers. The data obtained by this procedure do not necessarily indicate, qualitatively or quantitatively, the contamination which may be released by a filter element into a fluid during service use. Because of the wide variety of conditions which may exist in service applications, it is recommended that the user design and conduct his own particular service performance test. (See paragraph 10.1).

This document establishes training guidelines applicable to fiber optic fabricator technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production

This document establishes training guidelines applicable to fiber optic safety training, technical training and fiber awareness for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems.

This document establishes training guidelines applicable to fiber optic safety training, technical training and fiber awareness for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Logisticians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Shipping Receiving Production Purchasing

This document establishes training guidelines applicable to fiber optic installer technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Logisticians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Shipping Receiving Production Purchasing

This document establishes training guidelines applicable to fiber optic installer technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Logisticians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Shipping Receiving Production Purchasing

This document establishes training guidelines applicable to fiber optic technician, quality assurance, or engineer technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production

This document establishes training guidelines applicable to fiber optic technician, quality assurance, or engineer technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production

This document describes requirements for standardized processes (and associated technologies) that ensure type design data are retrievable and usable for the life of a type certificate (50+ years). These processes are primarily concerned with, but not limited to, digital type design data retained in three-dimensional representations and associated data that is required for complete product definition, such as tolerances, specification call-outs, product structure and configuration control data, etc. This process standard includes process requirements for managing the evolution of technologies required to ensure the availability of the data for the life of the product. This data must be available to meet regulatory, legal, contractual and business requirements. This process standard is not intended to incorporate every company specific requirement and does not dictate specific organizational structures within a company.

This document establishes re-certification guidelines applicable to fiber optic fabricator technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production

This document is intended to establish preferred abbreviations for terms used on panels, controls, displays, instruments, placards, and markings. The recommendations apply to equipment used by crew members in the flight deck of transport aircraft. The abbreviations, acronyms, and symbols do not supersede those used in airworthiness regulations or aeronautical charts or other aircraft documents.

The scope of this SAE Information Report is to supply the user with sufficient information so that he may decide whether acoustic emission test methods apply to his particular inspection problem. Detailed technical information can be obtained by referring to Section 2.

This SAE Recommended Practice provides test methods for determining the characteristics of acoustical and thermal materials. Where applicable, methods of test developed by SAE and ASTM have been referenced.