Search Results

The University of Maryland team converted a model year 2000 Chevrolet Suburban to an ethanol-fueled hybrid-electric vehicle (HEV) and tied for first place overall in the 2000 FutureTruck competition. Competition goals include a two-thirds reduction of greenhouse gas (GHG) emissions, a reduction of exhaust emissions to meet California ultra-low emissions vehicle (ULEV) Tier II standards, and an increase in fuel economy. These goals must be met without compromising the performance, amenities, safety, or ease of manufacture of the stock Suburban. The University of Maryland FutureTruck, Proteus, addresses the competition goals with a powertrain consisting of a General Motors 3.8-L V6 engine, a 75-kW (100 hp) SatCon electric motor, and a 336-V battery pack. Additionally, Proteus incorporates several emissions-reducing and energy-saving modifications; an advanced control strategy that is implemented through use of an on-board computer and an innovative hybrid-electric drive train.

Continuously Variable Cam Phasers (CVCP) controlling both the exhaust and intake camshaft phasing in combination with air assist direct fuel injection and a wide variable spark gap is utilized to reduce the fuel consumption for a 4-valve Turbo Charged (TC) Spark Ignition (SI) engine. The spark plug and the air-assisted direct fuel injector are integrated into one unit in order to facilitate packaging in a modern 4-valve combustion chamber. This integrated component is referred to as the Spark Plug Injector (SPI). CVCP's are used to reduce pumping work by diluting the charge with large amounts of residual exhaust gas. This strategy, along with stoichiometric homogeneous operation enables the use of a Three Way Catalyst (TWC), considered to be a prerequisite to meet the emission standards of Ultra Low Emission Vehicles (ULEV) II and beyond. The ignition quality deteriorates with increasing levels of residual exhaust gas dilution.

A breakthrough catalyst technology utilizing new mixed metal oxides in conjunction with Platinum Group Metals has been developed. Stable synergies are designed into the catalyst washcoat that enable high performance and durability to be achieved at low Platinum Group Metal usage. Extensive vehicle data is reported on catalysts aged using a variety of high-temperature accelerated aging cycles. Vehicle performance at the LEV, ULEV and LEV-II levels is discussed in the context of unique calibration-catalyst interactions. Conclusions concerning further areas of improvement and future applications are also reviewed.

The LEV II and EURO V legislation in 2007/2008 require a high conversion level for nitrogen oxides to meet the emission levels for diesel SUVs and trucks. Therefore, U.S. and European truck manufacturers are considering the introduction of urea SCR systems no later than model year 2005. The current SCR catalysts are based mainly on systems derived from stationary power plant applications. Therefore, improved washcoat based monolith catalysts were developed using standard types of formulations. These catalysts achieved high conversion levels similar to extruded systems in passenger car and truck test cycles. However, to meet further tightening of standards, a new class of catalysts was developed. These advanced type of catalytic coatings proved to be equivalent or even better than standard washcoat formulations. Results will be shown from ESC, MVEG and US-FTP 75 tests to illustrate the progress in catalyst design for urea SCR.

This paper reports on DaimlerChrysler's participation in the Ad Hoc Diesel Fuels Test Program. This program was initiated by the U.S. Department of Energy and included major U.S. auto makers, major U.S. oil companies, and the Department of Energy. The purpose of this program was to identify diesel fuels and fuel properties that could facilitate the successful use of compression ignition engines in passenger cars and light-duty trucks in the United States at Tier 2 and LEV II tailpipe emissions standards. This portion of the program focused on minimizing engine-out particulates and NOx by using selected fuels, (not a matrix of fuel properties,) in steady state dynamometer tests on a modern, direct injection, common rail diesel engine.

The effect of fuel preparation on time-resolved, engine-out hydrocarbon (HC) emissions over a Federal Test Procedure cycle [FTP (75CVS)] for a ULEV vehicle equipped with a 6 cylinder engine has been investigated. Using a single-cone injector, the HC mole fraction in Bag 1 increased by a factor of 3-4 during each of the three accelerations in the first 100 sec after start. No such increases were observed in Bag 3 when the engine was fully warm. The increases during accelerations in Bag 1 were reduced by a factor of 3 when using a Dual-cone fuel injector as a drop-in substitute. The total, tailpipe FTP (75CVS) mass emissions were 25% smaller when using the Dual-cone injector. These results demonstrate that fuel preparation can affect HC emissions from a vehicle very significantly during cold start as has been deduced previously during cold-start tests using a dynamometer-controlled engine.

In preparation for compliance with California's SULEV standard and Euro STAGE 4 standard, which will take effect in 2002 and 2005, respectively, we have developed a laminated planar oxygen sensor. The developed sensor has the following characteristics: high thermal conductivity and superior dielectric characteristic, due to direct joining of the heater element alumina substrate and the sensor element zirconia electrolyte; low heat stress at temperature rise, due to optimized heater design; superior sensor protection from water droplets, and improved sensor response, due to optimized arrangement of intake holes in the sensor cover. With these characteristics, the developed oxygen sensor can be activated in 10 seconds after cold start. This report describes the technologies we used to develop the early-activation oxygen sensor.

This paper describes the second generation of the partial zero emission vehicle (P-ZEV) technology that was developed for use on the Nissan Sentra CA sedan sold in California.1,2 The second-generation engine has been adopted on a mass-produced model marketed in Japan. Besides continuing the super ultra low emission vehicle (SULEV) performance of the Sentra CA, the second-generation technology incorporates a compact, two-stage HC trap catalyst system. The system has been substantially reduced in size and cost as a result of improving the catalyst and the substrate and reducing the total catalyst volume by optimizing the control method. Moreover, the second-generation P-ZEV technology includes an electrically actuated continuously variable swirl control valve of the high-speed jet type, a high-response electrically actuated EGR valve and catalyst model control based on the use of an air-fuel ratio sensor.

In succession to the world-first introduction of a mass production gasoline hybrid passenger car into the Japanese market in 1997, Toyota also has introduced an enhanced version of the above to the US and European markets in 2000. Upon introduction of Toyota Hybrid System (THS) into the US market, a drastic reduction of gasoline vapor evaporation from the fuel tank was necessary, in order to meet the most stringent exhaust emission (SULEV) and evaporative emission standards in the world. In order to meet this requirement, a fuel tank system named “Vapor Reducing Fuel Tank System” was developed. This is the first commercial application in the world to use a variable tank volume to drastically reduce gasoline vapor generation.

A full size V8 demonstrator was developed to exhibit technology required to target LEV II emission levels. The testing involved the system integration of a vacuum-insulated catalytic converter (VICC) technology, air gap exhaust components, optimized catalyst loading and control system and calibration. The development strategy utilizes the vacuum insulation, phase-change thermal storage capacity, and cold start calibration strategy to enable the catalyst to quickly reach light-off in 6 seconds over the FTP-75. All emission testing was conducted with two LA4 preparation cycles. This approach is able to reduce the heat loss of the catalytic converter brick during a 12 hour soak period and optimize the calibration warm-up strategy to reduce the amount of emissions during the first 60 seconds of the FTP-75. The vehicle used for the demonstration was a BMW 540I application. The modifications to the vehicle were limited to the control system, engine calibration and aftertreatment.

Numerical models for a variety of vehicle emission measurement systems have been developed using Mathematica® software. The sampling systems evaluated include the Constant Volume Sampler (CVS) and the Bag Mini-Diluter (BMD). The CVS system was evaluated as the conventional fixed flow rate system and in a number of configurations designed for improved performance. The enhanced CVS system employs flow rate switch between phases and heated dilution air. This system with various other enhancements was also evaluated. The additional enhancements included proportional ambient sampling, dilution air refinement, heating of system including bags, and heated system with dilution air refinement. Lastly, the Bag Mini-Diluter system was evaluated. The purpose of these models is to help determine which system will be the most effective strategy for Ford Motor Company to utilize for SULEV and below emission measurements.

In an age when there is growing tension between customer expectations of high engine performance, low fuel consumption and compliance with the legal requirements on the emission of airborne pollution, the ability of a vehicle to meet the most stringent emission standards is becoming an increasingly important aspect of its market appeal. The 1.8 l, 5-valve turbo engine which Audi launched in 1994 represented an emissions concept which, thanks to its innovative close-coupled catalytic converter, provided an ideal basis for further development to an engine meeting the US ULEV emission standard, as the current engine does [1]. Its configuration as a ULEV concept necessitated the blanket optimisation of all components which influence the exhaust emissions. The pistons and injectors were improved in order to reduce untreated emissions.

This paper describes the motivation for developing hydrogen-fueled engines for use in hybrid electric vehicles of the future. The ultimate motivation for using hydrogen as an energy carrier is carbon management. However, air quality concerns also provide motivation for developing hydrogen-fueled vehicles. For this reason, we discuss the position of the hydrogen-powered hybrid vehicle within the California Air Resources Board requirement for Zero Emission Vehicles. We describe the expected performance of an electrical generation system powered by a four-stroke, spark-ignited, internal combustion engine for a hydrogen-powered hybrid vehicle. The data show that the engine-out emissions of NOx will allow the vehicle to operate below the Super Ultra-Low Emission Vehicle standard set by the California Air Resources Board. The engine can run on either hydrogen or blends of hydrogen and natural gas. The engine can be optimized for maximum efficiency with low emissions.

Fulfillment of SULEV standards without catalyst - this is a target engineers at IAV have been working on since the middle of the 1990s. The core of this development is an advanced steam engine with a high performance burner. This burner features extremely low raw pollutant emission. This paper describes new solutions that were found to solve the challenging tasks in the development of such an engine concept.

Current EPA and CARB regulations allow a maximum of 2.0 g/test for Hot Soak + Diurnal evaporative emissions. The State of California has adopted LEV II regulations that will decrease the evaporative emissions standard to 0.5 g/test starting in the 2004 model year. These regulations also include a Zero Emission Vehicle or ZEV program. The ZEV program allows car manufacturers to substitute vehicles that meet the SULEV tail pipe emission standards and have zero fuel evaporative emissions for electric vehicles. The increased stringency of these regulations has necessitated significant decreases in hydrocarbon emissions from evaporative emission canisters. For example, canister vent emissions may be at levels of 100-300 mg/test for a vehicle that meets the current regulations. However, canister emission targets should be 50 mg/test and less for LEV II and 10 mg/test and less for zero evaporative emission vehicles.

For years, secondary air injection Systems have been used to reduce hydrocarbon exhaust emissions for a short period after engine cold start. In the beginning, passive secondary air systems were used, with the airflow driven by the pressure pulsations in the exhaust system. Since 1990, for most applications, active secondary air systems (i. e., systems where air is injected into the hot exhaust gases by a pump) have been employed. Secondary air injection into the hot exhaust gases is realized by a d-c motor driven turbine pump, i. e. a secondary air pump, and a control valve. Numerous factors, including raw engine emissions during cold start and warm up, driveability requirements and the need to adapt to different emissions legislation, dictate the use of secondary air injection systems. The development of other exhaust aftertreatment systems, e. g., close-coupled or heated catalysts as well as packaging and cost factors will influence the market penetration of secondary air systems.

This paper compares and discusses the impact of conventional and improved start strategies on the design of the exhaust aftertreatment system. It is recognised that hardware measures on the exhaust side will not be sufficient if Volvo's 5 and 6 cylinder engines are to fulfil SULEV emission levels, assuming passive three way systems only. A new start strategy, providing an excessive heat profile combined with low engine out hydrocarbon emissions, was therefore developed. Temperature profiles, raw emissions and mass flow obtained with the Lean Start Calibration will be shown for the 5 and 6 cylinder engines, both naturally aspirated as turbo. The remaining part of the paper presents a brief history of the exhaust aftertreatment design modifications for Volvo's 5 cylinder N/A engine fulfilling LEV, ULEV I, ULEV II and PZEV emission levels respectively. The impact of the new start strategy on the cold start performance will be shown.

Today, SULEV legislation represents the most stringent emission standard for vehicles with combustion engines, and it will be introduced starting by Model Year 2003. In order to meet such standards, even higher effort is required for the development of the exhaust gas emission concept of SI engines. Beyond a facelift of the combustion system, exhaust gas aftertreatment, and the engine management system, new approaches are striven for. The principle keys are well known: low HC feed gas, high thermal load for quick light-off, exhaust system with low heat capacity and highly effective exhaust gas aftertreatment.

To reduce the amount of fuel vapor created in the fuel tank, we developed a variable-capacity, plastic bladder fuel tank that is efficient, reliable, and provides permeation prevention performance. This bladder fuel tank changes in shape and total capacity in accordance with the volume of fuel it holds. Thus, in contrast to the conventional fuel tank, it can dramatically reduce the amount of fuel vapor that is ordinarily created in the fuel tank while the vehicle is being refueled, parked, or driven. The bladder fuel tank has been adopted in the Vapor Reducing Fuel Tank System of the North American model Prius, a vehicle that operates under the Toyota Hybrid System (THS), which complies with the SULEV exhaust emission requirement. This paper primarily gives an outline of the technology for manufacturing the bladder fuel tank.

In order to match catalyst OBDII conditions the common procedure is oven aging with air, which is not suitable for complete converter systems due to mantle corrosion. The goal was, therefore, to find an alternative procedure to ensure a defined catalyst aging that would match 1,75 times the emission standard and is also good for SULEV. The new procedure currently being developed allows the aging of metal and ceramic catalysts as well as complete catalyst systems. The paper will present the aging process, emission data of fresh and aged catalysts and the feedback to the test car OBDII system.