Refine Your Search

Date

Date

Topic

Topic

Author

Author

Automotive Standard Interiors, Cabins, and Cockpits

Search Results

Viewing 1 to 20 of 727
123Next >Last >>
Sort by title
Standard

A/C Compressor Oil Separator Effectiveness Test Standard
2019-07-15
CURRENT
J3112_201907
This SAE Standard establishes the test conditions and reporting method for quantifying refrigerant circuit oil circulation rate (OCR) reduction effectiveness of mobile air conditioning compressors using R-134a and R-1234yf refrigerants that include oil separators and/or other design features for the purpose of reducing the OCR in the refrigerant circuit. This standard and the OCR values it produces are not intended to make judgement on suitability of OCR values with regard to compressor durability.
Standard

A/C Compressor Oil Separator Effectiveness Test Standard
2017-03-07
HISTORICAL
J3112_201703
This SAE Standard establishes the test conditions and reporting method for quantifying refrigerant circuit oil circulation rate (OCR) reduction effectiveness of mobile air conditioning compressors using R-134a and R-1234yf refrigerants that include oil separators and/or other design features for the purpose of reducing the OCR in the refrigerant circuit.
Standard

ACCELERATED EXPOSURE OF AUTOMOTIVE INTERIOR TIRM COMPONENTS USING A CONTROLLED IRRADIANCE WATER COOLED XENON-ARC APPARATUS
1992-03-01
HISTORICAL
J1885_199203
This test method specifies the operating procedures for a controlled irradiance, water cooled xenon-arc apparatus used for the accelerated exposure of various automotive interior trim components. Test durations, as well as any exceptions to the sample preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers.
Standard

ACCOMMODATION TOOL REFERENCE POINT
1985-10-01
HISTORICAL
J1516_198510
Reference lines have been developed to which driver workspace accomodation tools can be located in vehicle space. The lines describe horizontal reference point locations as a function of vehicle H-point height (H30). One reference line has been established for use in vehicles with H-point heights (H 30) and steering wheel diameters (W9) less than 405mm and 450mm, respectively. (Class A Vehicles) This point can be used to reference appropriate workspace tools to accommodate a driver population with a male to female ratio of one to one. Separate reference lines have been established for use in vehicles with H-point heights (H30) between 405 and 530mm and steering wheel diameters (W9) between 450 and 560mm with treadle type pedals. (Class B Vehicles) See Fig. 1. Three lines are available for use in Class B vehicles depending on the percentages of males and females in the population the designer wishes to accommodate.
Standard

ACOUSTICAL AND THERMAL MATERIALS TEST PROCEDURE
1989-10-01
HISTORICAL
J1324_198910
This SAE Recommended Practice provides test methods for determining the characteristics of acoustical and thermal materials. Where applicable, methods of test developed by SAE and ASTM have been referenced.
Standard

ALTERNATE REFRIGERANT CONSISTENCY CRITERIA FOR USE IN MOBILE AIR CONDITIONING SYSTEMS
1993-06-01
HISTORICAL
J1658_199306
This SAE Recommended Practice applies to refrigerant blends (multicomponent refrigerants) intended for use as retrofit refrigerants to replace CFC-12 (R12) in mobile air conditioning systems. Since the composition of non-azeotropic refrigerant mixtures changes as refrigerant is lost, either through the vapor phase or the liquid phase, the method of charging air conditioning systems is important. The purpose of this document is to determine the proper refrigerant phase, liquid or vapor, for system charging by relating system performance changes to the charging method. This document is complete only when combined with the requirements of SAE J1657.
Standard

ANCHORAGE PROVISIONS FOR INSTALLATION OF CHILD RESTRAINT TETHER STRAPS IN REAR SEATING POSITIONS
1992-03-20
HISTORICAL
J1369_199203
This SAE Recommended Practice provides design guidelines to vehicle manufacturers by establishing the characteristics of top tether anchorage provisions required for securing child restraints so equipped in forward facing rearmost designated passenger seating positions of all passenger cars, multipurpose passenger vehicles, and trucks and buses of 4500 kg (10 000 lb) Gross Vehicle Weight Rating or less, accommodating six occupants or less. Further, it provides interface information to child restraint manufacturers.
Standard

ANCHORAGE PROVISIONS FOR INSTALLATION OF CHILD RESTRAINT TETHER STRAPS IN REAR SEATING POSITIONS
1997-10-01
HISTORICAL
J1369_199710
This SAE Recommended Practice provides design guidelines to vehicle manufacturers by establishing the characteristics of top tether anchorage provisions required for securing child restraints so equipped in forward facing rearmost designated passenger seating positions of all passenger cars, multipurpose passenger vehicles, and trucks and buses of 4500 kg (10 000 lb) Gross Vehicle Weight Rating or less, accommodating six occupants or less. Further, it provides interface information to child restraint manufacturers.
Standard

ANODIZED ALUMINUM AUTOMOTIVE PARTS
1985-02-01
HISTORICAL
J399_198502
Automotive parts can be fabricated from either coiled sheet, flat sheet or extruded shapes. Alloy selection is governed by finish requirements, forming characteristics, and mechanical properties. Bright anodizing alloys 5657 and 52521 sheet provide a high luster and are preferred for trim which can be formed from an intermediate temper, such as H25. Bright anodizing alloy 5457 is used for parts which require high elongation and a fully annealed ("0") temper. Alloy 6463 is a medium strength bright anodizing extrusion alloy; Alloy X7016 is a high strength bright anodizing extrusion alloy primarily suited for bumper applications. To satisfy anti-glare requirements for certain trim applications, sheet alloy 5205 and extrusion alloy 6063 are capable of providing the desired low-gloss anodized finish.
Standard

APPLICATION TESTING OF OIL TO AIR OIL COOLERS FOR COOLING PERFORMANCE
1985-11-01
HISTORICAL
J1468_198511
This Recommended Practice is applicable to oil to air oil coolers installed on mobile or stationary equipment. This document outlines the method of procuring the test data to determine operating characteristics of the oil cooling system and the interpretation of the test results.
Standard

APPLICATION TESTING OF OIL-TO-AIR OIL COOLERS FOR COOLING PERFORMANCE
1993-05-20
HISTORICAL
J1468_199305
This SAE Recommended Practice is applicable to oil-to-air oil coolers installed on mobile or stationary equipment. This document outlines the method of procuring the test data to determine operating characteristics of the oil cooling system and the interpretation of the test results.
123Next >Last >>
X