Search Results

Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS

1992-02-01

HISTORICAL

J531_199202

This SAE Standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figures 1 to 6 and Tables 1 to 4) commonly used in automotive and related industrial applications.

Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS

1981-01-01

HISTORICAL

J531_198101

This standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figs. 1-6 and Tables 2-4) commonly used in automotive and related industrial applications.

Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS

1994-06-01

HISTORICAL

J531_199406

This SAE Standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figures 1 to 6 and Tables 1 to 4) commonly used in automotive and related industrial applications.

Best Practice

AVSC Best Practice for First Responder Interactions with Fleet-Managed Automated Driving System-Dedicated Vehicles (ADS-DVs)

2024-04-04

CURRENT

AVSC-I-01-2024

This AVSC best practice was first published in 2020 and has been revised to cast expanded role definitions, rearrangement of use cases in Section 4 based on severity of risk, re-creation of Table 4 in 5.4 as a checklist and moved to Appendix B, as well as clarification of sections, examples, and terms throughout the document. This document outlines interactions between first responders and ADS-DVs (SAE level 4 and level 5). It builds on earlier work done by the Crash Avoidance Metrics Partners (CAMP), detailing three types of interactions first responders may encounter: direct, indirect, and informational. In addition, a standardized framework with recommendations for an interaction plan is laid out for ADS developers, manufacturers, and fleet operators which may assist first responders in both emergency and non-emergency situations involving ADS-DVs.

Standard

Air Brake Valve - Performance Requirements

2020-12-18

CURRENT

J1410_202012

This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity

Standard

Air Brake Valve - Performance Requirements

2016-07-20

HISTORICAL

J1410_201607

This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity

Standard

Air Brake Valve Input-Output Characteristic Requirements

2016-06-17

CURRENT

J1861_201606

This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)

Standard

Air Brake Valve Input-Output Characteristic Requirements

2011-09-12

HISTORICAL

J1861_201109

This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)

Standard

Average Vehicle Dimensions for Use in Designing Docking Facilities for Motor Vehicles

2011-06-13

CURRENT

J699_201106

This SAE Recommended Practice establishes limits for empty vehicle floor heights and provides limits of vehicle dimensions for use in designing docking facilities for motor vehicles.

Standard

Brake Force Distribution Field Test Procedure for Truck and Bus

2003-04-29

HISTORICAL

J225_200304

This SAE Recommended Practice provides a field test procedure and instructions for: a Instrumentation and Equipment b Vehicle Preparation c Test of air-braked single and combination vehicles d Calculation of brake force distribution e This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505.

Standard

CAPACITY RATING—ELEVATING SCRAPERS

1993-06-01

HISTORICAL

J957_199306

This SAE Standard specifies a procedure for approximating the volume of a typical material carried in the bowl of an elevating scraper as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and a representative volume on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.

Standard

CAST STEEL SHOT

1969-01-01

HISTORICAL

J827_196901

Standard

CUTTING EDGE—DOUBLE BEVEL CROSS SECTIONS

1986-06-01

HISTORICAL

J738_198606

This standard is for cutting edge sections typically used in earthmoving machinery defined in SAE J1507: a Tractor - Scrapers as defined in SAE J728. b Dozers as described in SAE J729 and J173. c Loaders as described in SAE J731. d Graders as described in SAE J870. Hole spacing is defined for dozers and scrapers in J737 and graders in J739. Hole conformation is defined in J740.

Standard

Cast Shot and Grit Size Specifications for Cleaning and Peening

2023-06-27

CURRENT

J444_202306

This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.

Standard

Cast Shot and Grit Size Specifications for Peening and Cleaning

2017-10-10

HISTORICAL

J444_201710

This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E 11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.

Standard

Classification, Nomenclature, and Specification Definitions for Directional Drilling Tracking Equipment

2013-01-02

CURRENT

J2520_201301

This SAE Standard applies to directional drilling electronics and tracking equipment of the following types: - Tracking Transmitter - Tracking Receiver - Telemetry Device - Remote Display This type of tracking equipment is typically used with Horizontal Earthboring Machines as defined in SAE J2022.

Standard

Classification, Nomenclature, and Specification Definitions for Directional Drilling Tracking Equipment

2022-02-24

WIP

J2520

This SAE Standard applies to directional drilling electronics and tracking equipment of the following types: a. Tracking Transmitter b. Tracking Receiver c. Telemetry Device d. Remote Display This type of tracking equipment is typically used with Horizontal Earthboring Machines as defined in SAE J2022. The purpose of this document is to define common terms and commercial specifications associated with tracking equipment used in the horizontal earthboring industry.

Standard

Crane Boomstop

2017-10-09

CURRENT

J220_201710

This SAE Recommended Practice applies to the boomstop for the main boom of all mobile construction type cranes having rope supported booms, equipped for hook work, clamshell, magnet, grapple, or concrete bucket attachments.

Standard

Crane Boomstop

2012-02-06

HISTORICAL

J220_201202

This SAE Recommended Practice applies to the boomstop for the main boom of all mobile construction type cranes having rope supported booms, equipped for hook work, clamshell, magnet, grapple, or concrete bucket attachments.

Standard

Crane Hoist Line Speed and Power Test Code

1998-07-01

HISTORICAL

J820_199807

This code applies primarily to mobile cranes that lift loads by means of a drum and hoist line mechanism. It can be used to determine the hoist line speed and power of other hoist line mechanisms, if load can be held constant and hoist line travel distance is sufficient for the accuracy of the line speed measurements prescribed.