Search Results

The fuel efficiency improvement of a prototype Driver-Assistive-Truck-Platooning (DATP) system was evaluated using Computational Fluid Dynamics (CFD). The DATP system uses a combination of radar and GPS, integrated active safety systems, and V2V communications to enable regulation of the longitudinal distance between pairs of trucks without acceleration input from the driver in the following truck(s). The V2V linking of active safety systems and synchronized braking promotes increased safety of close following trucks while improving their fuel economy. Vehicle configuration, speed, and separation distance are considered. The objectives of the CFD analysis are to optimize the target separation distance and to determine the overall drag reduction of the platoon. This reduction directly results in fuel economy gains for all cooperating vehicles.

A Computational Fluid Dynamics (CFD) study was conducted on four-vehicle platoons, and the aerodynamic data is then coupled with a high-fidelity truck simulation software (TruckSim) to determine fuel efficiency. Previous studies typically have focused on identical two vehicle platoons, whereas this study accounted for more complex platoon configurations. Heavy duty vehicles (HDVs), both military and commercial, make up a significant percentage of fuel consumption. This study aimed to quantify fuel savings of a platoon consisting of dissimilar trucks and trailers, thus reducing vehicle operational cost. The vehicle platoon featured two M915 trucks and two Peterbilt 579 trucks with dissimilar trailer configurations. An unloaded flatbed trailer, a centered 20 ft shipping container, two 20 ft shipping containers, and a 53 ft box trailer configurations were utilized.

A Cooperative Adaptive Cruise Control (CACC) platooning system was developed and implemented on Class 8 heavy duty trucks. The system allows for longitudinal, or gap spacing, control of the vehicle, while lateral control is maintained by the driver. Many previous aerodynamic studies have shown a reduction in drag force from vehicles traveling in close proximity to each other. This “drafting” effect leads to potential fuel savings for all vehicles in the platoon. Several automated driving and CACC systems have been tested in simulation or closed track settings to evaluate these fuel savings. However, there are only a few examples of potential fuel savings in real on-road or highway environments. This paper provides control performance, fuel economy, lateral offset, and number of neighboring vehicle results of an on-road platoon. The CACC system was implemented on two Peterbilt 579 commercial trucks with unloaded 53’ box trailers.

A Computational Fluid Dynamics (CFD) study was completed to characterize the fuel consumption in terms of the separation distance of a Driver-Assistive-Truck-Platooning (DATP). The DATP system considered utilizes radar and GPS for a redundant range measurement, paired with Vehicle to Vehicle (V2V) communications to enable regulation of the longitudinal distance between the pair of trucks without acceleration input from the rear driver. The linkage of information between the trucks promotes increased safety between the following trucks, while improving their fuel economy. The results from this study are compared to previous works. Preliminary analysis of the system indicated that the fuel economy of both trucks increases dramatically as the separation distance diminishes. Additionally, an SAE Type-II fuel economy test complying with the (1986) SAE J1321 standard was completed to correlate the computational studies.

A truck platooning system was tested using two heavy-duty tractor-trailer trucks on a closed test track to investigate the sensitivity of intentional lateral offsets over a range of intervehicle spacings. The fuel consumption for both trucks in the platoon was measured using the SAE J1321 gravimetric procedure while travelling at 65 mph and loaded to a gross weight of 65,000 lb. In addition, the SAE J1939 instantaneous fuel rate was calibrated against the gravimetric measurements and used as proxy for additional analyses. The testing campaign demonstrated the effects of intervehicle gaps, following-vehicle longitudinal control, and manual lateral control. The new results are compared to previous truck-platooning studies to reinforce the value of the new information and demonstrate similarity to past trends. Fuel savings for the following vehicle was observed to exceed 10% at closer following distances.

A two-truck platoon based on a prototype cooperative adaptive cruise control (CACC) system was tested on a closed test track in a variety of realistic traffic and transient operating scenarios - conditions that truck platoons are likely to face on real highways. The fuel consumption for both trucks in the platoon was measured using the SAE J1321 gravimetric procedure as well as calibrated J1939 instantaneous fuel rate, serving as proxies to evaluate the impact of aerodynamic drag reduction under constant-speed conditions. These measurements demonstrate the effects of: the presence of a multiple-passenger-vehicle pattern ahead of and adjacent to the platoon, cut-in and cut-out manoeuvres by other vehicles, transient traffic, the use of mismatched platooned vehicles (van trailer mixed with flatbed trailer), and the platoon following another truck with adaptive cruise control (ACC).