Search Results

This paper will identify the role of the engineer in the Total Quality Management movement. In the latter 1980's quality and reliability were identified as being a result of good business practices, rather than only being effected by manufacturing and design systems. In the past, engineers were given total design responsibility with little or no control once the design left their hands. Product cost analysis recently identified approximately 65% of product cost comes from areas which the engineer cannot control. This paper will show how the skills of the engineer are being integrated into the total business environment through a structured planning system, resulting in products and services with customer focus. Quality and reliability in the 1990's will be a result of this well defined and applied business system.

The potential contributions of acoustical technology to manufacturing companies pervade nearly all of its functions from marketing and product planning to design engineering and quality control. Despite this, however, companies generally feel uneasy when they embark on programs to use acoustics in their operations because the technology seems complicated and somehow harder to “get a handle on” than it is in other cases. But the issues of product sound, and the benefits of acoustics on a diagnostic tool are too important to ignore, so in this paper we discuss these issues in a “20 questions” format to help planners, engineers and managers as they proceed to implement acoustical technology in their organizations.

This paper describes the after-treatment technology that could be used to meet a future BS-VII standard, considering close-coupled SCR (cc-SCR) to help start NOx conversion earlier. Both active (Cu/Fe-SCR based) and passive (V-SCR based) systems have the potential to meet emission limits. V-SCR may be considered in the rear position because V-SCR shows a fast response with very low N2O formation. Next-gen V-SCR technology shows significantly improved performance and durability closer to Cu-SCR. The steady-state NOx conversions over Next-Gen V-SCR were better than BS-VI V-SCR in both fresh and aged-580°C/100h conditions. High durability was also observed after engine aging of 1000h (WHTC + high load). Another big challenge in BS VII could be the PN10 requirement. With enhanced filtration coating (EFC) technology, PN emissions drop drastically in comparison to Euro VI reference without EFC to meet a future BS VII.

The objective of this paper is to demonstrate that frequency domain methods for calculating structural response and fatigue damage can be more widely applicable than previously thought. This will be demonstrated by comparing results of time domain vs. frequency domain approaches for a series of fatigue/durability problems with increasing complexity. These problems involve both static and dynamic behavior. Also, both single input and multiple correlated inputs are considered. And most important of all, a variety of non-stationary loading types have been used. All of the example problems investigated are typically found in the automotive industry, with measured loads from the field or from the proving ground.

Frequency domain testing has had limited use in the past for durability evaluations of automotive components. Recent advances and new perspectives now make it a viable option. Using frequency domain testing for components, test times can be greatly reduced, resulting in considerable savings of time, money, and resources. Quality can be built into the component, thus making real-time subsystem and full vehicle testing and development more meaningful. Time domain testing historically started with block cycle histogram tests. Improved capabilities of computers, controllers, math procedures, and algorithms have led to real time simulation in the laboratory. Real time simulation is a time domain technique for duplicating real world environments using computer controlled multi-axial load inputs. It contains all phase information as in the recorded proving ground data. However, normal equipment limitations prevent the operation at higher frequencies.

In today's world economic environment, the probability for increased product opportunity for any given company is diminishing because we are faced with a maturing world marketplace. Much of the demand for product will come from users who replace existing products with improved and advanced state-of-the-art products that can perform utilitarian services at a more efficient and economic cost. Although advanced design concepts and improved application of engineering principles have resulted in more reliable and longer life product, there still remains a strong need to keep these products performing to meet the level of user expectation.

This paper outlines what a large company is doing on a corporate staff basis to help combat Product Liability problems. Eaton Corporation is multi-national and serves a variety of markets. The extensive and complex line of products dictates the need for a well organized, corporate Product Assurance Program. The program is made up of five thrusts: 1) Corporate Policy, 2) Guidelines, 3) Divisional Committees, 4) Surveys and 5) Training. Utilizing a product development project, the implementation of several elements of Product Quality Assurance are explained. The program was designed for flexibility and emphasizes the chairman's motto to “DO IT RIGHT THE FIRST TIME, EVERY TIME.”

Environmental concerns and government regulations are factors that have led to an increased focus on fuel economy in the automotive industry. This paper identifies a method used to improve the efficiency of a front-wheel-drive (FWD) automatic transmission. In order to create improvements in large complex systems, it is key to have a large scope, to include as much of the system as possible. The approach taken in this work was to use Design for Six Sigma (DFSS) methodology. This was done to optimize as many of the front-wheel-drive transmission components as possible to increase robustness and efficiency. A focus of robustness, or consistency in torque transformation, is as important as the value of efficiency itself, because of the huge range of usage conditions. Therefore, it was necessary to find a solution of the best transmission component settings that would not depend on specific usage conditions such as temperatures, system pressures, or gear ratio.

With the growing complexity and integration of systems as satellites, automobiles, aircrafts, turbines, power controls and traffic controls, as prescribed by SAE-ARP-4754A Standard, the time de-synchronization can cause serious or even catastrophic failures. Time synchronization is a very important aspect to achieve high performance, reliability and determinism in networked control systems. Such systems operate in a real time distributed environment which frequently requires a consistent time view among different devices, levels and granularities. So, to guarantee high performance, reliability and determinism it is required a performance evaluation of time synchronization of the overall system. This time synchronization performance evaluation can be done in different ways, as experiments and/or model and simulation.

A method has been developed which allows prediction of the field performance of structural components based on prototype vehicle test procedures and results. Component designs can then be optimized by selecting prototype durability test objectives which more accurately reflect actual field usage. This procedure, which is based on fatigue damage calculations from component strain histories, has been successfully applied to non-safety related body, frame and suspension structural components of light trucks and vans.

A new hydraulic system was developed using off-the-shelf components to gain lower effort steering, push-button machine function controls, and improved reliability. The ability to alter or add to the system (flexibility) is a requirement. The hydraulic control requirements for this vehicle are similar to other self-propelled machines. The inherent flexibility of this system may make it adaptable, at least in part, to other vehicles.

In this paper, a simplified and systematic approach to integrate reliability and durability aspects in design process is presented. A six step process is explained with the help of examples. Two alternatives for gathering means and standard deviations for key parameters are discussed. First a DOE approach based on orthogonal arrays is presented. Second approach is based on Taylor Series expansion. An example of beam design is solved with both of these approaches. The Second example also considers the degradation with time in service.

Heavy commercial vehicles constitute the dominant form of inland freight transport. There is a strong interest in making such vehicles autonomous (self-driving), in order to improve safety and the economics of fleet operation. Autonomy concerns affect a number of key systems within the vehicle. One such key system is brakes, which need to remain continuously available throughout vehicle operation. This paper presents a fail-operational functional brake architecture for autonomous heavy commercial vehicles. The architecture is based on a reconfiguration of the existing brake systems in a typical vehicle, in order to attain dynamic, diversified redundancy along with desired brake performance. Specifically, the parking brake is modified to act as a secondary brake with capabilities for monitoring and intervention of the primary brake system.

The reproduction of the vehicle motion is a crucial element of accident reconstruction. Apart from the position of the center of gravity in an inertial coordinate system, the vehicle heading plays an important role. The heading is the sum of the yaw angle and the vehicle body side slip angle. In standard vehicles, the yaw angle can be determined using the yaw rate sensor and the wheel speeds. However, the yaw rate sensor is often subject to temperature drift. The wheel speed signals are forged at low speeds or due to slip. These errors result in significant deviations of reconstructed and real vehicle heading. Therefore, an intelligent combination of these signals is required. This paper describes a fuzzy system which is capable to increase the accuracy of yaw angle calculation by means of fuzzy logic. Before the data is applied to the fuzzy system, it is preprocessed to ensure the accuracy of the fuzzy system inputs.

This paper presents some of the history of the Spacemetal process development; a discussion of the core forming machine, a description of the welder where corrugated core and facing sheets are joined; the quality control process employed for inspecting the finished product; and some of the material properties and applications. FOREWORD Development of a production process and the machines for fabrication of a resistance welded steel sandwich was made by Missile Division, North American Aviation, Inc. Development was carried forward under contract AF 33(600)-26154 from the Manufacturing Methods Branch, Industrial Resources Division of the Air Materiel Command USAF.

Highway and roadway surface measurement is a practice that has been ongoing for decades now. This sort of measurement is intended to ensure a safe level of road perturbances. The measurement may be conducted by a slow moving apparatus directly measuring the elevation of the road, at varying distance intervals, to obtain a road profile, with varying degrees of resolution. An alternate means is to measure the surface roughness at highway speeds using accelerometers coupled with high speed distance measurements, such as laser sensors. Vehicles out rigged with such a system are termed inertial profilers. This type of inertial measurement provides a sort of filtered roadway profile. Much research has been conducted on the analysis of highway roughness, and the associated metrics involved. In many instances, it is desirable to maintain an off-road course such that the course will provide sufficient challenges to a vehicle during durability testing.

Liquid Crystal Display is in the process of achieving the supreme position as an automotive instrument panel; it will replace all other existing automotive displays on dashboards. However, a number of problems on technical support remain to be solved. Focused the most among them is the strong demand of a highly reliable connection method. The new connection technique by soldering was presented in the previous paper. This paper describes the reliability and fabrication process of the new connection and its application to Driver IC on flexible P.C.B. and Chip on Glass instrument panels.

The paper covers a new generation of manual transmissions for light and medium-duty trucks, vans and buses, initially introduced in a 5-speed version. The product reflects levels of driving comforts which are new to this class of vehicle worldwide with respect to shiftability, shift feel, noise emission, efficiency and durability.

Reliability research in hybrid ceramic bearings involves life testing of hybrid bearings and ceramic specimens. New materials for bearings like advanced ceramics have emerged for evaluation in recent years. In fatigue testing to determine the stress-life relationship, the number of sample size in life testing can be limited by consideration of cost and testing time. In the testing of ceramics, some researchers have relied on the use of a stepwise multiple loading approach to increase the failure data points. In this paper, a maximum likelihood method is applied to test data with multiple loads to estimate the stress-life exponent. This method treats the data at different loads or steps at once. Test data from three fatigue experiments using silicon nitride materials have been analyzed to obtain the stress-life exponents. Also, Weibull plots of the ‘equivalent lives' have been presented for all test specimens tested at different loads and load steps.

A novel method was developed to predict the free-stream velocity experienced by a traveling vehicle based on track-side anemometric measurements. The end objective of this research was to enhance the reliability of the prediction of free-stream conditions in order to improve the accuracy of aerodynamic drag coefficient (CD) assessments from track tests of surface vehicles. Although the technique was applied to heavy-duty vehicles in the present work, it is equally applicable to any vehicle type. The proposed method is based on Taylor’s hypothesis, a principle applied in fluid mechanics to convert temporal signals into the spatial domain. It considers that the turbulent wind velocity fluctuations measured at one point are due to the "passage of an unchanging pattern of turbulent motion over the point". The method is applied to predict the wind velocity that the vehicle will experience as it encounters a wind pattern detected earlier by an anemometer located upwind.