Refine Your Search

Date

Date

Topic

Topic

Interiors, Cabins, and Cockpits HFTC4, Operator Seating and Ride

Search Results

Viewing 1 to 20 of 39
12Next >Last >>
Sort by title
Standard

CLASSIFICATION OF AGRICULTURAL WHEELED TRACTORS FOR VIBRATION TESTS OF OPERATOR SEATS
1986-01-01
HISTORICAL
J1386_198601
This Recommended Practice defines classes of tractors having similar characteristics which affect the vibration transmitted to the operator through the operator seat. This recommended practice establishes input data parameters for conducting operator seat vibration tests for various classifications for agricultural wheeled tractors. The classification is intended to aid in the selection of a seat for a specific tractor model and to reduce the amount of testing necessary to determine compliance with applicable standards and/or recommendations. Classification is based on basic configuration and total mass. Instrumentation and measurement procedures are specified in SAE J1013 JAN80. Test procedures are defined in SAE J1384. This document is in compliance with DIS 5007 adopted by ISO/TC23/SC3 October 1984 in Madrid, Spain.
Standard

DETERMINING OPERATOR SEAT LOCATION ON OFF-ROAD WORK MACHINES
1980-01-01
HISTORICAL
J1163_198001
This recommended practice establishes procedures for determining seat location relative to basic datum points or planes on agricultural and construction machines. Alternate procedures are specified including an H-Point procedure to evaluate compliance with standards or regulations related to the H-Point, determined with the device specified in SAE J826b and a Seat Index Point (SIP) procedure to provide for use of a simplified device. When a specific procedure is not designated, the H-Point and SIP are equivalent and can be used interchangeably within normal measurement tolerances.
Standard

DETERMINING SEAT INDEX POINT
1991-06-01
HISTORICAL
J1163_199106
This SAE Standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat.
Standard

DETERMINING SEAT INDEX POINT
1997-08-01
HISTORICAL
J1163_199708
This SAE Standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat.
Standard

DYNAMIC DURABILITY TESTING OF SEAT CUSHIONS FOR OFF-ROAD WORK MACHINES
1995-01-01
HISTORICAL
J1454_199501
This SAE Standard describes a laboratory test procedure for comparatively evaluating the durability and fatigue life qualities of a complete seat cushion by submitting the seating surface of the cushion to repetitive compressive and rotational loading with a simulated human buttocks.
Standard

Determining Seat Index Point
2006-12-04
HISTORICAL
J1163_200612
This SAE Standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat.
Standard

Determining Seat Index Point
2016-08-02
CURRENT
J1163_201608
This SAE Standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat.
Standard

Determining Seat Index Point
2012-05-17
HISTORICAL
J1163_201205
This SAE Standard specifies a method and the device for use in determining the position of the Seat Index Point (SIP) for any kind of seat.
Standard

Development of a Frequency Weighted Portable Ride Meter
1987-01-30
CURRENT
J1225_198701
The purpose of this report is to record the activities and recommendations of the Ride Meter Task Force assigned by the chairman of the SAE Joint Seating Subcommittee to determine availability of instrumentation to measure operator ride on mobile equipment. The desired characteristics of the meter included relatively low cost, easy to operate, highly portable, and sufficiently rugged to withstand the vibration levels encountered on agricultural or construction machines. It is recognized that a ride meter type instrument with a single numerical output provides only approximate indication of ride vibration quality, but is useful for general field evaluation or overall ride comparisons. A narrow band analysis of the vibration frequency spectrum is recommended for more accurate and complete results.
Standard

Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines
2006-05-31
HISTORICAL
J1454_200605
This SAE Standard describes a laboratory test procedure for comparatively evaluating the durability and fatigue life qualities of a complete seat cushion by submitting the seating surface of the cushion to repetitive compressive and rotational loading with a simulated human buttocks.
Standard

Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines
2012-05-17
HISTORICAL
J1454_201205
This SAE Standard describes a laboratory test procedure for comparatively evaluating the durability and fatigue life qualities of a complete seat cushion by submitting the seating surface of the cushion to repetitive compressive and rotational loading with a simulated human buttocks.
Standard

Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines
2023-02-14
CURRENT
J1454_202302
This SAE Standard describes a laboratory test procedure for comparatively evaluating the durability and fatigue life qualities of a complete seat cushion by submitting the seating surface of the cushion to repetitive compressive and rotational loading with a simulated human buttocks.
Standard

Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines
2017-08-08
HISTORICAL
J1454_201708
This SAE Standard describes a laboratory test procedure for comparatively evaluating the durability and fatigue life qualities of a complete seat cushion by submitting the seating surface of the cushion to repetitive compressive and rotational loading with a simulated human buttocks.
Standard

FORCE-DEFLECTION MEASUREMENTS OF CUSHIONED COMPONENTS OF SEATS FOR OFF-ROAD WORK MACHINES
1993-09-01
HISTORICAL
J1051_199309
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116 JUN86. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2008-04-11
HISTORICAL
J1051_200804
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2002-12-18
HISTORICAL
J1051_200212
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
12Next >Last >>
X