Search Results

The goal of the present study was to develop a new legform impactor that accurately represents both the impact force (i.e., force between the leg and impacting mass)and leg kinematics in lateral impacts simulating car-pedestrian accidents. In its development we utilized the knee joint of the pedestrian dummy called Polar-2 (HONDA R&D) in which the cruciate and collateral ligaments are represented by means of springs and cables, the geometry of the femoral condyles is simplified using ellipsoidal surfaces, and the tibial meniscus is represented by an elastomeric pad. The impactor was evaluated by comparing its responses with published experimental results obtained using postmortem human subjects (PMHS). The evaluation was done under two conditions: 1)impact point near the ankle area (bending tests),and 2)impact point 84 mm below the knee joint center (shearing tests). Two impact speeds were used: 5.56 m/s and 11.11 m/s.

This study aimed to clarify the relationship between truck-pedestrian crash impact velocity and the risks of serious injury and fatality to pedestrians. We used micro and macro truck-pedestrian accident data from the Japanese Institute for Traffic Accident Research and Data Analysis (ITARDA) database. We classified vehicle type into five categories: heavy-duty trucks (gross vehicle weight [GVW] ≥11 × 103 kg [11 tons (t)], medium-duty trucks (5 × 103 kg [5 t] ≤ GVW < 11 × 103 kg [11 t]), light-duty trucks (GVW <5 × 103 kg [5 t]), box vans, and sedans. The fatality risk was ≤5% for light-duty trucks, box vans, and sedans at impact velocities ≤ 30 km/h and for medium-duty trucks at impact velocities ≤20 km/h. The fatality risk was ≤10% for heavy-duty trucks at impact velocities ≤10 km/h. Thus, fatality risk appears strongly associated with vehicle class.

This study aimed to clarify the relationship between truck–cyclist collision impact velocity and the serious-injury and fatality risks to cyclists, and to investigate the effects of road type and driving scenario on the frequency of cyclist fatalities due to collisions with vehicles. We used micro and macro truck–cyclist collision data from the Japanese Institute for Traffic Accident Research and Data Analysis (ITARDA) database. We classified vehicle type into five categories: heavy-duty trucks (gross vehicle weight [GVW] ≥11 × 103 kg [11 tons (t)], medium-duty trucks (5 × 103 kg [5 t] ≤ GVW < 11 × 103 kg [11 t]), light-duty trucks (GVW <5 × 103 kg [5 t]), box vans, and sedans. The fatality risk was ≤5% for light-duty trucks, box vans, and sedans at impact velocities ≤40 km/h and for medium-duty trucks at impact velocities ≤30 km/h. The fatality risk was 6% for heavy-duty trucks at impact velocities ≤10 km/h.

In nonfatal car-pedestrian accidents, lower extremities are the most commonly injured body parts. The test device used to evaluate the car-front aggressiveness regarding the risk of these injuries is a legform impactor. Injury-related factors causing AIS 2+ injury in the human lower leg when exposed to a lateral impact representing a pedestrian accident should be identified. One of the test devices commonly used to evaluate the risk is the legform impactor developed by the Transport Research Laboratory (TRL). However, information about the biofidelity of this impactor and leg injury tolerance curves is lacking.

In the current Japanese and European side impact regulation, occupant protection is evaluated based on anthropomorphic test device (hereafter referred to as the more commonly used term “dummy”) measurements recorded in a stationary car impacted by a moving deformable barrier (MDB). In order to validate and improve the side impact test procedures of the regulation and the associated new car assessment program, it is necessary to compare the side impact test procedure with car-to-car side impact tests conducted in various conditions. In this research, a series of car-to-car side impact tests using a small sedan as the target vehicle was conducted as follows: (1) A striking car impacted against the stationary car at 50 km/h at an impact angle of 90 degrees. (2) A 1BOX vehicle impacted the stationary car at 50 km/h at an impact angle of 90 degrees. (3) Both cars were moving, and the striking car impacted the struck car at an impact angle of 90 degrees.

Evaluation of car front aggressiveness in car-pedestrian accidents is typically done using sub-system tests. Three such tests have been proposed by EEVC/WG17: 1) the legform to bumper test, 2) the upper legform to bonnet leading edge test, and 3) the headform to bonnet top test. These tests were developed to evaluate performance of the car structure at car to pedestrian impact speed of 11.1 m/s (40 km/h), and each of them has its own impactor, impact conditions and injury criteria. However, it has not been determined yet to what extent the EEVC sub-system tests represent real-world pedestrian accidents. Therefore, there are two objectives of this study. First, to clarify the differences between the injury-related responses of full-scale pedestrian dummy and results of sub-system tests obtained under impact conditions simulating car-to-pedestrian accidents. Second, to propose modifications of current sub-system test methods. In the present study, the Polar (Honda R&D) dummy was used.

In Japan, where vehicles drive on the left side of the road, pedestrian fatal accidents caused by vehicles traveling at speeds of less than or equal to 20 km/h, occur most frequently when a vehicle is turning right. The objective of the present study is to clarify the driving behavior in terms of eye glances and driver speeds when drivers of two different types of vehicles turn right at an intersection on a left-hand traffic road. We experimentally investigated the drivers’ gaze, vehicle speed, and distance on the vehicle traveling trajectory from the vehicle to the pedestrian crossing line, using a sedan and a truck with a gross vehicle weight of < 7.5 tons (a light-duty truck) during right-turn maneuver. We considered four different conditions: no pedestrian dummy (No-P), right pedestrian dummy (R-P), left pedestrian dummy (L-P), and right and left pedestrian dummies (RL-P).

SAE International defines six levels of autonomous driving system, four of which include a change of control from the system to the driver in certain conditions. When vehicle control changes from the system to a human driver, a safe transition time is necessary. The present study focuses on level 3 automation, in which the system controls driving in ordinary conditions, but the human driver is expected to intervene in emergency situations. The aim of this study was to investigate the relationship between driver posture and transition time. Driver posture included four components: backrest angle, seat position, foot position, and arm position. These were adjusted to investigate a total of 30 posture patterns. In addition, the situation in which the driver was not watching the road, but instead using a tablet computer was investigated. The driver’s braking and steering reaction times were measured for a highway-driving scenario in which a truck dropped cargo in front of the vehicle.

Fatal injuries suffered by cyclists in vehicle-versus-cyclist accidents are investigated to provide information for the introduction of safety countermeasures. We analyzed characteristics of cyclist injuries in real fatal accidents and compared them with severity levels of head injury in impact tests against a road surface. In the accident analyses, we investigated the main body regions whose injuries led to fatalities using a macro vehicle-cyclist accident database of the Institute for Traffic Accident Research and Data Analysis of Japan. Using data from 2009 to 2013, we investigated the frequency of cyclist fatalities by gender, age group, vehicle speed, and the source of fatal head injury (impact with the vehicle or road surface). Results indicated that head injuries are the most common cause of cyclist fatalities in car-cyclist accidents.

The number of traffic deaths in Japan was 4,612 in 2011. Looking at the road accident fatalities, it revealed that pedestrians accounted for the highest number in 2011 (1,686, 36.6%). To develop safety countermeasures to decrease the severity of injuries and to reduce the number of deaths in traffic accidents, the detailed characteristics of pedestrian injury in vehicle-to-pedestrian crashes are necessary. The purpose of this study is to understand the scenarios of vehicle accidents in which pedestrians suffer fatal injuries. In the present study, we investigated the characteristics of pedestrian injuries in fatal crashes from accident analyses and compared them to head injury severity levels in impact tests against a road pavement and vehicle contact surfaces.

The main objective of the present study is to determine experimentally the injury patterns and response of the human thigh in lateral impacts simulating more closely the real impact conditions in car-pedestrian accidents. We conducted in-vitro experiments on thirteen thighs of eight completely intact Post Mortem Human Subjects (PMHSs). The thigh was hit by a ram at a speed of 35 km/h at the mid-shaft of the femur in each completely intact PMHS. Since the effect of cumulative injuries should be avoided, each thigh was impacted only once. Three impact energies were used; 450J, 600J and 700J. The PMHS motion was not constrained so as to simulate the walking posture of a pedestrian. We analyzed the peak values of the impact force of the ram and the femur acceleration. Injury was assessed by dissecting the lower extremities.

Numerous studies of pelvic tolerance to lateral impact aimed at protecting car occupants have been conducted on Post Mortem Human Subjects (PMHSs) in a sitting posture. However, it remains unclear whether or not the results of these studies are relevant when evaluating the injury risk to walking pedestrians impacted by a car. Therefore, the first objective of the present study is to determine the injury tolerance and to describe the injury mechanisms of the human pelvis in lateral impacts simulating car-pedestrian accidents. The second objective is to obtain data for validation of mathematical models of the pelvis. In-vitro experiments were conducted on twelve PMHSs in simulated standing position. The trochanter of each PMHS was hit by a ram at speed of 32 km/h, and the pelvic motion was constrained by a bolt. This type of pelvic constraint is difficult to simulate in mathematical models.

The number of traffic deaths in Japan was 4,914 in 2009. Since the head was the most common site of injury in traffic accidents (2,302, 47%), traumatic brain injury causes the fatalities in these accidents. The aim of the present study was to quantify micro injuries in the animal brain for gaining insight and understanding of the human brain injury tolerance. Using porcine brain matter, in vitro stress relaxation experiments and in vivo impact experiments were conducted. In both experiments, the distribution of the damage ratio of the transverse to longitudinal length of cells, hereafter, referred to as an aspect ratio, in the brain matter under loading was examined. In the in vitro stress relaxation experiments, specimens were compressed vertically with a compression velocity of 1 mm/s, and the displacement was held for 140 sec when the compression strain reached the target strain. In the experiments, there were five categories of compression strain: 10, 20, 30, 40, and 50 percent.

Accident data show that the injury risks to children seated in child restraint systems (CRSs) are higher in side collisions than any other type of collision. To investigate child injury in the CRS in a side impact, it is necessary to understand the occupant responses in car-to-car crash tests. In this research, a series of full car side impact tests based on the ECE R95 test procedure was conducted. In the vehicle's struck-side rear seat location, a Q3s three-year-old child dummy was seated in a forward facing (FF) CRS, and a CRABI six-month-old (6MO) infant dummy was seated in a rear facing (RF) CRS and also was placed in car-bed restraint. In the non-struck side rear seat location, the RF CRSs also were installed. In addition to testing the CRSs installed by a seatbelt, an ISOFIX FF CRS and an ISOFIX RF CRS were tested. For the evaluations, occupant kinematic behavior and injury measures were compared.

Vehicles that start moving from a stationary position can cause fatal traffic accidents involving pedestrians. Ultrasonic sensors installed in the vehicle front are an active technology designed to alert drivers to the presence of stationary objects such as rigid walls in front of their vehicles. However, the ability of such sensors to detect humans has not yet been established. Therefore, this study aims to ascertain whether these sensor systems can successfully detect humans. First, we conducted experiments using four vehicles equipped with ultrasonic sensor systems for vehicle-forward moving-off maneuvers and investigated the detection distances between the vehicles and a pipe (1 m long and having a diameter of 75 mm), child, adult female, or adult male. The detections of human volunteers were evaluated under two different conditions: front-facing and side-facing toward the front of each vehicle.

The objective of this research is to clarify the significant factors causing AIS 2+ femur or pelvis pedestrian injury, and to understand whether the current EEVC upper legform test reflects real world pedestrian accidents. An in-depth case study was conducted using the selected 82 pedestrian accident cases from 1987 to 1997 in the data base of Japan Automobile Research Institute (JARI) and Institute for Traffic Accident Research and Data Analysis (ITARDA). The results indicate the significant factors were the bonnet leading edge height, the vehicle registration year and the pedestrian age. The bumper lead was not a significant factor. However, the test condition of the EEVC upper legform test depends on the bumper lead and the bonnet leading edge height. The current test condition of the EEVC upper legform test should be reconsidered excluding the bumper lead.

The number of traffic deaths in Japan was 4,863 in 2010. Pedestrians account for the highest number (1,714, 35%), and vehicle occupants the second highest (1,602, 33%). Pedestrian protection is a key countermeasure to reduce casualties in traffic accidents. A striking vehicle's impact velocity could be considered a parameter influencing the severity of injury and possibility of death in pedestrian crashes. A collision damage mitigation braking system (CDMBS) using a sensor to detect pedestrians could be effective for reducing the vehicle/pedestrian impact velocity. Currently in Japan, cars equipped with the CDMBS also have vision sensors such as a stereo camera for pedestrian detection. However, the ability of vision sensors in production cars to properly detect pedestrians has not yet been established. The effect of reducing impact velocity on the pedestrian injury risk has also not been determined.

The first purpose of this study is to clarify the relation between the car impact velocity and pedestrian injury severity or mortality risk. We investigated the frequency of serious injuries and fatalities of pedestrians using vehicle-pedestrian accident data from the database of the Institute for Traffic Accident Research and Data Analysis (ITARDA) in Japan. The vehicle types considered are sedans, minivans, and box vans (ordinary automobiles) and light passenger cars and light cargo vans (light automobiles). The results revealed that a 10-km/h reduction in impact velocity could mitigate severe pedestrian injuries in cases involving impact velocities of 40 km/h or more for the five vehicle types analyzed. Specifically, if the impact velocity was 30 km/h or less, the frequency of serious injuries was less than 27% and the frequency of fatalities was less than 5% for the five vehicle types.

The main purpose of this study is to define the relationship between the car impact velocity and serious injury risk or fatality risk of cyclists. The authors investigated the risks of serious injuries and fatalities of cyclists using vehicle-cyclist accident data from the database of the Institute for Traffic Accident Research and Data Analysis (ITARDA) in Japan. The vehicle types considered are sedans, mini vans, box vans, light passenger cars and light cargo vans. The results revealed that a 10-km/h decrease in the impact velocity could reduce the severe injury risk and fatality risk for impact velocities of 40 km/h or higher. Specifically, when the impact velocity was less than or equal to 30 km/h, the serious injury risks were less than 21% and the fatality risks were less than or equal to 1% for the above listed vehicle types.

The main objective of this study is to determine the damage tolerance and to describe the damage mechanisms of the extended human knee when it is exposed to lateral impact loads in pedestrian accidents, particularly those that occur at high velocity. An experimental method for assessing the damage tolerance of the knee region to loads acting at the extended lower extremity was developed. In-Vitro experiments with human subjects were conducted where only the purest possible shearing deformation or the purest possible bending deformation affected the knee region at the time. Ten experiments at a velocity level of 40 km/h were performed in a shearing and a bending setup, respectively. The peak values of the shearing force and the bending moment related to the damage of knee ligaments and bone fractures were calculated at knee joint level. Damages were assessed by dissecting the lower extremity.