Search Results

This paper examines the use of additive manufacturing and the composite SLS material Windform XT to build a 2U CubeSat with an integrated Micro-Electro-Mechanical System (MEMS) propulsion for space flight. The flight of this satellite is intended to examine and test the use of additive manufacturing utilizing Windform XT to produced CubeSat's, as well as certifying a warm gas propulsion subsystems with a magnetic stabilization for CubeSat orbital altitude adjustment. ...The flight of this satellite is intended to examine and test the use of additive manufacturing utilizing Windform XT to produced CubeSat's, as well as certifying a warm gas propulsion subsystems with a magnetic stabilization for CubeSat orbital altitude adjustment. ...The flight of this satellite is intended to examine and test the use of additive manufacturing utilizing Windform XT to produced CubeSat's, as well as certifying a warm gas propulsion subsystems with a magnetic stabilization for CubeSat orbital altitude adjustment. The RAMPART project uses additive manufacturing techniques to build the satellite structures, propellant tanks, printed circuit board cages, solar panel frames, antenna deployment mechanisms, etc. at a fraction of the time of current methods.

The Unipod separation system successfully flown first time in PSLV C56 Mission for the deployment of three foreign satellites namely Nulion, Galassia-2 and SCOOB II. CubeSat separation system consists of a structure housing the satellite, Holding and release mechanism (HDRM), rattling arresting mechanism, satellite ejection mechanism and movement arresting/ locking mechanism. ...The system was designed and developed for accommodating four satellites with a maximum mass of 6.0 kg, meeting the CubeSat Design Specification (CDS). Wire fusing system is used as HDRM. Helical compression spring with pusher plate is used for ejecting the satellite.

NASA Science Mission Directorate officials in Washington are funding three new projects selected from a pool of 25 received in response to the NASA Earth Science Technology Office’s (ESTO’s) solicitation for the In-Space Validation of Earth Science Technologies (InVEST) program element A.49 of ROSES (Research Opportunities in Space and Earth Sciences) 2017, supporting the Earth Science Division (Solicitation NNH17ZDA001N).

Kepler Communications, Inc.’s (Kepler’s) TARS six-unit cubesat – the company’s third satellite scheduled for launch later this year – will feature an innovative smart radiator device (SRD) designed to significantly optimize heat dissipation on communication satellites where environmental conditions have a big impact on transmission signals.

Overcoming Machining Productivity Challenges with Aerospace Components Why the Turbomachinery Industry is Increasingly Bullish on Additive Manufacturing 3D-printed metal-alloys are answering critical needs for high fluid flow, high-pressure parts. Airborne Inspection Sensor Evolves with LiDAR, Mid-IR and Artificial Intelligence Air Force eVTOL Research and Development Programs Make Remote Pilot Progress Creating a Digital Gateway for RF Domain Will Advance Designs That Meet DoD Initiatives Understanding the Unique RF Interconnect Requirements for Ultra-Demanding Hypersonic Missile and Satellite Applications ADS-B Classification Using Multivariate Long Short-Term Memory This analysis extends previous research that used long short-term memory-fully convolutional networks to identify aircraft engine types from publicly available automatic dependent surveillance-broadcast (ADS-B) data.

Developing Object Detection Systems for Autonomous Underwater Vehicles Developing Thermoplastic Composites for Use in Commercial Aircraft An Automated System for Multi-Physics Modeling Taking the Tactical Cloud with You Small Form Factor, Modular Data Centers at the Edge of the Battlefield Remanufacturing Reimagined How Selective Electroplating Extends Service Life and Reduces the Cost of Aerospace Components Satellite Paves the Way for Improved Storm Tracking Solar-Powered Satellite Hardware in Orbit Impact of Satellite Intelligence, Surveillance and Reconnaissance on Modern Naval Operations Determining whether afloat availability of satellite ISR, a technology that is relatively new, fundamentally changed naval operations and if so, to what degree. 3D Data Acquisition Platform for Human Activity Understanding Implementing motion capture devices, 3D vision sensors, and EMG sensors to cross validate multi-modality data acquisition and address fundamental research problems involving the representation and invariant description of 3D data, human motion modeling and applications of human activity analysis, and computational optimization of large-scale 3D data.

On-Orbit Satellite Refueling Flow Measurement The Path from Concept to Operational Status Radiation Tolerant "Smart Backplanes" for Spacecraft Avionics Using Heat Pipes to Cool Embedded Computers Electronically Dimmable Aircraft Windows How do you block the light of the sun? Eliminating Electrical Arcing in Satellite Systems NASA Miniaturizes Century-Old Radio Sounder Technology Developing an Airborne Optical Systems Testbed (AOSTB) New Class of Excimer-Pumped Atomic Lasers (XPALS) Research demonstrates the viability of an atomic laser having a quantum efficiency greater than one. Hydrodynamic Drag Force Measurement of a Functionalized Surface Exhibiting Superhydrophobic Properties Comparing the skin friction drag effects of a superhydrophobic flat plate to an untreated flat plate of the same material and geometry.

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV) Using Thermoplastics in Aerospace Applications In-Flight Real-Time Avionics Adaptation Using Turbine Flow Meters for Aerospace Test and Measurement Applications Communicating from Space: The Front End of Multiscale Modeling Laser-Based System Could Expand Space-to-Ground Communication Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section Research could lead to development of a composite material that can be processed at a low temperature and still be used at 1000°F. Permeation Tests on Polypropylene Fiber Materials Study attempts to determine if polypropylene nanofiber materials can be used in air filtration systems to remove toxic vapors. Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison Ensuring consistent test methods could reduce the risk of head injuries.

The Japan Aerospace Exploration Agency (JAXA) H-IIB Launch Vehicle No. 7 lifted off from the Tanegashima Space Center in Japan at 2:54:27 Japan Standard Time (JST) on September 23, carrying the KOUNOTORI7 (HTV7) cargo transporter into orbit to start its journey to the International Space Station (ISS).

U.K. Space Agency officials in Swindon, England, are partnering with Lockheed Martin in Bethesda, Md., to execute several strategic projects to support the U.K. Spaceflight Program, with a goal of building its first commercial spaceport in Scotland and achieving its first vertical space launch in the early 2020s.

Air Caster Technology Safeguard Satellites During Assembly and Testing Operational Considerations for High-Reliability Interconnects in Military and Aerospace Applications Understanding Fiber Optic Transceiver Design and Test Rules Acceleration Resistant HiK Heat Spreader Shape-Shifting Origami Could Help Antenna Systems Adapt On-the-Fly NASA Eyes GPS at the Moon for Artemis Missions Spatiotemporal Imaging Exploiting Structured Sparsity Overcoming the conventional limits of spatiotemporal imaging by applying compressed sensing and sparse representations to reduce the amount of data acquired while maintaining high image resolution.

SaraniaSat, an aerospace startup in Los Angeles, won a three-year, $5.1 million NASA In-Space Validation of Earth Science Technologies (InVEST) contract to test and advance the company’s Hyperspectral Thermal Imager (HyTI), being touted as a unique, disruptive technology for hyperspectral remote sensing, a technology also known as imaging spectroscopy used to detect and identify minerals, vegetation, and manmade materials.

With two successful years of 3D printing hardware for both NASA and the U.S. National Laboratory onboard ISS, MIS plans to incorporate capabilities to allow operators aboard ISS to print with stronger, more complex materials such as metals, composites, and carbon nanotube-doped materials.

Cedar Park, Texas-based Firefly Aerospace, Inc. has reached an agreement with Space Florida – the state’s aerospace economic development agency – to establish a facility at Cape Canaveral Spaceport. Through the agreement, Firefly, a spacecraft and launch vehicle developer and provider of launch and in-space services, will conduct launch operations at Cape Canaveral’s Space Launch Complex 20 (SLC-20) and create manufacturing facilities at Exploration Park, Florida.