Accurate Cycle Predictions and Calibration Optimization Using a Two-Stage Global Dynamic Model 2017-01-0583

With the introduction in Europe of drive cycles such as RDE and WLTC, transient emissions prediction is more challenging than before for passenger car applications. Transient predictions are used in the calibration optimization process to determine the cumulative cycle emissions for the purpose of meeting objectives and constraints. Predicting emissions such as soot accurately is the most difficult area, because soot emissions rise very steeply during certain transients.

The method described in this paper is an evolution of prediction using a steady state global model. A dynamic model can provide the instantaneous prediction of boost and EGR that a static model cannot. Meanwhile, a static model is more accurate for steady state engine emissions. Combining these two model types allows more accurate prediction of emissions against time. A global dynamic model combines a dynamic model of the engine air path with a static DoE (Design of Experiment) emission model. The dynamic model is constructed using a Volterra series model for the EGR response and a Stochastic Process Model (SPM) for boost pressure. Both models are trained using data collected from APRBS (Amplitude Modulated Pseudo Random Binary Sequences) type tests. The static model is an SPM trained using data collected in a steady state DoE test.

The output of the global dynamic model is an accurate prediction of engine emissions with a drive cycle and calibration as model inputs. The global dynamic model is called during the calibration optimization process and the cycle cumulative results are used to control the constraints and optimize the objectives. This produces final calibration maps ready for immediate vehicle tests without test bed validation, thereby improving the efficiency of the calibration process.