Refine Your Search

Date

Date

Topic

Topic

Fittings

Search Results

Viewing 1 to 20 of 372
123Next >Last >>
Sort by relevance
Standard

PROTECTIVE COATINGS FOR FASTENERS
1996-08-01
HISTORICAL
J1648_199608
Table 1 lists these coatings and their properties so that finish selection can be reasonably made in accordance with known and anticipated fastener assembly applications. ...Application of protective coatings will affect fastener dimensions. This is especially critical for the thread fit of mating parts because the pitch diameter increases by four times the coating thickness. ...This is especially critical for the thread fit of mating parts because the pitch diameter increases by four times the coating thickness. Explanation is covered in Section 5.
Standard

FITTING, ELBOW, 45 DEGREE, STANDARD AND REDUCER, BULKHEAD, FLARELESS
2019-12-09
WIP
AS1010J
(A) Propose Revision To Figure 1 To Show Port #1 Is Per AS4377 Style "S" In Both Cases and General Update (B) Propose revision to add conductive high purity aluminum coating per MIL-DTL-83488 for aluminum alloy fittings. The W code aluminum parts with new finish will be distinguished by new finish code V at the end of part number.
Standard

Metric Wrenches: 6 & 12 Point Flare Nut, Non-distorting
2013-03-18
CURRENT
MA4360A
This SAE Metric Aerospace Standard (MA) covers metric double end flare nut wrenches that are designed with the following requirements: a Non-distorting usage. b Possessing the strength, clearances, and internal wrenching design to be used on hydraulic tube fittings that conform to the requirements of SAE J514. c Transmitting torque to tube fittings without bearing on the apex of fitting wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Hydraulic Tube Fittings
2012-01-06
CURRENT
J514_201201
This SAE Standard covers complete general and dimensional specifications for 37 degree flared and flareless types of hydraulic tube fittings and O-ring plugs. Also included are pipe fittings and adapter unions for use in conjunction with these tube fittings. These fittings are intended for general application in hydraulic systems on industrial equipment and commercial products. These fittings are capable of providing leakproof, full flow connections in hydraulic systems operating at working pressures as specified in Table 1 for respective sections. Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, the values shown in SAE J1065 should not be construed as a guaranteed minimum. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and fitting manufacturer to assure that performance levels will be safe and satisfactory.
123Next >Last >>
X