Search Results

The 2022 COMVEC™ technical program focused on the commercial vehicle industry's crucial topics such as electrification, connectivity, off-highway, cybersecurity, autonomous and more!

The 2022 COMVEC™ technical program focused on the commercial vehicle industry's crucial topics such as electrification, connectivity, off-highway, cybersecurity, autonomous and more!

The 2022 COMVEC™ technical program focused on the commercial vehicle industry's crucial topics such as electrification, connectivity, off-highway, cybersecurity, autonomous and more!

Strategies designed to deal with these challenges differ in the way in which added duties are assigned and cybersecurity topics are integrated into the already existing process steps. Cybersecurity requirements often clash with existing system requirements or established development methods, leading to low acceptance among developers, and introducing the need to have clear policies on how friction between cybersecurity and other fields is handled. ...Cybersecurity requirements often clash with existing system requirements or established development methods, leading to low acceptance among developers, and introducing the need to have clear policies on how friction between cybersecurity and other fields is handled. A cybersecurity development approach is frequently perceived as introducing impediments, that bear the risk of cybersecurity measures receiving a lower priority to reduce inconvenience. ...For an established development process and a team accustomed to this process, adding cybersecurity features to the product initially means inconvenience and reduced productivity without perceivable benefits.

Here, we discuss the On-Board Diagnostic (OBD) regulations for next generation BEV/HEV, its vulnerabilities and cybersecurity threats that come with hacking. We propose three cybersecurity attack detection and defense methods: Cyber-Attack detection algorithm, Time-Based CAN Intrusion Detection Method and, Feistel Cipher Block Method. ...These control methods autonomously diagnose a cybersecurity problem in a vehicle’s onboard system using an OBD interface, such as OBD-II when a fault caused by a cyberattack is detected, All of this is achieved in an internal communication network structure.

The lack of inherent security controls makes traditional Controller Area Network (CAN) buses vulnerable to Machine-In-The-Middle (MitM) cybersecurity attacks. Conventional vehicular MitM attacks involve tampering with the hardware to directly manipulate CAN bus traffic.

In this paper, we outline past, present and future applications of automotive security for engine ECUs. Electronic immobilizers and anti-tuning countermeasures have been used for several years. Recently, OEMs and suppliers are facing more and more powerful attackers, and as a result, have introduced stronger countermeasures based on hardware security. Finally, with the advent of connected cars, it is expected that many things that currently require a physical connection will be done remotely in a near future. This includes remote diagnostics, reprogramming and engine calibration.

In adjusting the data flow, this is an option to increase the cybersecurity for a complete system. This addition to the cybersecurity system provides a clear benefit. ...While this is the traditional application experienced, there are other applications relevant to cybersecurity. As part of the blockchain technology, the nodes are responsible for decision-making.

What standardization is needed to ensure that quantum technologies do not pose an unacceptable risk from an automotive cybersecurity perspective? Click here to access the full SAE EDGETM Research Report portfolio.

This exercise confirms the necessity of a more restrictive cybersecurity posture in automotive peripherals with access to critical systems, in particular VDAs, and especially when such peripherals present a wireless interface.

The VCE Laboratory testbeds are connected with an Amazon Web Services (AWS) cloud-based Cyber-security Labs as a Service (CLaaS) system, which allows students and researchers to access the testbeds from any place that has a secure internet connection. ...VCE students are assigned predefined virtual machines to perform designated cyber-security experiments. The CLaaS system has low administrative overhead associated with experiment setup and management. ...VCE Laboratory CLaaS experiments have been developed for demonstrating man-in-the-middle cyber-security attacks from actual compromised hardware or software connected with the TestCube.

Vehicle cybersecurity consists of internal security and external security. Dedicated security hardware will play an important role in car’s internal and external security communication. ...For certain AURIX MCU consisting of HSM, the experiment result shows that cheaper 32-bit HSM’s AES calculating speed is 25 times of 32-bit main controller, so HSM is an effective choice to realize cybersecurity. After comparing two existing methods that realize secure CAN communication, A Modified SECURE CAN scheme is proposed, and differences of the three schemes are analyzed.

Classic vehicle production had limitations in bringing the driving commands to the actuators for vehicle motion (engine, steering and braking). Steering columns, hydraulic tubes or steel cables needed to be placed between the driver and actuator. Change began with the introduction of e-gas systems. Mechanical cables were replaced by thin, electric signal wires. The technical solutions and legal standardizations for addressing the steering and braking systems, were not defined at this time. Today, OEMs are starting E/E-Architecture transformations for manifold reasons and now have the chance to remove the long hydraulic tubes for braking and the solid metal columns used for steering. X-by-wire is the way forward and allows for higher Autonomous Driving (AD) levels for automated driving vehicles. This offers new opportunities to design the vehicle in-cabin space. This paper will start with the introduction of x-by-wire technologies.

Supply chains, now being targeted as a pathway to the vital core of organizations around the world, have become a vital part of the industry’s cybersecurity strategy, says Kirsten Koepsel, author of SAE International’s latest book, The Aerospace Supply Chain and Cyber Security – Challenges Ahead, now available.

The scope of the document is to define the cyber-security best practices to reduce interference with normal vehicle operation, or to minimize risk as to unauthorized access of the vehicle's control, diagnostic, or data storage system; access by equipment (i.e., permanently or semi-permanently installed diagnostic communication device, also known as dongle, etc.) which is either permanently or semi-permanently connected to the vehicle's OBD diagnostic connector, either SAE J1939-13, SAE J1962, or other future protocol; or hardwired directly to the in-vehicle network.

Ensuring cybersecurity in an ECU network is challenging as there is no centralized authority in the vehicle to provide security as a service. ...While progress has been made to address cybersecurity vulnerabilities, many of these approaches have focused on enterprise, software-centric systems and require more computational resources than typically available for onboard vehicular devices.

Legacy electronic control units are, nowadays, required to implement cybersecurity measures, but they often do not have all the elements that are necessary to realize industry-standard cybersecurity controls. ...Legacy electronic control units are, nowadays, required to implement cybersecurity measures, but they often do not have all the elements that are necessary to realize industry-standard cybersecurity controls. For example, they may not have hardware cryptographic accelerators, segregated areas of memory for storing keys, or one-time programmable memory areas. ...While the UDS service $27 (Security Access) has a reputation for poor cybersecurity, there is nothing inherent in the way it operates which prevents a secure access-control from being implemented.

OBD, J1939 and UDS on CAN / IP), and a glimpse into the near future covering remote, cloud-based diagnostics and cybersecurity threats.

Written by Kirsten Koepsel, a lawyer and engineer whose work has focused on aviation cybersecurity, Supply Chain Vulnerabilities Impacting Commercial Aviation addresses the big question facing aircraft manufacturers today: keep the work in house or outsource it? ...Supply Chain Vulnerabilities Impacting Commercial Aviation discusses the differences in requirements depending on the buyer of the aircraft (governmental or not), ranging from delivery delays to risks linked to cybersecurity and the Internet of Things (IoT), including possible problems with faulty sensors and counterfeit parts.

To serve and protect As cars become more connected and automated, cybersecurity concerns are rising. Industry engineers have many tools and techniques and are now deploying encryption and standards to ensure that vehicle controls are not altered or usurped by unauthorized people.