Search Results

The growing demand for transportation fuels and the global emphasis on reducing greenhouse gas (GHG) emissions have led to increased interest in analyzing transport GHG emissions from the life-cycle perspective. ...To achieve net zero GHG emissions in Case 2, the GHG emissions of electricity generation need to be reduced by 88% of the current level. ...This paper conducts a comprehensive life-cycle analysis (LCA) of the GHG emissions associated with the methanol production process, utilizing data inventory from China in 2019.

Regulations have been established for the monitoring and reporting of greenhouse gas (GHG) emissions and fuel consumption from the transport sector. Low carbon fuels combined with new powertrain technologies have the potential to provide significant reductions in GHG emissions while decreasing the dependence on fossil fuel. ...Low carbon fuels combined with new powertrain technologies have the potential to provide significant reductions in GHG emissions while decreasing the dependence on fossil fuel. In this study, a lean-burn ethanol-diesel dual-fuel combustion strategy has been used as means to improve upon the efficiency and emissions of a conventional diesel engine. ...Compared to a baseline diesel-only operation, the ethanol-diesel dual-fuel engine yielded up to 57% lower well-to-wheels GHG emissions. Moreover, the dual-fuel combustion strategy attained higher net indicated efficiency than the conventional diesel mode from 0.6 to 2.4 MPa IMEP, with a maximum value of 47.2% at 1.2 MPa IMEP.

With regards to the HVAC systems, enhancements such as ultra-low permeation hose assemblies and adoption of low GWP refrigerant have shown promising results in reducing the direct GHG emissions by controlling refrigerant permeation & indirect GHG emissions by using compact and high efficiency compressors, compact heat exchangers, and other technologies that contribute to weight reduction and ultimately impact CO2 emissions. ...Automotive OEMs are adapting various “green” technologies to meet the upcoming and anticipated regulations for reducing direct and indirect GHG emissions equivalent to CO2. Using compact devices and lightweight components on the aggregates, OEMs get the benefit of carbon credits towards their contribution in reducing CO2 emissions.

Use of natural gas-diesel dual-fuel (NDDF) combustion in compression ignition engines is a method of reducing the net greenhouse gas (GHG) and particulate matter (PM) emissions of these engines. Compressed natural gas (NG) is injected into the intake manifold of the engine and the air-NG mixture is ignited by a direct injection of diesel in the cylinder. ...Use of the insert causes the GHG emissions to increase and decrease for diesel and NDDF combustion respectively. Additionally, use of the insert causes the NOx emissions to remain similar and increase for diesel and NDDF combustion respectively. ...By using low levels of exhaust gas recirculation, the NOx emissions of NDDF combustion can be reduced without significant impact on the GHG or PM emissions when compared to diesel combustion.

This paper provides an overview of possible engine design optimizations by utilizing highly knock-resistant potential greenhouse gas (GHG) neutral synthetic fuels. Historically the internal combustion engine was tailored to and highly optimized for fossil fuels. ...For future engine generations one of the main objectives is to achieve GHG neutrality. This means that either carbon-free fuels such as hydrogen or potential greenhouse gas neutral fuels are utilized. ...Firstly, these fuels can be produced with renewable energy and carbon capture technologies to be GHG neutral. Secondly, the C1-based fuels burn with significantly less pollutant emissions. A third advantage is the high knock resistance of those fuels.

This paper explores the potential for reducing transport-related greenhouse gas (GHG) emissions by introducing high-efficiency spark-ignition engines with a dual-fuel injection system to customize the octane of the fuels based on real-time engine requirements. ...A Well-to-Wheels (W-t-W) GHG emissions assessment was conducted to estimate the overall emissions benefits of the dual fuel system. ...However, if a pathway for naphtha and oxygenate are chosen different than petroleum source, for example, natural gas feed Fischer-Tropsch naphtha and coal base methanol, GHG emissions are worse than baseline case. When the dual fuel system was combined with downsized boosted engine technology, synergic benefit was obtained maximum 30% W-t-W CO2eq reduction (15% from downsizing, 10% from mitigating knock via a high octane component and 5% from minimizing octane upgrade process in the refinery).

Increasing fuel economy is highly demanded because of the GHG reduction today. Turbocharged downsized engines have much attention as one of the effective technology for this demand.

Recovery of kinetic energy during driving cycles is the most effective option to improve fuel economy and reduce green house gas (GHG) emissions. Flywheel kinetic energy recovery systems (KERS) may boost this efficiency up to values of about 70%.

The current Green-House Gas (GHG) emissions from diesel and petrol vehicles are reported to be 164 g CO2/km and 156 g CO2/km respectively. ...Thus, enormous research studies are been carried out for low-carbon alternative fuel-powered vehicles to reduce the overall GHG emissions. Numerous research on hydrogen as a transportation fuel has demonstrated the potential of reduced vehicular emissions compared to conventional fuels.

Optimal energy management of hybrid electric vehicles has previously been shown to increase fuel economy (FE) by approximately 20% thus reducing dependence on foreign oil, reducing greenhouse gas (GHG) emissions, and reducing Carbon Monoxide (CO) and Mono Nitrogen Oxide (NOx) emissions. This demonstrated FE increase is a critical technology to be implemented in the real world as Hybrid Electric Vehicles (HEVs) rise in production and consumer popularity. ...Once these research gaps have been filled, HEVs may have the potential to substantially increase the FE standard and remove ICE vehicles as the leading consumer of petroleum and leading contributor of GHG, CO, and NOx emissions.

This is an important goal from two viewpoints: fuel economy and greenhouse gases (GHG) containment, with benefits in terms of global warming and climate change. At the same time, traffic stops are due to the detection of other pollutants, as nitrogen oxides (NOx) and particulate matter (PMx), which are harmful for human health. ...Then, the AT strategy was tested in order to demonstrate its effectiveness, both on terms of fuel economy and GHG emissions or containment of a particular pollution, if required.

Plugin hybrid electric vehicles (PHEVs) have several attractive features in terms of reduction of greenhouse gas (GHG) emissions. Compared to conventional vehicles (CVs) that only have an internal combustion engine (ICE), PHEVs have better energy efficiency like regular hybrids (HEVs), allow for electrifying an appreciable portion of traveled miles, and have no range anxiety issues like battery-only electric vehicles (BEVs). ...Unlike GHG emissions, criteria emissions are not continuously emitted in proportional quantities to fossil fuel consumption.

As part of the midterm evaluation of the 2022-2025 light-duty GHG emissions rule, the Environmental Protection Agency (EPA) has been evaluating fuel efficiency data from tests on newer model engines and vehicles. ...The data is used as inputs to an EPA vehicle simulation model created to estimate greenhouse gas (GHG) emissions from light-duty vehicles. The Advanced Light Duty Powertrain and Hybrid Analysis (ALPHA) model is a physics-based, full vehicle computer simulation capable of analyzing various vehicle types with different powertrain technologies and showing realistic vehicle behavior and auditing of all internal energy flows in the model.

In a context of a fossil reserve depletion and reduction of greenhouse gases (GHG) emissions, the search for new energy for transport is fundamental. Among those new energies, alternative fuels and especially synthetic fuel from Fischer-Tropsch process (so-called XtL, "X-to-Liquid" fuels) seem to have an interesting potential in terms of availability and GHG emission reduction, according to the feedstock used. ...Among those new energies, alternative fuels and especially synthetic fuel from Fischer-Tropsch process (so-called XtL, "X-to-Liquid" fuels) seem to have an interesting potential in terms of availability and GHG emission reduction, according to the feedstock used. Due to the special properties of such products, especially high cetane number, several strategies of incorporation can be envisaged: as a blend in specific basestocks in order to obtain a conventional fuel or a premium fuel or as a pure component.

With rising awareness of man-made climate change the interest in measures to reduce CO2 and other greenhouse gas (GHG) emissions increases. The use of renewable liquid fuels is one way to achieve reduction of GHG emissions. ...The use of renewable liquid fuels is one way to achieve reduction of GHG emissions. Due to their different chemical composition, gasoline fuels containing significant shares of renewable components also produce different pollutant emissions including hydrocarbon (HC) emissions amongst others such as particular matter, carbon monoxide, and nitrogen oxides.

Under the proposed Green Deal program, the European Union will aim to achieve zero net greenhouse gas (GHG) emissions by 2050. The interim target is to reduce GHG by 55% by 2030. In the current debate concerning CO2-neutral powertrains, bio-fuels and e-fuels could play an immediate and practical role in reducing lifecycle engine emissions.

The importance of in-design “pairing” of low-viscosity motor oils with the ring pack and the cylinder bore characteristics in order to achieve maximum reduction in GHG emissions and improvement in fuel economy without sacrificing the endurance is elucidated. Earlier motored friction data for two different gasoline engines - Ford Duratec and Mercedes Benz M133 - using motor oils of different viscosity grades are now rationalized using AVL EXCITE® piston/bore tribology simulations.

Furthermore, since the aluminum oxidation is completely GHG free and the alumina produced by the reaction can be recycled back to aluminum, the process has a sustainable environmental management.

There is also the possibility of reducing GHG by adding biogas or synthetic natural gas. The Methane Number (MN) characterizes the knocking properties of gaseous fuels and was defined by AVL.

The continuously strengthened requirements regarding air quality and pollutant reduction as well as GHG emissions further complicate the compliance with legal standards. Especially in view of cost-sensitive applications this demand strongly collides with the EMS set-up and the sensor requirements with still increasing overall system complexity.