Search Results

This technical paper collection focuses on the general topic of combustion engine gaseous emissions (regulated and non-regulated). This includes well-to-wheels CO2 production for alternative technologies, fuel economy and all greenhouse gas emission research. It also includes hydrocarbon species and specific NOx species production over aftertreatment devices as a result of changes in fuel specification and the inclusion of bio-derived components and consideration of secondary emissions production (slip) as a result of aftertreatment.

Increasing concerns due to global warming have led to stringent regulation of greenhouse gas (GHG) emissions from diesel engines. Specifically, for GHG phase-2 regulation (2027), more than 4% improvement is needed when compared to phase-1 regulation (2017) in the light heavy-duty (LHD) diesel engine category. ...Hence, strategies for simultaneous reduction in GHG and TP NOx emissions are required to meet future regulations. This paper presents potential pathways to achieve the GHG phase-2 and the ultra-low NOx (ULN) regulations with minimum changes in engine design, while meeting the constraints that need to be considered for engine performance stability, component durability, and vehicle drivability. ...This paper presents potential pathways to achieve the GHG phase-2 and the ultra-low NOx (ULN) regulations with minimum changes in engine design, while meeting the constraints that need to be considered for engine performance stability, component durability, and vehicle drivability.

When considered along with Phase 2 Greenhouse Gas (GHG) requirements, the proposed Air Resource Board (ARB) nitrogen oxide (NOx) emission limit of 0.02 g/bhp-hr will be very challenging to achieve as the trade-off between fuel consumption and NOx emissions is not favorable. ...Each of these engine models met the 2027 Phase 2 GHG emission standards but used a different combination of technologies, including downsizing, downspeeding, variable compression ratio (VCR), cylinder deactivation, and turbocompounding. ...The results show that with appropriate selection of engine and aftertreatment technology packages, the 2027 Phase 2 GHG emission standards and the proposed 2024 ultra-low NOx emission standards can be achieved simultaneously.

Nitrous oxide (N2O), with a global warming potential (GWP) of 297 and an average atmospheric residence time of over 100 years, is an important greenhouse gas (GHG). In recognition of this, N2O emissions from on-highway medium- and heavy-duty diesel engines were recently regulated by the US Environmental Protection Agency (EPA) and National Highway Traffic Safety Administration’s (NHTSA) GHG Emission Standards. ...In recognition of this, N2O emissions from on-highway medium- and heavy-duty diesel engines were recently regulated by the US Environmental Protection Agency (EPA) and National Highway Traffic Safety Administration’s (NHTSA) GHG Emission Standards. Unlike NO and NO2, collectively referred to as NOx, N2O is not a major byproduct of diesel combustion. ...Engine-based results show that N2O emissions for this nonroad engine and aftertreatment system are below the current 0.1 g/bhp·hr on-highway GHG standard. To better understand the processes which contribute to the system-level N2O emissions seen during engine testing, reactor-based experiments were conducted to elucidate the fundamental component-level mechanisms responsible for N2O formation.

Agriculture is directly associated with climate change issues and is a major source of Greenhouse Gas (GHG) emissions. Part of the emissions are the result of burning fossil fuels such as coal, natural gas and oil in internal combustion engines of agricultural machinery. ...In addition, because of negative impacts on air quality, human health and climate change, new strategies are being developed to reduce the impacts of GHG emissions. However, it is noted that there is a lack of information that instigates emissions of non-road equipment, such as emissions from agricultural machinery. ...They set emission standards for GHG reductions by agricultural engine engines. In Brazil, the Program for the Control of Air Pollution by Automotive Vehicles (PROCONVE) is responsible for establishing the legal regulations for admissible emissions for the different categories of motor vehicles.

The proposed US LD (light-duty) greenhouse gas (GHG) regulation for 2017-25 is reviewed, as well as the finalized, first-ever, US HD (heavy-duty) GHG rule for 2014-17. ...The proposed US LD (light-duty) greenhouse gas (GHG) regulation for 2017-25 is reviewed, as well as the finalized, first-ever, US HD (heavy-duty) GHG rule for 2014-17. The paper then gives a brief, high-level overview of key emissions developments in LD and HD engine technology, covering both gasoline and diesel. ...Emissions challenges include lean NOx remediation for diesel and lean-burn gasoline to meet both the emerging NOx and GHG regulations. NOx control technologies are then summarized, including SCR (selective catalytic reduction) with ammonia, and hydrocarbon-based approaches.

One of the specific objectives of the study, and the key topic of this paper, is the quantification of greenhouse gas (GHG) emissions (CO2, N2O and CH4) along with ammonia (NH3) and regulated emissions during real-world operation of a long-haul heavy-duty vehicle, equipped with a diesel particulate filter (DPF) and urea based selective catalytic reduction (SCR) aftertreatment system for PM and NOx reduction, respectively. ...Results show the effect of road grade, ambient operating conditions, and on-board diagnostics (OBD) related to DPF and SCR aftertreatment systems on the GHG emissions and regulated constituents. Specifically, the results show the measured payload-distance specific CO2 emissions of a USEPA 2010 emissions-compliant Class 8 heavy-duty engine is higher than MY 2014 vehicle standards by 11% over the entire trip. ...The brake specific GHG emissions were lower than MY 2017 & later engine standards by a wide margin. However, the simulation tool (GEM) resulted in 13% higher CO2 emissions than measured over the entire trip.

The US finalized LD (light-duty) greenhouse gas (GHG) regulation for 2017-25. The paper then gives a brief, high-level overview of key developments in LD and HD engine technology, covering both gasoline and diesel. ...Marked improvements in engine efficiency are summarized for gasoline and diesel engines to meet both the emerging NOx and GHG regulations. HD engines are just starting to demonstrate 50% brake thermal efficiency. NOx control technologies are then summarized, including SCR (selective catalytic reduction) with ammonia, and hydrocarbon-based approaches.

In more or less all aspects of life and in all sectors, there is a generalized global demand to reduce greenhouse gas (GHG) emissions, leading to the tightening and expansion of existing emissions regulations. Currently, non-road engines manufacturers are facing updates such as, among others, US Tier 5 (2028), European Stage V (2019/2020), and China Non-Road Stage IV (in phases between 2023 and 2026). ...Gas engines require an appropriate aftertreatment technology to mitigate additional GHG releases as natural gas engines have challenges with methane (CH4) emissions that have 28 times more global warming potential compared to CO2. ...Under stoichiometric conditions a three-way catalytic converter (TWC - stoichiometric combustion) can be used to effectively reduce emissions of harmful pollutants such as nitrogen oxides and carbon monoxide (CO) as well as GHG like methane. The aim of the present study is to understand the performance of the catalytic converter in function of the engine operation and coolant temperature in order to optimize the catalyst operating conditions.

The formation of these salts can reduce the availability of NH3 for NOx conversion, block active catalyst sites, and result in the formation of N2O, a regulated Greenhouse Gas (GHG). In this study, we investigate the effect of hydrothermal aging on the formation and decomposition of ammonium nitrate on a state-of-the-art Cu/zeolite selective catalytic reduction (SCR) catalyst.

Besides that, it was analyzed their applications and paradigms that corroborate the international targets for reducing greenhouse gas emissions (GHG - Greenhouse Gas Emissions) such as CO2 and consumption of fossil fuels. As a result of this revision it was generated a descriptive list of potential sources of renewable energy developments related to the energy conversion between various mechanisms, such as energy recovery from shocks and brakes, thermoelectric generators (TEG) on engine and exhaust system, fuel cell systems among others, providing than a scenery of technological innovation opportunities.

Current legislative trends regarding diesel emissions are striving to achieve two seemingly competing goals: simultaneously lowering NOx and greenhouse gas (GHG) emissions. These two goals are considered at odds since lower GHG emissions (e.g. CO2) is achieved via high combustion efficiency that result in higher engine out NOx emissions and lower exhaust gas temperatures [1, 2].

The Paris Agreement on climate change declared governments’ intentions to reduce greenhouse gas (GHG) emissions as outlined in each country’s nationally determined contribution. Providing affordable energy to support prosperity while reducing environmental impacts, including the risks of climate change, is the dual challenge for the energy and transport industries. ...Development and deployment of low-emission liquid fuels and complementary engine hardware optimization could provide options to meet air quality as well as proposed, ambitious greenhouse gas (GHG) reduction targets. To take advantage of these potential benefits, these fuels must be compatible with the existing fleet and comply with current fuel standards.

Abstract Nitrous oxide (N2O) is both an ozone depleting gas and a potent greenhouse gas (GHG), having a global warming potential (GWP) value nearly 300 times that of carbon dioxide (CO2). ...Consequently, N2O emissions from motor vehicles do not represent a significant contribution to global GHGs.

Key developments are summarized for gasoline and diesel engines to meet both the emerging NOx and GHG regulations. HD engines are demonstrating more than 50% brake thermal efficiency using methods that can reasonably be commercialized.

The regulative environment is poised for ultra-low emissions in the 2024+ time frame with ultra-low NOx proposals from CARB and PN PEMS testing requirements from EU. GHG emissions limits are getting tighter in the next few years along with extended full useful life (FUL) requirements.

.: HDD Phase 2 GHG). A High-Porosity Substrate with increased Vanadia catalyst loading is a viable solution to achieve higher conversion efficiency targets at low exhaust temperatures (< 300oC).

Key developments are summarized for gasoline and diesel engines to meet both the emerging NOx and GHG regulations. HD engines are or will soon be demonstrating 50% brake thermal efficiency using common approaches.

Key developments are summarized for gasoline and diesel engines to meet both the emerging criteria and greenhouse gas (GHG) regulations. Several LD gasoline concepts are achieving 10-15% and some up to 35% reductions relative to gasoline direct injection (GDI) engines of today.

During the first year of the competition, the goal of the WVU EcoEvolution Team was to design a novel hybrid-electric powertrain for a 2009 Saturn Vue to increase pump-to-wheels fuel economy, reduce criteria tailpipe emissions and well-to-wheels greenhouse gas emissions (GHG) while maintaining or improving performance and utility. To this end, WVU designed a 2-Mode split-parallel diesel-electric hybrid system.