Search Results

They will include spacecraft such as the planned Space Station and large antenna/reflector structures for communications and observations. ...Concepts for construction of these spacecraft on orbit and their materials of construction provide some unique research challenges.

In the study the incident radiation spectra are transported through the spacecraft structure/magnetic shield using the deterministic space radiation transport computer codes developed at Langley Research Center.

The LIDAR In-Space Technology Experiment (LITE) will employ LIDAR techniques to study the atmosphere from space. The LITE instrument will be flown in the Space Shuttle Payload Bay with an earth directed orientation. The experiment thermal control incorporates both active and passive techniques. The Laser Transmitter Module (LTM) and the System Electronics will be actively cooled through the shuttle pallet coolant loop. The Receiver System and Experiment Platform will be passively controlled through the use of insulation and component surface properties. This paper explains the thermal control techniques used and the analysis results, with primary focus on the Receiver System.

A description is given of a computer program developed at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) for the assessment of manned space station environmental control and life support systems (ECLSS) technology. The program methodology along with the data base and mission model variables are given for 17 candidate technologies that show potential for supplying metabolic oxygen and water on manned space missions. The data base includes metabolic design loads associated with crew activity, engineering design parameters for each technology option, and cost data required for candidate life cycle cost comparisons. The method for ranking the candidate options in order to provide recommendations for space station application or subsequent development is presented.

Seventeen Environmental Control and Life Support System technology options to provide metabolic oxygen and water to sustain a multiperson crew on Space Station missions have been evaluated. The options included state-of-the-art technologies as well as advanced technologies that offer the potential for improvements in Environmental Control and Life Support Systems performance. The methodology for candidate technology recommendations was based upon specific assessment criteria as functions of prelaunch development activities and postlaunch operational considerations. The electrochemical depolarized cell option for carbon dioxide concentration, the sabatier option for carbon dioxide reduction, the static feed water electrolysis option for metabolic oxygen recovery, and vapor compression distillation and multifiltration options for waste water recovery were recommended.

Tests of the Space Shuttle Orbiter nose-gear tire have been completed at NASA Langley's Aircraft Landing Dynamics Facility. The purpose of these tests was to determine the cornering and wear characteristics of the Space Shuttle Orbiter nose-gear tire under realistic operating conditions. The tire was tested on a simulated Kennedy Space Center runway surface at speeds from 100 to 180 kts. The results of these tests defined the cornering characteristics which included side forces and associated side force friction coefficient over a range of yaw angles from 0° to 12°. Wear characteristics were defined by tire tread and cord wear over a yaw angle range of 0° to 4° under dry and wet runway conditions. Wear characteristics were also defined for a 15 kt crosswind landing with two blown right main-gear tires and nose-gear steering engaged.

One of the factors needed to describe the wear behavior of the Space Shuttle Orbiter main gear tires is their behavior during the spin-up process. An experimental investigation of tire spin-up processes was conducted at the NASA Langley Research Center's Aircraft Landing Dynamics Facility (ALDF). During the investigation, the influence of various parameters such as forward speed and sink speed on tire spin-up forces were evaluated. A mathematical model was developed to estimate drag forces and spin-up times and is presented. The effect of prerotation was explored and is discussed. Also included is a means of determining the sink speed of the orbiter at touchdown based upon the appearance of the rubber deposits left on the runway during spinup.