Search Results

The aerospace industry is facing immense challenges due to increased design complexity and higher levels of integration, particularly in the electrification of aircraft. These challenges can easily impact program cost and product time to market. System electrification and electromagnetic compatibility (EMC) have become critical issues today. In the context of 3D electromagnetics, EMC electromagnetic compatibility ensures the original equipment manufacturer (OEM) that radiated emissions from various electronic devices, such as avionics or the entire aircraft for that matter, do not interfere with other electronic products onboard the aircraft.

Governance of the Unmanned Aircraft System (UAS) Control Segment (UCS) Architecture was transferred from the United States Office of the Secretary of Defense (OSD) to SAE International in April 2015.

Optimal UAS Assignments and Trajectories for Persistent Surveillance and Data Collection from a Wireless Sensor Network Developing a methodology for multiple unmanned aircraft assigned to fly optimal trajectories in order to survey and collect a pre-specified amount of data from a fixed, ground-based wireless sensor network.

Pilots may report such encounters to the FAA as UAS Sighting Reports. Sighting reports are of limited value as they are highly subjective and dependent on the pilot to accurately estimate range and altitude information.

The emission reduction potential of high boost and high injection pressures was investigated on a 4-cylinder small bore diesel engine at high rates of exhaust gas recirculation. For this reason an external boosting system was built up, which allowed to generate the desired boost pressure independent from the engine's operating point. In order to simulate conditions comparable to a real turbocharged engine, also the influence of the turbine on the exhaust back pressure was considered. The whole measurement campaign was carried out at two load points (low- and mid-load), which represent characteristic engine operating points of the Urban Driving Cycle (UDC). On the one hand could be shown, that there is an enormous potential in the reduction of particulate matter (PM) up to 75 % and of carbon monoxide (CO) up to 15 % at the mid-load point by increasing the boost pressure.

New trends in the development of combustion engines lead to changed engine operating conditions which also result in changed loads of the engine parts and functional components. The application of regenerative fuels and new exhaust after- treatment systems can for example lead to an increased input of fuel into the engine oil. Oil dilution is an issue that impacts the engine operation and life cycle and therefore gains importance during the development process of combustion engines. In order to improve oil dilution to preclude destructive amounts of fuel in the oil it is necessary to investigate and optimize the fuel in oil sorption and desorption processes. At the University of Applied Sciences Regensburg a new measurement technique has been developed that realizes the online analysis of the fuel quantity in the engine oil.

The work may also lead to similar solutions for traditional aerospace and unmanned aircraft system (UAS) industries.

This document is the SAE publication of the Department of Defense UAS Control Segment (UCS) Architecture: Use Case Trace (UCTRACE) Version 3.4(PR) approved for Distribution A public release 15.S-1859.

Connectors Lighten the SWaP Burden in UAV/MUMT Aircraft Electronics Playing Defense Uncertain Regulations Stall the Implementation of Counter-UAS Technology in The U.S. Drone Swarms A Transformational Technology Robotic Combat Vehicles Putting the Brains Behind the Brawn Effectiveness of Inter-Vehicle Communications and On-Board Processing for Close Unmanned Autonomous Vehicle Flight Formations Developing an effective cooperative communication system for unmanned aerial vehicles can increase their autonomy, reduce manpower requirements, and improve mission capabilities. Systems Engineering Approach to Develop Guidance, Navigation and Control Algorithms for Unmanned Ground Vehicle This research explores the development of a UGV capable of operating autonomously in a densely cluttered environment such as the tropical jungles or plantation estates commonly found in Asia.

Developing Object Detection Systems for Autonomous Underwater Vehicles Developing Thermoplastic Composites for Use in Commercial Aircraft An Automated System for Multi-Physics Modeling Taking the Tactical Cloud with You Small Form Factor, Modular Data Centers at the Edge of the Battlefield Remanufacturing Reimagined How Selective Electroplating Extends Service Life and Reduces the Cost of Aerospace Components Satellite Paves the Way for Improved Storm Tracking Solar-Powered Satellite Hardware in Orbit Impact of Satellite Intelligence, Surveillance and Reconnaissance on Modern Naval Operations Determining whether afloat availability of satellite ISR, a technology that is relatively new, fundamentally changed naval operations and if so, to what degree. 3D Data Acquisition Platform for Human Activity Understanding Implementing motion capture devices, 3D vision sensors, and EMG sensors to cross validate multi-modality data acquisition and address fundamental research problems involving the representation and invariant description of 3D data, human motion modeling and applications of human activity analysis, and computational optimization of large-scale 3D data.

The Role of Autonomous Unmanned Ground Vehicle Technologies in Defense Applications Information Warfare - Staying Protected at the Edge Designing Connectivity Solutions for an Electric Aircraft Future Redesigning the Systems Engineering Process to Speed Development of E-Propulsion Aircraft Four RF Technology Trends You Need to Know for Satellite Communication Device Design Manufacturer Reduces Risk and Improves Quality of Military Radar Receivers Instrumentation for Fabrication and Testing of High-Speed Single-Rotor and Compound-Rotor Systems Precision data acquisition is required to generate a comprehensive set of measurements of the blade surface pressures, pitch link loads, hub loads, rotor wakes and performance of high-speed single-rotor and compound-rotor systems to support the development of next-generation rotorcraft.

Certified Machine Learning-Based Avionics: Unlocking Safer Revolutionizing Electronic Warfare: Unleashing the Power of High-Performance Software Defined Radios Deterministic and Modular Architecture for Embedded Vehicle Systems Approximating the Material Stresses and System Requirements for Hypersonic Flight Design Approaches for Established and Emerging RF Receiver Architectures Rydberg Technologies Shows Potential of Long-Range RF with Quantum Sensor at NetModX23 New Method to Measure Wind Speed Could Unlock Drones' Potential A fundamentally different approach to wind estimation using unmanned aircraft than the vast majority of existing methods. This method uses no on-board flow sensor and does not attempt to estimate thrust or drag forces. Report on Human Factors Issues Likely to Affect Air-Launched Effects This report reviews human factors research on the supervision of multiple unmanned vehicles (UVs) as it affects human integration with Air-Launched Effects (ALE).

An eye for detail Manufacturers hone next-generation designs with advanced measurement and inspection tools. Emissions progress New European research and development efforts aim to achieve step changes in engine emissions performance. Seeing virtually everything Simulating larger systems helps engineers understand more interactions.

Everything's looking up for aircraft with Internet connections Satellites will make global connectivity possible. Composite bonds put to the test The application of adhesive bonding as a joining technology for CFRP aircraft structures is essential for the realization of novel lightweight design concepts. Aerospace leads in additive manufacturing The unique advantages of making metal parts from powder-bed additive manufacturing are looking attractive to engine manufacturers. Europe's aerospace sector at a crossroads Europe is facing a massive black hole in its future defense procurement portfolio. What will replace today's fighters and trainers when the present order backlogs have been produced?

The Auto-Tracking Antenna System, a new portable, ground-to-air antenna from Persistent Systems LLC in New York, incorporates aircraft into the Wave Relay mobile ad hoc network (MANET) to boost connectivity, communications, and distribution of critical sensor data, including full-motion video, on the networked battlefield. The precisely aimed tracking system works with the MPU5 radio and Wave Relay MANET to optimize connectivity and reliable communications to enable manned and unmanned aircraft to communicate further than ever before, officials say.

This document describes Airborne Collision Avoidance System X (ACAS X) functionality and provides the necessary interface definitions and protocols to accommodate the requirements of RTCA DO-385: Minimum Operational Performance Standards for Airborne Collision Avoidance System X (ACAS X) ACAS Xa and ACAS Xo) (latest version applies) and the requirements of RTCA DO-386: Minimum Operational Performance Standards for Airborne Collision Avoidance System X (ACAS X) ACAS Xu (latest version applies). Additionally, this document describes interfaces and protocols necessary to accommodate Cockpit Display of Traffic Information (CDTI) based on the reception of Automatic Dependent Surveillance-Broadcast (ADS-B) data and Traffic Information Services–Broadcast (TIS-B) data. The equipment becomes ACAS X with ADS-B IN applications added, as defined by RTCA DO-317C: Minimum Operational Performance Standards for (MOPS) for Aircraft Surveillance Applications (ASA) Systems (latest version applies).

Why are Aerospace & Defense Companies Embracing Additive Manufacturing? Simplifying Power Design with Modular Architectures The Role of DevSecOps in Modern Edge Systems Making Machines Curious Designing Multi-Channel Microwave Radio Systems Using Optical Interconnects Solving Military Satellite, Radar and 5G Communications Challenges with GaN-on-SiC MMIC Power Amplifiers Advanced Airborne Defensive Laser for Incorporation on Strike Fighter Aircraft A technical and operational analysis of an airborne "hard-kill" Ytterbium fiber laser-based anti-missile system for use on strike fighters. Additive Manufacturing Utilizing a Novel In-Line Mixing System for Design of Functionally Graded Ceramic Composites Exploring the development of a direct ink writing system with multimaterial and in-line mixing capabilities for printing inks composed of high solids-loaded ceramic particulate suspensions.

Engineers at Martin UAV are incorporating Wave Relay mobile ad hoc network (MANET) technology from Persistent Systems into the company’s V-BAT small, vertical takeoff-and-landing (VTOL) unmanned aerial vehicle (UAV).

When India’s MICROSAT-R was scheduled to pass through the surveillance fence, Space Fence’s gallium nitride-powered S-band ground-based radars detected multiple objects within proximity of each other and issued an automatic “breakup alert.”

A greener future for two-wheelers New BS VI emissions standards for two-wheelers are an enviro-opportunity. Additive manufacturing How 3D printing will transform the A&D support chain. Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Advances in lightweight electronics protection Conformal coatings increase reliability of aerospace and military assemblies.