Search Results

Environmental issues have a significant influence on the development of modern combustion engines. Particularly the tightening of emission limits in Europe and the USA have to be considered in the development process. One issue that influences the emissions of engines is the oil consumption of the engine and thus the reduction of the oil consumption of combustion engines has gained importance in recent years. In order to optimize the oil consumption of the engine a measurement technique is needed that allows a very accurate detection of the engine oil consumption for steady state as well as for transient engine operation points. Since conventional measurement techniques provide only limited accuracy at long measuring times and are only applicable for steady state engine operation new methods for the online detection of the engine oil consumption have to be established. New methods for the oil consumption measurement are the tracer methods.

In coming years a special focus in the field of GDI engines will be on downsized concepts and highly-charged gasoline direct injection engines. This is due to stricter emission laws, higher customer requirements, greater environmental awareness as well as high demands on materials and resources. Especially at cold start, catalyst heating and warm up operation GDI engines have an issue with oil dilution. Fuel gets into the oil pan and is mixed with the engine oil so that the physical and chemical properties of the engine oil are changed. Adjusting engine operating points to higher mean effective pressures in downsizing concepts also an additional increase of the fuel input into the engine oil occurs. At the University of Applied Sciences Regensburg measurements were carried out at a direct injected gasoline engine with lateral injector position.

The emission reduction potential of high boost and high injection pressures was investigated on a 4-cylinder small bore diesel engine at high rates of exhaust gas recirculation. For this reason an external boosting system was built up, which allowed to generate the desired boost pressure independent from the engine's operating point. In order to simulate conditions comparable to a real turbocharged engine, also the influence of the turbine on the exhaust back pressure was considered. The whole measurement campaign was carried out at two load points (low- and mid-load), which represent characteristic engine operating points of the Urban Driving Cycle (UDC). On the one hand could be shown, that there is an enormous potential in the reduction of particulate matter (PM) up to 75 % and of carbon monoxide (CO) up to 15 % at the mid-load point by increasing the boost pressure.

New trends in the development of combustion engines lead to changed engine operating conditions which also result in changed loads of the engine parts and functional components. The application of regenerative fuels and new exhaust after- treatment systems can for example lead to an increased input of fuel into the engine oil. Oil dilution is an issue that impacts the engine operation and life cycle and therefore gains importance during the development process of combustion engines. In order to improve oil dilution to preclude destructive amounts of fuel in the oil it is necessary to investigate and optimize the fuel in oil sorption and desorption processes. At the University of Applied Sciences Regensburg a new measurement technique has been developed that realizes the online analysis of the fuel quantity in the engine oil.

An eye for detail Manufacturers hone next-generation designs with advanced measurement and inspection tools. Emissions progress New European research and development efforts aim to achieve step changes in engine emissions performance. Seeing virtually everything Simulating larger systems helps engineers understand more interactions.

Why are Aerospace & Defense Companies Embracing Additive Manufacturing? Simplifying Power Design with Modular Architectures The Role of DevSecOps in Modern Edge Systems Making Machines Curious Designing Multi-Channel Microwave Radio Systems Using Optical Interconnects Solving Military Satellite, Radar and 5G Communications Challenges with GaN-on-SiC MMIC Power Amplifiers Advanced Airborne Defensive Laser for Incorporation on Strike Fighter Aircraft A technical and operational analysis of an airborne "hard-kill" Ytterbium fiber laser-based anti-missile system for use on strike fighters. Additive Manufacturing Utilizing a Novel In-Line Mixing System for Design of Functionally Graded Ceramic Composites Exploring the development of a direct ink writing system with multimaterial and in-line mixing capabilities for printing inks composed of high solids-loaded ceramic particulate suspensions.

A greener future for two-wheelers New BS VI emissions standards for two-wheelers are an enviro-opportunity. Additive manufacturing How 3D printing will transform the A&D support chain. Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Advances in lightweight electronics protection Conformal coatings increase reliability of aerospace and military assemblies.

The strategy identifies 2025 as a target year to collaborate with communities around the globe and create products focused on environmental performance, emissions and waste reduction, and lower levels of water and energy consumption at work sites.

Thousands of engineers researchers and decision makers from across the industry will converge online to collaborate on the shift to mobility in the first ever WCX Digital Summit