Search Results

Friction stir spot welding (FSSW) is applied to join advanced high strength steels (AHSS): galvannealed dual phase 780 MPa steel (DP780GA), transformation induced plasticity 780 MPa steel (TRIP780), and hot-stamped boron steel (HSBS). A low-cost Si₃N₄ ceramic tool was developed and used for making welds in this study instead of polycrystalline cubic boron nitride (PCBN) material used in earlier studies. FSSW has the advantages of solid-state, low-temperature process, and the ability of joining dissimilar grade of steels and thicknesses. Two different tool shoulder geometries, concave with smooth surface and convex with spiral pattern, were used in the study. Welds were made by a 2-step displacement control process with weld time of 4, 6, and 10 seconds. Static tensile lap-shear strength achieved 16.4 kN for DP780GA-HSBS and 13.2 kN for TRIP780-HSBS, above the spot weld strength requirements by AWS. Nugget pull-out was the failure mode of the joint.

Currently the U. S. Department of Defense (DoD) exclusively uses potassium acetate (KAc)-based runway deicing fluids (RDFs) to deice and anti-ice military runways and taxiways. Commercial airports predominantly use KAc, but some also use RDFs composed of KAc plus propylene glycol (PG) or urea plus PG. Conventional RDFs have environmental concerns due to toxicity as well as material compatibility problems such as corrosion of aircraft carbon brake-pad components, cadmium-plated landing gear, and airfield lighting fixtures. Under the Strategic Environmental Research and Development Program (SERDP), Battelle tested a series of patented - bio-based RDFs to address these issues. Tests showed that the Battelle RDFs met the mandatory Aerospace Material Specification (AMS) 1435 requirements. These new RDFs have reduced ecotoxicity compared to currently used RDFs and are compliant with all other environmental requirements.

In the new design, the electrode employs composite electrode face construction with dissimilar materials. A cylindrical insert located in the electrode face center is made of low thermal and electrical conductivity material, such as stainless steel, and an annular outer sleeve is made of stainless steel and located at periphery of the electrode. Base material of the electrode is still made of copper alloys. With this electrode design, the electrical-thermal-mechanical conditions can be improved by confining the current flow path to reduce current level required for the weld nugget formation, and optimizing electrode pressure distribution, and minimizing electrode face heating and plastic deformation.

The U.S. Department of Transportation (USDOT) established the Intelligent Vehicle Initiative (IVI) Generation 0 Field Operational Tests (FOT) to demonstrate the effectiveness and encourage the deployment of intelligent vehicle safety systems (IVSS). This paper presents a methodology for estimating potential safety benefits of IVSS from such FOTs. The metric chosen is potential reduction in number of crashes resulting from widespread deployment of the IVSS. The methodology is based on the approach developed by the National Highway Traffic Safety Administration, Federal Highway Administration, and the Volpe National Transportation Systems Center. New features of the methodology include rigorous estimates of crash probabilities combining analytical models with FOT data and detailed investigation of the variability associated with benefits estimates. Although millions of miles will be driven in the IVI Generation 0 FOTs, few crashes are anticipated.

This paper summarizes the activities and results of a preliminary human factors review for the Intelligent Vehicle Initiative (IVI) Program. The objective of the project was to identify human factors work that needs to be done early in the life cycle of the IVI program to ensure safe and well-engineered vehicles. This project was comprised of two major subtasks. Subtask 1 provided for a “Preliminary IVI Human Factors Technology Workshop” to draw together the stakeholders in the IVI program and define the technologies and the human factors issues that should be considered in developing an IVI. Subtask 2 investigated the preliminary infrastructure and human factors in-vehicle requirements for alternative candidate configurations of an IVI.

An important emerging technical area is computer-based modeling of the various manufacturing processes that are used in many diverse industries. These models are used to optimize manufacturing techniques to reduce fabrication costs and improve the service performance. One manufacturing process important in steel fabrication is welding. It can be a useful tool to aid in reducing fabrication costs and service durability by optimizing the weld process and is the subject of this paper.

The cost of electroplating zinc die castings can be reduced by employing microcracked or microporous chromium in place of conventional chromium; the former is more effective in improving corrosion performance while conserving nickel. Exposure data are examined and specifications for nickel and chromium content are presented.