Search Results

In the new design, the electrode employs composite electrode face construction with dissimilar materials. A cylindrical insert located in the electrode face center is made of low thermal and electrical conductivity material, such as stainless steel, and an annular outer sleeve is made of stainless steel and located at periphery of the electrode. Base material of the electrode is still made of copper alloys. With this electrode design, the electrical-thermal-mechanical conditions can be improved by confining the current flow path to reduce current level required for the weld nugget formation, and optimizing electrode pressure distribution, and minimizing electrode face heating and plastic deformation.

This paper addresses the modeling issues of resistance spot welds. The state of the art modeling techniques on weld process simulation, weld property prediction and weld engineering performance evaluation are presented. First, weld process simulation is performed using the incrementally coupled thermal-electrical-mechanical analyses. The resulted weld nugget size, weld residual stress and weld material property distributions are then used in determining the static performance of a single weld coupon. Comparisons with experimental measurements are presented as validations. Results generated from this single weld coupon is then used in the simulation of dynamic crush mechanism of a spot welded single hat section.

An important emerging technical area is computer-based modeling of the various manufacturing processes that are used in many diverse industries. These models are used to optimize manufacturing techniques to reduce fabrication costs and improve the service performance. One manufacturing process important in steel fabrication is welding. It can be a useful tool to aid in reducing fabrication costs and service durability by optimizing the weld process and is the subject of this paper.

This paper presents a numerical analysis of the effect of weld induced residual stress on the fatigue behavior of a T-joint. The thick-section T-joint contained 18 individual weld passes and was subjected to fully-reversed, zero-maximum, and zero-minimum fatigue cycling. The effect of the residual stress was demonstrated by comparing the result with and without residual stress. It was concluded that the local fatigue parameters (mean stress, alternating stress, and stress ratio) at the suspected crack initiation site were changed significantly by the residual stresses when the applied stress were other than fully reversed. In addition, the effect of the stress concentration at the weld was more significant that the effect of the residual stress for the applied fatigue loads levels that were considered. The analysis method presented can be used to assess weldment design and process variables.

Transient heat transfer effects in heat storage devices are examined. Material and design parameters are developed which lead to almost full utilization of the heat capacity of the storage device during cyclic operation. Particular emphasis is placed on the problems associated with high-temperature storage applications. Detailed analyses are carried out for three storage element configurations, namely: flat plates heated on two sides, hollow cylinders heated internally, and solid cylinders heated externally. In general, it is found that storage utilization depends on material properties, fluid properties, geometry, heat transfer coefficient, and cycle time in a unique manner. Pumping power requirements are also evaluated as functions of above quantities.