Search Results

There are numerous activities in the automotive industry in which a vehicle drives a pre-defined route multiple times such as portable emissions measurement systems testing or real-world electric vehicle range testing. The speed profile is not the same for each drive cycle due to uncontrollable real-world variables such as traffic, stoplights, stalled vehicles, or weather conditions. It can be difficult to compare each run accurately. To this end, this paper presents a method to compare and quantify the repeatability of real-world on-road vehicle driving schedules using dynamic time warping (DTW). DTW is a well-developed computational algorithm which compares two different time-series signals describing the same underlying phenomenon but occurring at different time scales. DTW is applied to real-world, on-road drive cycles, and metrics are developed to quantify similarities between these drive cycles.

Crashes involving Cummins powered heavy vehicles can damage the electronic control module (ECM) containing heavy vehicle event data recorder (HVEDR) records. When ECMs are broken and data cannot be extracted using vehicle diagnostics tools, more invasive and low-level techniques are needed to forensically preserve and decode HVEDR data. A technique for extracting non-volatile memory contents using non-destructive board level techniques through the available in-circuit debugging port is presented. Additional chip level data extraction techniques can also provide access to the HVEDR data. Once the data is obtained and preserved in a forensically sound manner, the binary record is decoded to reveal typical HVDER data like engine speed, vehicle speed, accelerator pedal position, and other status data. The memory contents from the ECM can be written to a surrogate and decoded with traditional maintenance and diagnostic software.

In racing, understanding how the setup and setup changes affect the racecar's ability to produce optimum longitudinal and lateral acceleration is vital to producing a winning team. To better understand and characterize how setup and setup changes affect the racecar, the use of state transition diagrams to model the vehicle's transient roll and pitch while negotiating the track is being investigated. State transition diagrams are made up of statistically significant patterns or events, and show the interconnection or transition from one state to another.1 The basic application of a state transition diagram to the phenomena of a racecar's roll and pitch is to identify the locations on the race course of the major events that make up the vehicle braking into, maneuvering through, and accelerating out of a corner. Major events that are examined include the maximum roll and pitch displacements, velocities, and accelerations.

Internal combustion engine poppet valves operate in extreme conditions. These extreme conditions are a result of the high temperatures in the combustion chamber. Especially in Motorsport applications, the high temperatures have led to the development of exotic metallic alloys that can operate in this environment. One key problem in developing materials for poppet valves is that it is necessary to know the temperature at which they operate. This is increasingly important when developing valves from alternative materials such as fiber reinforced composites. Composite engine valves have the potential to produce substantial increases in engine performance, through substantial weight reductions, if they can be designed to withstand the environment. Research to-date has demonstrated the functionality of fiber reinforced composite intake valves that are significantly lighter than metallic valves; however, composite valve surface temperatures seem higher than expected.

Fiber reinforced, shape memory, polymer matrix, composites have recently been demonstrated in a variety of applications. Once cured, these composites, based on thermoset shape memory resins, have the ability to be semi-permanently deformed from the cured shape at elevated temperatures and then subsequently returned to the original shape. However, the vast majority of the applications demonstrated have made use of very thin composite laminates. The current research considers composite sandwich panel structures formed from shape memory composite facesheets and a rigid foam core created from shape memory resin. The goal is to investigate the potential deformability in these much more rigid geometries to assess the potential for use in conformable, structural applications.

A measurement system based on photogrammetry has been developed and used to measure the “as-assembled” geometry of a variety of racecar suspensions. A standard methodology for photographing a suspension, and special targets have been developed to use with commercially available photogrammetry software. Several types of targets are discussed; these included targets to identify the center of rotation of the linkages and the orientation of the wheel mounting surface. The system is used with a 5.1 mega-pixel camera to measure the 3D geometry of a suspension in space. Physical camber and toe variation in bump is then measured and correlated with the numerical computation of camber and toe variation using a suspension kinematics package and the geometry generated using the technique.

Predictive capabilities and understanding of how energy absorbing composite structures can be constructed, without additional size or weight, are necessary in order to ensure the deceleration of the driver is kept below human threshold levels. Often, the deceleration rate is modified by changes in the core or crushable material of the composite structure. In the current research, carbon fiber energy attenuators were designed, constructed, and tested to demonstrate the ability to tailor the energy absorbing profile through changes of the fiber orientation and ply stacking sequence. Reinforcing wraps of uni-directional carbon fiber were used to modify a baseline ply sequence and improved response was recorded in each case.

A study is presented in which light-weight composite materials are used for an engine intake valve. This paper is an interim progress report and documents the successful demonstration of a net-shape, resin transfer molded intake valve in a running engine. A short review of a previous dynamic model is presented showing the advantages in engine performance by using the composite valves. It is shown that the use of reduced mass composite valves allows for increased engine speed and/or more aggressive cam profiles without sacrificing valve strength or stiffness while at the same time maintaining reliable operation. The use of composite materials allows for a significant weight reduction compared to more conventional materials such as steel and titanium. A brief review of the use of composite materials is presented. The development and design process for carbon fiber reinforced valves is discussed.

Achieving maximum downforce during cornering is critical in the aerodynamic design of a race car. During cornering, all race cars will be at some angle of yaw relative to the vehicle velocity vector, and in certain forms of racing the yaw angle can be large. For this reason it is important to take into consideration the effect of yaw on the aerodynamic characteristics of the vehicle. Most aerodynamic elements on vehicles have been examined in some detail in straight ahead motion. However, an element such as a wing/end plate combination optimized for straight forward motion may not perform well under yaw conditions. This effect may substantially diminish the aerodynamic advantage for race cars in high yaw, such as those raced at the Pike's Peak Hill Climb. As a part of a comprehensive research program relating to optimized aerodynamics at high yaw angles, the effect of end plate design on lift and drag of a rear wing in free stream is being considered.

A current general need within Six Sigma methodologies is to utilize statistical methods including experimental design in the confirmation of new processes and their parameters. This is typically done in the improve step of the DMAIC process. This need is even more evident in microjoining (small scale resistance welding) due to the number and complexity of the process variables. This paper outlines the improve step of a Six Sigma project in which statistical methods are applied to a microjoining process. These statistical methods include linear experimental design, regression analysis with linear transformation and mathematical modeling. The paper documents the methodology used to establish process parameters in microjoining of an electrical lead frame design.

Quality issues in magnet wire stripping and soldering have led to continuous improvement efforts in ignition coil manufacturing using Six Sigma methodologies. This effort has resulted in the investigation of an alternative product and process design, microjoining. This paper describes the continuation of development occurring during the improvement phase of a Six Sigma project. The confirmation of the results is accomplished through the use of experimental design, response surface methodologies, mathematical modeling and optimization of the process. Nonlinear design of experiments have been used to confirm a breakthrough microjoining process developed that is an alternative to soldering. The statistical methods used to develop the process build on the current documented research efforts.