Search Results

Compression molded SMC composed of chopped carbon fiber and resin polymer which balances the mechanical performance and manufacturing cost presents a promising solution for vehicle lightweight strategy. However, the performance of the SMC molded parts highly depends on the compression molding process and local microstructure, which greatly increases the cost for the part level performance testing and elongates the design cycle. ICME (Integrated Computational Material Engineering) approaches are thus necessary tools to reduce the number of experiments required during part design and speed up the deployment of the SMC materials. As the fundamental stage of the ICME workflow, commercial software packages for SMC compression molding exist yet remain not fully validated especially for chopped fiber systems. In the present study, SMC plaques are prepared through compression molding process.

Woven fabric carbon fiber/epoxy composites made through compression molding are one of the promising choices of material for the vehicle light-weighting strategy. Previous studies have shown that the processing conditions can have substantial influence on the performance of this type of the material. Therefore the optimization of the compression molding process is of great importance to the manufacturing practice. An efficient way to achieve the optimized design of this process would be through conducting finite element (FE) simulations of compression molding for woven fabric carbon fiber/epoxy composites. However, performing such simulation remains a challenging task for FE as multiple types of physics are involved during the compression molding process, including the epoxy resin curing and the complex mechanical behavior of woven fabric structure.

There has been a rapid increase in popularity of multipurpose All-terrain vehicles (ATV) across the globe over the past few years. SAE BAJA event gives student-community an opportunity to delve deeper into the nitty-gritty of designing a single seat, four-wheeled off road vehicle. The design and development methodology presented in this paper is useful in conceptualization of an ATV for SAE BAJA event. The vehicle is divided into various subsystems including chassis, suspension, drive train, steering, and braking system. Further these subsystems are designed and comprehensively analyzed in software like SolidWorks, ANSYS, WINGEO and MS-Excel. The 3-D model of roll cage is designed in SolidWorks and analyzed in ANSYS 9.0 for front, rear and side impact along with front and side roll-over conditions. Special case of wheel bump is also analyzed. Weight, wall thickness and bending strength of tubing used for roll cage are comprehensively studied.

While much research has focused on improving terrain mobility, energy and fuel efficiency of terrain trucks, only a limited amount of investigation has gone into analysis of power distribution between the driving wheels. Distribution of power among the driving wheels has been shown to have a significant effect on vehicle operating characteristics for a given set of operating conditions and total power supplied to the wheels. Wheel power distribution is largely a function of the design of the driveline power dividing units (PDUs). In this paper, 6×6/6×4 terrain truck models are analyzed with the focus on various combinations of PDUs and suspension systems. While these models were found to have some common features, they demonstrate several different approaches to driveline system design.

One of the most important means used for suppressing squeal noise in disc brakes is the application of shims on the pad backplates. In many cases this proves a very efficient tool depending on the type of shim applied in the specific cases. Building up knowledge on the effects of shims have been ongoing for several years, and measuring the important parameters characterizing the shims is crucial for understanding how to develop and implement the shims in an optimal way. Several methods are described in literature for measuring the constrained layer damping effect and one method is described for direct measurement of the shear stiffness and shear damping properties. However, up to now no method has been available that can measure and characterize the normal stiffness and damping properties of shims. This is one of the most important properties of shims as it controls the de-coupling effect in the direction of the normal forces.

Modern project management including brake testing includes the exchange of reliable results from different sources and different locations. The ISO TC22/SWG2-Brake Lining Committee established a task force led by Ford Motor Co. to determine and analyze root causes for variability during dynamometer brake performance testing. The overall goal was to provide guidelines on how to reduce variability and how to improve correlation between dynamometer and vehicle test results. This collaborative accuracy study used the ISO 26867 Friction behavior assessment for automotive brake systems. Future efforts of the ISO task force will address NVH and vehicle-level tests. This paper corresponds to the first two phases of the project regarding performance brake dynamometer testing and presents results, findings and conclusions regarding repeatability (within-lab) and reproducibility (between-labs) from different laboratories and different brake dynamometers.

A new system reliability allocation methodology was applied on a steering product. The methodology makes use of design failure modes and effects analysis (DFMEA) and allows the allocation percentages to reflect differences in the criticality levels of the subsystems or components. The methodology was applied in conjunction with system reliability target setting. The paper first explores existing reliability allocation methods. It then introduces the new methodology. Finally, a real-life case is presented to show how the methodology was adopted and how and why it was modified. The approach presented here is one more way to make full use of the analytical efforts that have gone into the DFMEA.

The transfer function required to control an electrically assisted steering gear is identified using a modified FIR filtering approach. The topology of the electrically assisted steering gear is described. The modified FIR filtering approach is explained with emphasis on the frequency domain implication of window choice when performing measurements. An example is provided using an analytic model of the steering gear so that the accuracy of the technique can be evaluated on a known system. The technique is applied to measure the transfer function of an actual electrically powered steering gear on a test bench and in a rolling vehicle.

In the automotive industry, FMEA occurrence ranking is made to a standard such as SAE J1739. The SAE J1739 standard, as does other comparative standards, provides numerical probability criteria to aid ranking. Problems arise when the part or system under analysis is new, and there is no field data to estimate the probability of failure occurrence. Attempts to use qualitative verbal criteria or to go by the “feel” often result in inconsistency or large variability across and within FMEA projects. This paper presents a case study in which this problem was solved by the development of a tool that enables consistent - and efficient - FMEA occurrence rankings. The tool takes input from the user in the form of multiple-choice answers and calculates the final solution.

Computer Simulation was extensively utilized in the design and development of the Active Roll Control (ARC) system on LandRover 4X4 vehicle. An ADAMS model was developed integrating the electronic controller, hydraulic activation and vehicle model into one system of various degrees of complexity. Simulation results not only correlated well with vehicle test results, but also provided invaluable design guidelines crucial for solving key stability issues and successful product launch.

Electrically Powered Hydraulic Steering (EPHS) was developed in the early 90s and previously applied to vehicle segments B and C (small and medium-sized passenger cars). Till now more than 10 million vehicles are in the field. The advantages consist of the well known power density coming along with the flexible package. Value is added due to the consequent development and usage of electronic control realized in compact physical units. As a result key features for chassis control systems like controllability, high dynamic performance, and low energy consumption are achieved while maintaining mature and robust hydraulic components. Recent market requirements in other segments, e.g. Sport Utility Vehicles (SUV) and Light Commercial Vehicles (LCV) require higher powered motor pump units and lead to the decision to develop products in this direction.

The noise problem in a multiple-piston hydraulic pump was investigated through computer simulation combining lumped and distributed parameter models (CFD). Analysis results have shown that the source of noise is the turbulence flow and pressure perturbation in the pump gallery caused by check valve flow interference. It was identified that this flow induced noise can be reduced by modifying the check valve characteristic and its flow profile without compromising pump performance.

The HYGE impact simulator is designed to reproduce the crash pulse of a real world vehicle impact in the laboratory environment. When a crash pulse is given, it usually takes a substantial amount of works and costs to adjust operating parameters to create the desired pulse on the HYGE machine. To save the operational cost, a mathematical model of the impact simulator using Ordinary Differential Equations (ODE's) was established in the early 70's by Milan and Hegel1. This ODE modeling method provides predictions of the crash pulses generated by the HYGE impact simulator. However, during subsequent years of practice, it has been found that in some cases these predictions are inaccurate. It is because the ODE method over-simplifies the physics. To improve the prediction accuracy, more sophisticated model of the physical process must be developed. The Fluid-Structure Coupled (FSC) modeling technique was applied on this dynamics problem of the HYGE impact simulator output prediction.

This paper reports the progress that has been made to date on a research program that has as its focus extracting the full spectrum of friction material performance. In contrast to existing friction test specifications, the new program considers the rise of coefficient of friction at each application by using a statistical evaluation. The statistical evaluation allows also a batch to batch control by monitoring statistical values.

Electrically powered hydraulic steering systems (EPHS) are in mass production for about 6 years. They have been and still are very successful in the market as they follow the trend of supplying fully assembled and tested steering modules and the increasing demand for engine independent electrically powered systems. This paper illustrates the latest results of research and development in this sector leading to a new EPHS generation.

An ABS/TC proportional pressure control can be achieved by using some of the control technology applied to an electro-hydraulic brake (EHB) system. This paper describes a new method for reducing the calibration time of an EHB, and this method may be used for potential advanced ABS/TC proportional control systems. A mathematical model is established to analyze the system and by using the model some common physical relationships are identified. Calibration values of a proportional system in certain pressure ranges can be estimated instead of requiring measurement.

This paper reviews the state of the art of CAE simulation and analysis methods on disc brake squeal. It covers complex modes analysis, transient analysis, parametrical analysis, and operational simulation. The advantages and limitations of each analysis method are discussed. This review can help analysts to choose right methods and decide new lines of method development. For completeness, analytic methods dealing with continuum models are also briefly covered. This review was made from those papers that the authors are familiar with. It is not meant to be all-inclusive even though the best possible effort has been attempted.

The control of fuel delivery to minimize drivetrain oscillations is a major benefit to vehicle refinement and driveability. This paper describes the application of robust H-infinity loop-shaping control to the speed-fuel control loop. A one-degree-of-freedom controller structure (feedback only) is examined and applied to a small passenger car. Using careful implementation, the control algorithm is of low order and efficient requiring only limited microprocessor resources. The robust controller gives excellent performance when operated synchronously to engine rotation, where the dynamics become speed-dependent. Alternatively it can be operated satisfactorily at a fixed sample rate, asynchronous to engine rotation. The design is found to be eminently suitable for production.

The crash modes that occur each day on streets and highways have not changed dramatically over the past 50 years. The need to better understand those crash modes and their relation to rapidly emerging, tailorable restraint systems has intensified recently. The algorithms necessary for predicting a deployment event are based on an approach of coupling the occupant kinematics in a crash to the sensing technology that will activate the restraint system. This paper describes methods of computer modeling, occupant sensing and vehicle crash dynamics to define a crash sensing system that reacts to a complex set of input conditions to invoke an effective restraint response.

This paper demonstrates how varying conditioning patterns, or histories, affect the performance of a lining. The sequence of events a material experiences can change the behavior or output of that material. A comparison of the performance of two lining candidates based on two different dynamometer procedures reveals this.