Search Results

Technologies for further improving vehicle fuel economy have attracted widespread attention in recent years. However, one problem with some approaches is the occurrence of abnormal combustion such as low-speed pre-ignition (LSPI) that occurs under low-speed, high-load operating conditions. One proposed cause of LSPI is that oil droplets diluted by the fuel enter the combustion chamber and become a source of ignition. Another proposed cause is that deposits peel off and become a source of ignition. A four-stroke air-cooled single-cylinder engine was used in this study to investigate the influence of Ca-based additives having different properties on abnormal combustion by means of in-cylinder visualization and absorption spectroscopic measurements. The results obtained for neutral and basic Ca-based additives revealed that the former had an effect on advancing the time of autoignition.

Friction loss at the piston ring-cylinder liner interface in an internal combustion engine strongly affects the fuel economy of automobiles. However, the relationships between viscosity characteristics of engine oils and friction at ring-liner interface are not well understood. In this study, we experimentally measured ring-liner friction using a floating liner method with various formulations of engine oils. Two types of engine oils were tested: Non-Newtonian oils that contain polymer additive viscosity modifiers (VMs) and Newtonian VM-free oils. We first tested VM-free oils with different base oil viscosities and found that the dominant friction energy mechanism changed from hydrodynamic lubrication to mixed lubrication as engine oil viscosity or piston speed were decreased. Friction energy reached a minimum at this transition point.