Search Results

In the diesel field, innovative technology development has been desired for fuel injection system from the points of severe emission reduction to meet increasingly stringent emission regulation year by year respecting environmental protection and product improvement for various customer requirements including fuel consumption improvement. We have been pursuing the ideal fuel injection system which is called “ECD-U2” to meet above expectations. “ECD-U2” is the injection system of highly pressurized fuel with optimum injection timing by using of the injector controlled by high speed response magnetic valve. This system also has the fuel injection pattern controllability in one injection ( injection rate ) as one of the greatest asset. This report focuses on the new injector structure development to achieve desirable injection rate shaping for diesel engine combustion.

The electricity stored in the battery is the only source of energy driving an electric vehicle (EV). Therefore, the target of the air conditioning system for EVs is to cool and heat the air in the cabin and demist the wind shield using a small power consumption. We have developed a dehumidifying heat pump system that consists of an interior unit constructed to separate the recirculation air flow and fresh air flow, an exterior unit capable of controlling the absorption and radiation of heat, and an inverter-controlled, electric-driven compressor. The results of an experiment using this system proved that it could provide comfortable cabin air and good visibility through the wind shield with small power consumption at ambient temperatures ranging from -10°C to 40°C.

To improve vihicle compartment comfort, there has been a great demand for the development of odor filters which reduce odors, especially external diesel exhaust odors. Therefore, in efficiently developing cabin air filter combining dust removal and deodorant functin, a quantitative formula which enables acquisition of the correlation between sensory evaluation values and instrumental analysis values of odors has been designed and verified. We developed a deodorizing filter that effectively deodorized with minimal use of deodorant, combined with a dust filter based on these figures, to develop a high-performance air conditioning cabin air filter.

In resent years,lower noise has been in high demand in small diesel engines for agricultural and industrial uses as well as automotive engines. Furthermore,emission regulations becomes more severer due to environmental concerns. In order to satisfy these objects,diesel engine combustion needs to be improved. Especially fuel injection system is the key element to control engine combustion and should be improved dramatically. This research is to pursue the ideal fuel injection system to realize optimized diesel engine combustion which creates low combustion noise and clean exhaust emission. Recent progress will be reported in fuel injection technology including injection pressure pattern, injection rate pattern, injection timing and spray pattern, etc.

In recent years, diesel engine exhaust gas regulations become more severe due to environmental concerns. Especially, particulate reduction is one of the biggest concern, and the reduction through high injection pressure has been studied.(1), (2) and (3) However, much is not yet known about the influence of changes in fuel flow inside the nozzle tip on atomization and engine performance, and there would exist a lot of room for exhaust gas reduction through the nozzle modification. In this research we found that changing the shape of the nozzle tip showed a remarkable difference in the smoke emission at low engine speed, analysis showed that difference in the flow rate at the nozzle orifice cause difference in the fuel spray droplet size and therefore the difference in the smoke emission.

In recent years, concerns with global environmental problems have become major issues. Environmental regulations such as fuel consumption/economy, for example, have become very stringent. On the other hand, the pursuit of a comfortable and spacious passenger compartment and reduced engine compartment room have become more progressive. Size and weight reduction of automotive components are necessary to cope with these requirements. With regards to the fuel filter, size reduction of the filter element is the key technology to achieve both component size and weight reduction. As to a fuel filter, the reduction of its size and weight can be accomplished by reducing the size of its element. We have studied this subject and have invented a new type of element structure. Additionally, we have developed a new filter paper which features a favorable combination of contaminant holding capacity and micron rating.

In the diesel engine field, increasingly strict emission regulations and customer requirements have necessitated advanced technology. One important subject for diesel engines is cold startability and white smoke under cold conditions. In this paper, the combustion mechanism of a multi cylinder engine under cold conditions is discussed. First, during a starting condition, it is proved that the cold flame, which is caused by previously misfired fuel during intermittent combustion, promotes good combustion on the following cycle. Secondly, following engine starting, it is estimated that there is minimum fuel quantity above which combustion is carried out. The minimum fuel quantity depends upon the temperature of the combustion chamber. Unbalance between the minimum fuel quantity and actual injection quantity results in white smoke emission.

Environmental control of the passenger compartment has become increasingly important and sophisticated. One major consideration of interior comfort is clean, healthful, aromatic air. Accordingly, two new products were developed to increase the dust removing and deodorizing effects. These are the “Air Purifier” and the air conditioner ventilation filter called the “Air Refiner”. The Air Purifier affects the air inside the vehicle, and the Air Refiner affects the air from outside the vehicle. Remarkable effects are achieved by employing a newly developed material called “Impregnated Activated Carbon Fiber (IACF)” which is utilized in both the Air Purifier and the Air Refiner. In addition to the air purification system, a new fragrance control system called the “Aroma Controller” was developed. The Aroma Controller allows the user to select from three aromatic fragrances. The fragrance is emitted intermittently by way of “1/f fluctuation control” via microcomputer control.

Concerns on environmental protection are being intensified throughout the world in recent years. Of those concerns, depletion of the ozone layer in the atomosphere caused by CFC emission into the atomosphere is the target of serious concern as shown in Fig. 1. At present, the use of CFC production is restricted by regulations at the global level, and CFC will be phased out by the end of 1995. In this regard, the authors have developed a new vehicle air conditioner to adapt to a new refrigerant HFC-134a, which is gentle to the ozone layer, and to replace CFC-12. The new refrigerant system was introduced to the market in October, 1991, and the replacement will be almost completed by the end of 1993 for the Lexus and Toyota production vehicles. This paper describes the development of the new compressor lubricant, seal rubber, hose and desiccant by taking into consideration the materials concerned and the number of technological issues involved in the new refrigerant, HFC-134a.

The purpose of this study is to make clear the relationship between flow characteristics in the nozzle and injected spray characteristics. In this paper, we discuss the effect of the sac volume in the standard hole type nozzle on fuel flow and spray. The main object of this paper is to analyze fuel flow characteristics in the nozzle by using the enlarged model nozzles. Spray investigations confirmed that reducing the sac volume causes changes in the fuel injection direction at the initial stage of injection and in the spray penetration over consecutive injection. Flow investigations in the injection hole clarified that meandering the flow in the hole causes changes in the fuel injection direction. Flow investigations in the sac chamber clarified that separating the flow from the sac wall causes meandering the flow in the hole. Furthermore, the methods to restrain the flow in the sac chamber from separating from the sac wall were discussed.

The new generation engines currently being developed tend to require cold type spark plugs, which are prone to fouling. This paper describes the development of a new Coil on Plug ignition system that resolves this problem by using the high energy and the fast secondary voltage rise time of a capacitive ignition while maintaining inductive ignition characteristics for good ignitability. To evaluate the effectiveness of the system, spark plug insulation resistance was monitored and cold tests were conducted. The results demonstrated that the new ignition system is remarkably effective: insulation resistance remains high and startability and driveability are unaffected under conditions normally leading to excessive misfires and failure to start with a conventional inductive system. To satisfy environmental concerns, automobile manufactures are increasingly turning to high compression ratio engines in view of their improved performance.

This paper reports on research conducted at Nippondenso Co., Ltd. and Meiji University on nozzles for heavy duty diesel engines. It focuses on fuel flow analysis in the nozzle, a key component of Fuel Injection Systems (FIS). The optimum design nozzle improves fuel flow and spray characteristics. A newer and tougher emission regulation from the EPA for heavy duty diesel engines will be inevitable from 1998 onward. The goal of every company is to design new FIS in advance which meet the regulations of the future rather than paying for expensive developing costs after new laws have come into effect. To meet the regulation, requirements for FIS are higher injection pressure and injection rate control which create better fuel spray atomization and higher utilization of air. In particular, the nozzle must ensure that high injection pressure is effectively converted to fuel spray without pressure losses.

Instrument clusters used in automobiles play an important role as man-machine interface. A variety of information about the current driving situation is conveyed to the driver quickly and accurately. A great interest has been taken in the high visibility and legibility of the head-up display (subsequently abbreviated as HUD). Originally developed as display used in aeronautical applications, we have tried to exploit ways to adapt this device for automotive use. We have succeeded to produce a new HUD system, which has the following design features; (1) High brightness and high contrast display device using a liquid crystal display (subsequently abbreviated as LCD) and a halogen lamp illumination. (2) Long focus display in two colors using holographic lens. (3) Automatic dimming control system using an illuminance sensor. (see Fig. 1)

The authors developed a low-speed in-vehicle network for the body control system on passenger cars, where the most remarkable effects to reduce the number of wire harnesses could be expected. First, the authors analyzed the body control system to clarify the specifications required to build a low-speed in-vehicle network. Then the authors worked out optimum communication protocol, placing emphasis on cost reduction which is the key to expanding the applications of the low-speed in-vehicle network over wider fields. The low-speed in-vehicle network was evaluated for its performance through simulation and on-vehicle tests, and proved the practical validity of the concept. It was also verified that introducing the low-speed in-vehicle network has a satisfactory effect to reduce the number of wire harnesses.

1 Attenuation of acoustic noise from automobile components is important for passenger comfort. Since the alternator is one of the major sources of noise, many manufacturers have studied the various mechanisms which generate noise within an alternator as well as the methods to reduce the noise level. This paper presents the dynamic properties of the alternator with respect to the acoustic noise during current generation, and introduces a vibration damping structure based on experimental modal analysis. Rotating magnetic forces in a magnetic circuit (stator and rotor) can excite numerous structural resonances, resulting in acoustic noise. A modal analysis performed on the major magnetic circuit of the alternator (Nippondenso Co., Ltd.) revealed that the stator has elliptic, triangular and rectangular mode shapes in the radial coordinate plane, while the rotor does not have any significant resonances in the same 0 - 3 kHz region.

Performance optimization of small diesel engines is greatly owing to the matched improvements between combustion chamber and fuel injection system. Fuel injection characteristics are especially important to realize optimum engine performance in all speed range. In recent years, lower noise and white smoke reduction during cold temperature operation have been strongly required for agricultural and industrial application, which are the same technical trend as automotive's. As these two requirements are in the trade - off relationship from a combustive point of view, it is very complicated to realize both at the same time. Therefore, fuel injection characteristics are analyzed in detail for important factors such as injection pressure pattern, its behavior and injection timing so that the aimed optimum engine performance is obtained. This paper describes an optimization example of achieving simultaneous reduction of white smoke and noise by fuel injection characteristics' improvements.

This paper describes the Nippondenso in-line pump system designed for U.S. 1991 emissions regulation for medium duty diesel engines. With the combined use of the further improved in-line pump, NB-S and the multi-hole nozzle with a smaller orifice diameter, the required injection pressure of 100 MPa to 120 MPa at the nozzle can be achieved. However, some problems to be resolved exist in the subject fuel injection system: (1) secondary injection, (2) cavitation erosion of injection pipe, (3) higher pressure sealing of fuel, (4) undesirable fuel delivery curve vs. pump speed (called “Trumpet Shape” fuel delivery curve) Thus technical measures to cope with those problems are explained in details.

Semi-active suspension is one of many effective devices to improve vehicle stability, controllability and riding comfort. A practical means to realize semi-active suspension is to vary the damping force of the shock absorber. In this paper, we propose a new type of shock absorber using a piezoelectric sensor and actuator. The piezoelectric sensor and actuator are built into the piston rod which is a part of the shock absorber. The piezoelectric element provides a fast response and a high actuation force. We used the piezoelectric element in shock absorbers in order to take advantage of these two features. High level compatibility between stability, controllability and riding comfort is expected, since damping force changes very quickly using this new type of shock absorber. In this paper, several topics are discussed. First, a general description of the damping force control system with simple configuration is explained.

The purpose of this paper is to discuss injection rate control of the nozzle for direct injection engines. This paper will focus on fuel flow analysis of the nozzle, a key component of Fuel Injection Systems (FIS). The optimum designed nozzle improves fuel flow efficiency and controls injection rate. To meet emission regulations in 1990's, FIS are required to produce higher injection pressure and injection rate control which creates better fuel spray atomization and higher utilization of air. But the higher injection pressure makes injection rate control difficult. In particular, injection rate control by needle lift traveling control is difficult because fuel flow characteristics in the nozzle change with injection pressure and needle lift. Furthermore, the forced control of needle lift results in poor fuel spray atomization.

To meet the 1990s' requirements for diesel engines, the realization of innovative fuel injection system has been expected. Thus the fuel injection system named ECD-U2 was newly developed. ECD-U2 is the electronic unit injector system with high pressure common rail of which features are explained as follows; Fully electronic and flexible control in fuel quantity and injection timing. Adjustable injection rate shape Optimum injection pressure control Superior packageability and low drive torque loss. In this paper, design strategies, actual hardware configurations and some test results of ECD-U2 are described.