Search Results

Objectives. Examination of head injuries in the Pedestrian Crash Data Study (PCDS) indicates that many pedestrian head injuries are induced by a combination of head translation and rotation. The Simulated Injury Monitor (SIMon) is a computer algorithm that calculates both translational and rotational motion parameters relatable head injury. The objective of this study is to examine how effectively HIC and three SIMon correlates predict the presence of either their associated head injury or any serious head injury in pedestrian collisions. Methods. Ten reconstructions of actual pedestrian crashes documented by the PCDS were conducted using a combination of MADYMO simulations and experimental headform impacts. Linear accelerations of the head corresponding to a nine-accelerometer array were calculated within the MADYMO model's head simulation.

Liver trauma research suggests that rapidly increasing internal pressure plays a role in liver injury. Previous work has shown a correlation between pressure and liver injury in pressurized ex vivo human livers when subjected to blunt impacts. The purpose of this study was to extend the investigation of this relationship between pressure and liver injury by testing full-body post-mortem human surrogates (PMHS). Pressure-related variables were compared with one another and also to previously proposed biomechanical predictors of abdominal injury. Ten PMHS were tested. The abdominal vessels were pressurized to physiological levels using saline, and a pneumatic ram impacted the right side of the specimen ribcage at a nominal velocity of 7.0 m/s. Specimens were subjected to either lateral (n = 5) or oblique (n = 5) impacts, and the impact-induced pressures were measured by transducers inserted into the hepatic veins and inferior vena cava.

In many manual transmissions, conditions for the onset of vibro-impacts from an unloaded gear pair are more likely than from an engaged set. Although some of the general characteristics of neutral gear rattle are known, no specific analytical models are available in the literature that can explain interactions between unloaded and loaded gear pairs in the drive rattle mode. For the sake of illustration, a particular problem for a light duty truck is studied in this paper and dynamic interactions are investigated. Some experimental measurements are first presented to define the unloaded gear rattle problem. Linear and non-linear mathematical models of the driveline are developed to understand, quantify and control the rattle problem. Trends predicted by simulations are compared with those observed in experiments. The effects of various gear run-ups and vibratory drag torques are investigated.

The advent of the Hybrid III crash test dummy marked the beginning of biofidelic anthropomorphic test devices. During the development of its critical components, notably the head, neck, knee, and thorax, biomechanical cadaver test results were incorporated into the design. The result was a dummy that represented the 50th percentile male during idealized impacts. In order to achieve a more biofidelic response from the components, many exotic materials and unique designs were utilized. The thorax, for instance, incorporates a spring steel rib design laminated with a viscoelastic polymeric composite material to damp the response. This combination results in the proper hysteretic losses necessary to model the human thorax under impact loading conditions. The disadvantage of this design is that the damping material properties are highly sensitive to temperature. A variation of more than 5 degrees Fahrenheit dramatically affects the response of the thorax.

In this paper, we propose an IC engine fuel system diagnostic algorithm based on a discrete-event nonlinear observer using the production oxygen sensor. A mean value engine model is used to describe the engine dynamics. A procedure for designing the discrete event based observer is presented and applied to estimate important engine variables using the measured binary oxygen sensor output. The estimated variables are then used to perform diagnostics of the fuel system of the IC engine. Experimental results on a multi-cylinder production engine are presented to demonstrate the effectiveness of the proposed method.

Variable valve lift strategies were evaluated using a Water Analog Engine Simulation Rig with 3-D Particle Tracking Velocimetry (3-D PTV) to measure the 3-D flow field at the end of the intake stroke. The measurements were carried out with a 4-valve, pent-roof type head. The intake valves were actuated by independently controlled servo systems to allow various valve lift profiles to be implemented in software. For each configuration, a minimum of 100 cycles were acquired and processed. Ensemble averaged 3-D mean and fluctuating flow fields were extracted. In addition, a number of integrated parameters (total and fluctuating kinetic energy; swirl, tumble and cross-tumble ratios) were calculated for each case.

The sources of gear rattle in automotive transmission and other components are clearance non-linearities, which include backlashes, multi-valued springs, hysteresis, etc. Periodic vibro-impacts are generated because of the single sided or double sided impacts. It is obviously desirable to develop an appropriate computer simulation model which can aid in the control of transient noise and vibration signatures. Such models can also be used to design experiments and to interpret measured data. Several approaches have been attempted in the past, but most common is the digital simulation of the governing differential equations describing the non-linear, torsional dynamics of the drivetrain. Some progress has been made in understanding the basic rattle phenomenon and in developing suitable mathematical models. This article intends to be a status report on the mathematical or computer models including pre- and post-processing considerations.

Shrink flanging is a major sheet forming operation to produce convex flanges in structural sheet metal components. Flanges are used for appearance, rigidity, hidden joints, and strengthening of the edge of sheet parts such as automobile front fender and complex panels formed by stretch/draw forming. Wrinkling around the flange edge is the major defect in shrink flanging operation. There has been a lack of reliable mathematical modeling to predict the strains and wrinkles in shrink flanging operations. A trial-and-error approach has been usually practiced in tooling and process designs. In this paper, a wrinkling criterion in shrink flange is proposed based on a simplification from a general criterion for a doubly curved anisotropic shell. The mathematical model for strain analysis in shrink flanging is established based on Wang and Wenner's strain model for stretch flange. Shrink flanging experiments were conducted to validate the theories.

A distributed parameter mathematical model of a complete power steering hydraulic transmission circuit has been developed and implemented on a personal computer to analyze the effect of tuning cables on the attenuation of pressure waves generated by the pump. Tuning cables, flexible tubes positioned coaxially inside a length of hose placed at a convenient location in the circuit, reduce fluidborne noise primarily by destructive interference and viscous damping. The model uses a transfer matrix approach that includes two-dimensional viscous flow and three-dimensional fluid-structure interaction. It can be used for sizing and positioning tuning cable devices in power steering as well as other hydraulic systems prior to verification testing of the circuit.

Plane strain bending (e.g. bending about a straight line) is a major sheet forming operation and it is practiced as brake bending (air bending, U-die, V-die and wiping-die bending). Precise prediction of springback is the key to the design of the bending dies and to the control of the process and press brake to obtain close tolerances in bent parts. In this paper, reliable mathematical models for press brake bending are presented. These models can predict springback, bendability, strain and stress distributions, and the maximum loads on the punch and die. The elasto-plastic bending model incorporates the true (nonlinear) strain distribution across the sheet thickness, Swift's strain hardening law, Hill's 1979 nonquadratic yield criterion for normal anisotropic materials, and plane strain deformation mode.

The objective of this paper is to investigate the effect of padding on the human thorax. Different types of padding are used in the computer simulations. Lumped models are developed to perform the simulations. Through the responses of the simulations one can determine what kind of padding is desired. This paper provides the first phase of using a computer-aided tool. Though much attention has been paid to either the investigation of padding or human thorax modelling, how the physical properties of padding affect thoracic protection is not well known. The combination of padding and the thorax needs a lot of effort to unveil their relationship. This paper attempts to provide the guideline of what a good padding material should be. The determination of an optimal padding is one of the goals in this study. Hopefully, the results of this paper can make a contribution to the vehicle safety design, especially the car door.

This paper presents an overview of the evolution of computer simulations in vehicle collision and occupant kinematic reconstructions. The basic principles behind these simulations, the origin of these programs and the evolution of these programs from a basic analytical mathematical model to a sophisticated computer program are discussed. In addition, a brief computer development history is discussed to demonstrate how the evolution of computer assisted vehicle accident reconstruction becomes feasible for a reconstructionist. Possible future research in computer reconstruction is also discussed.