Search Results

In the absence of a physical driveline between the wheels powered by individual electric motors, in this paper, a concept of the virtual driveline system was applied to a small skid-steering unmanned ground vehicle (UGV) for the purpose of controlling its maneuverability, i.e., for fulfilling desired maneuvers in terrain zones constrained by natural and man-made objects. The virtual driveline concept supposes that the UGV driving wheels are connected via a virtual driveline that is a computational code to manage the power split among the wheels by using characteristics of a mechanical driveline system. The kinematic discrepancy factor (KDF) as a mechanical driveline characteristic is utilized to mathematically link the angular velocities and the drive torques of the electrically driven wheels.

When a vehicle moves over uneven ground, motion of the sprung and unsprung masses causes dynamic shifting in the load transmitted to the ground, making the normal reaction in the tire-soil patch a continuously changing wheel parameter that may affect vehicle performance. At high loads, sinkage of the wheel can become high as the wheel digs into the soil. At low loads, the wheel can have difficulty acquiring sufficient traction. Additionally, steerability of the wheel can be diminished at very low loads. Controlling the damping forces in the suspension that is usually used to improve ride quality and stabilize motion of the sprung mass can result in an increase in the dynamic variation of the wheel normal reaction and cause vehicle performance deterioration. In this paper, a method is developed to establish boundary constraints on the dynamic normal reaction to maintain reasonable tire-terrain mobility characteristics.

In-wheel electric motors open up new prospects to radically enhance the mobility of autonomous electric vehicles with four or more driving wheels. The flexibility and agility of delivering torque individually to each wheel can allow significant mobility improvements, agile maneuvers, maintaining stability, and increased energy efficiency. However, the fact that individual wheels are not connected mechanically by a driveline system does not mean their drives do not impact each other. With individual torques, the wheels will have different longitudinal forces and tire slippages. Thus, the absence of driveline systems physically connecting the wheels requires new approaches to coordinate torque distribution. This paper solves two technical problems. First, a virtual driveline system (VDS) is proposed to emulate a mechanical driveline system virtually connecting the e-motor driveshafts, providing coordinated driving wheel torque management.

This paper presents an analysis of coupled longitudinal and lateral dynamics of a 4×4 hybrid-electric off-road vehicle (HEV) with two passive driveline systems, including drivelines with (i) an interaxle open symmetrical differential in the transfer case and (ii) a locked transfer case, i.e., positive engagement of two axles. The axle differentials are open. As the study proved, lateral dynamics of the 4×4 HEV, characterized by the tire side forces, vehicle lateral acceleration, yaw rate and tire gripping factors can be impacted by the tire longitudinal forces, whose magnitudes and directions (positive-negative) strongly depend on the driveline characteristics. At the same time, the tire side forces impact the relation between the longitudinal forces and tire slippages.

Through inverse dynamics-based modeling and computer simulations for a 6×6 Unmanned Ground Vehicle (UGV) - a 6×6 truck - in stochastic terrain conditions, this paper analytically presents a coupled impact of different driveline system configurations and a suspension design on vehicle dynamics, including vehicle mobility, and energy efficiency. A new approach in this research work involves an estimation of each axle contribution to the level of potential mobility loss/increase and/or energy consumption increase/ reduction. As it is shown, the drive axles of the vehicle interfere with the vehicle's dynamics through the distribution of the wheels' normal reactions and wheel torques. The interference causes the independent system dynamics to become operationally coupled/fused and thus diminishes vehicle mobility and energy efficiency. The analysis is done by the use of new mobility indices and energy efficiency indices which are functionally coupled/fused.

An open-link locomotion module (OLLM) is an autonomous energy self-sufficient locomotion setup for designing ground wheeled vehicles of a given configuration that includes drive/driven and steered/non-steered wheels with individual suspension and brake systems. Off-road applications include both trucks and trailers. The paper concentrates on the module's electro-hydraulic suspension design and presents results of analytical and experimental studies of a trailer with four driven (no wheel torque applied) open-link locomotion modules. On highly non-even terrain, the suspension design provides the sprung mass with sufficient vibration protection at low level of normal oscillations, enhanced damping and stabilized angular movements. This is achieved by the introduction of two control loops: (i) a fast-acting loop to control the damping of the normal displacements; and (ii) a slow-acting control loop for varying the pressure and counter-pressure in the suspension system.

An open-link locomotion module, comprising a driving wheel with an electric motor, a system of electro-hydraulic suspension, and an electro-hydraulic power steering system, is presented in this paper as the basis for the modular design of unmanned (robotic) ground vehicles. The open-link-type configuration allows the module to be functionally integrated and engineered with a system of similar modules and thus virtually allows to compile vehicles with any required number of driving wheels. The overall dimensions and carrying capacity of the tire used in the module, as well as technical characteristics of the suspension and power steering systems make possible to employ the module for commercial ground vehicle applications. This paper considers technical issues related to designing the locomotion module.

Two characteristics of terrain mobility are essential in designing an unmanned ground vehicle (UGV): (i) the ability of a vehicle to move through terrain of a given trafficability and (ii) the obstacle performance, i.e., the ability to avoid, interact with and overcome obstacles encountered on a preset route of a vehicle. More attention has been given to the vehicle geometry including selection of the angles of approach and departure, radii of longitudinal and lateral terrain mobility, and the steering system configuration. An essential effect is exhibited by the tire properties in their interaction with the support surface; this, in turn, affects traction properties of the wheel and, thus, vehicle terrain mobility. However, the influence of power distribution between the driving wheels together with vehicle steering system on the two above-listed characteristics of terrain mobility has not been considered in depth.

The Federal Motor Vehicle Safety Standards (FMVSS) require rear seat, lap/shoulder belts to “fit” Hybrid III dummies ranging in size from a 6 year old child (H3-6C) to a 95th-percentile-male (H3-95M). No dynamic performance FMVSS, however, exist for rear seat belt systems. Variations in the three-dimensional “fit” of the same lap-shoulder belt positioned around these extreme dummy sizes suggest a possible difference in performance. The purpose of this study was to assess the performance of two production lap-shoulder belt designs in a large SUV buck on a rebound sled using instrumented H3-6C, 5th-percentile-female (H3-5F) and H3-95M dummies. Sled velocities were approximately 35 kph. Test instrumentation included: lap and shoulder belt load transducers, triaxial accelerometers at the center of gravity of the head, triaxial accelerometers and a deflection gauge in the chest, and six-axis force (and moment) transducers in the neck of the dummy.

Catastrophic head and spinal injuries have been reported to older children, properly restrained in the back seats of motor vehicles. The interaction of small stature occupants in contemporary, rear restraint systems has not yet been reported in controlled frontal oblique sled test conditions. Such data is fundamental to understanding potential mechanisms of injuries and effective countermeasures. The purpose of this study was three fold: (1) to conduct a series of controlled sled tests to determine the critical angle at which torso roll-out from the shoulder belt occurs in 6 year old Hybrid III (H3-6C) and 5th percentile female Hybrid III (H3-5F) dummies, (2) to compare dummy injury measures to the standard Injury Assessment Reference Values (IARVs) as a function of impact angle, and (3) to assess the influence of belt pretensioners and anchorage geometry as countermeasures to submarining and torso rollout dummy kinematics.